NHTSA ID Number: 11001928
Manufacturer Communication Number: 2024.8.100_0524.pdf
TSB/Document Date: 2024-06-20
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
To access the cargo area inside the rear trunk, push down on the ridged portion of the handle of the cargo cover and then pull
up. You can then adjust the position of the cargo cover or completely remove it.
176
Owner's Manual
Owners Manual
Rear Trunk Load Limits
Distribute the weight of cargo as evenly as possible between the front and rear trunks.
CAUTION: Never load more than 176 lbs (80 kg)in the upper compartment of the rear trunk or more than 285 lbs (130
kg) in the lower compartment. Doing so can cause damage.
CAUTION: Never load more than 88 lbs (40 kg) in the lower compartment of the rear trunk or more than 287 lbs (130 kg)
on the upper compartment. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's Gross Vehicle Weight Rating (GVWR) (see Specifications
on page 834). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo.
Interior Emergency Trunk Release
An illuminated mechanical release located inside the rear trunk allows you to open the rear trunk from the inside if
CybertruckModel SModel XModel 3Model Y has no electrical power. This mechanical release also allows a person locked
inside to get out.
Owner's Manual
177
Owners Manual
1. Remove the cover by pulling its lower edge very firmly toward you.
2. Pull the cable to release the latch.
3. Push the rear trunk open.
1. Firmly press and hold the illuminated button in the direction of the arrow to release the latch.
2. While pressing the button, push the rear trunk open.
178
Owner's Manual
Owners Manual
NOTE: The button glows for several hours after a brief exposure to ambient light.
WARNING: Do not allow children to play inside the trunk or become locked inside. An unrestrained child could suffer
serious injury or death in a crash. A child could suffer heat exhaustion or death if trapped in the vehicle, especially
without climate control on. If your CybertruckModel SModel XModel 3Model Y is equipped with Tesla built-in rear
facing child seats, see Tesla Built-In Rear Facing Child Seats on page 313 and ensure all restrictions, instructions, and
warnings are followed.
Owner's Manual
179
Owners Manual
Front Trunk
Opening
To open the front trunk, ensure CybertruckModel SModel XModel 3Model Y is in Park, and then do one of the following before
pulling the hood open:
• Touch Controls > Front Trunk on the touchscreen.
• Touch Controls > Frunk on the touchscreen.
• Touch the associated Open icon on the touchscreen.
• Double-click the front trunk button on the key fob.
• Touch the front trunk button in the mobile app.
180
Owner's Manual
Owners Manual
Owner's Manual
181
Owners Manual
The instrument panel displays when a door, trunk, or liftgate is open.
When a door or trunk/liftgate is open, the instrument panel displays the Door Open indicator light. The image of
your CybertruckModel SModel XModel 3Model Y on the touchscreen also displays the open front trunk.
When a door or trunk is open, the touchscreen displays the Door Open indicator light. The image of your
CybertruckModel SModel XModel 3Model Y on the touchscreen also displays the open front trunk.
When a door or trunk/liftgate is open, the touchscreen displays the Door Open indicator light. The image of
your CybertruckModel SModel XModel 3Model Y on the touchscreen also displays the open front trunk.
WARNING: Before opening or closing the hood, it is important to check that the area around the hood is free of
obstacles (people and objects). Failure to do so may result in damage or serious injury.
Closing
The CybertruckModel SModel XModel 3Model Y hood is not heavy enough to latch under its own weight and applying
pressure on the front edge or center of the hood can cause damage.
To properly close the hood:
1. Lower the hood until the striker touches the latches.
2. Place both hands on the front of the hood in the areas shown (in green), then press down firmly to engage the latches.
3. Carefully try to lift the front edge of the hood to ensure that it is fully closed.
182
Owner's Manual
Owners Manual
Owner's Manual
183
Owners Manual
184
Owner's Manual
Owners Manual
Owner's Manual
185
Owners Manual
186
Owner's Manual
Owners Manual
CAUTION: To prevent damage:
• Apply pressure only to the green areas shown. Applying pressure to the red areas can cause damage.
• Do not close the hood with one hand. Doing so applies concentrated force in one area and can result in a dent or
crease.
• Do not apply pressure to the front edge of the hood. Doing so can crease the edge.
• Do not slam or drop the hood.
• To avoid scratches, don't have anything in your hands (keys). Jewelry can also cause scratches.
WARNING: Before driving, you must ensure that the hood is securely latched in the fully closed position by carefully
trying to lift the front edge of the hood upward and confirming there is no movement. It is the driver's responsibility to
ensure that the front trunk is properly closed before driving.
If a falcon wing door or the front trunk is left open when you attempt to shift out of Park, a notification requiring you to confirm
your intent to drive appears on the touchscreen. The falcon wing doors may automatically close once you begin to accelerate.
In addition, your vehicle speed is limited if you choose to keep the front trunk open while driving.
If the front trunk is left open when you attempt to shift out of Park, a notification requiring you to confirm your intent to drive
appears on the touchscreen. If you choose to keep the front trunk open while driving, your vehicle speed is limited.
The front trunk locks when:
• You lock CybertruckModel SModel XModel 3Model Y using the touchscreen, key or mobile app.
• You leave CybertruckModel SModel XModel 3Model Y carrying your key (if Walk-Away Door Lock on page 156Walk-Away
Door Lock on page 142 is turned on).
• Valet mode is active (see Valet Mode on page 508).
Front Trunk Load Limit
Distribute the weight of cargo as evenly as possible between the front and rear trunks.
Owner's Manual
187
Owners Manual
CAUTION: Never load more than 110 lbs (50 kg) in the front trunk. Doing so can cause damage.
CAUTION: Never load more than 300 lbs (136 kg) in the front trunk. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's Gross Vehicle Weight Rating (GVWR) (see Specifications
on page 834). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo.
Interior Emergency Release
An illuminated interior release button inside the front trunk allows a person locked inside to get out.
188
Owner's Manual
Owners Manual
Press the interior release button to unlatch the front trunk, then push up on the hood.
NOTE: The interior release button glows following a brief exposure to ambient light.
WARNING: People should never climb inside the front trunk. Never shut the front trunk when a person is inside.
WARNING: Care should be taken to ensure that objects inside the front trunk do not bump against the release button,
causing the hood to accidentally open.
Owner's Manual
189
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 107), the center console
includes cup holders, two storage compartments, various chargers (see Interior Electronics on page 56), and a rear
touchscreen.
To open the main storage compartment, squeeze the latch under the front lip. Open the front storage compartment by sliding
its cover forward.
190
Owner's Manual
Owners Manual
CybertruckModel SModel XModel 3Model Y has two cupholders that slide out under the rear touchscreen.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row. This console
can serve as an arm rest for rear passengers.
To lower the console, press the button on the top back of the center seat. To raise the console, push it all the way upwards.
To access the storage tray and wireless phone charger (see Interior Electronics on page 56), raise the cover by pressing the
latch on the underside of it and pulling it up.
Owner's Manual
191
Owners Manual
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders or use it as an armrest.
NOTE: The rear console is self-locking in certain situations and cannot be lowered. For example, while driving on a steep slope
or during hard accelerations.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and the light turns on.
192
Owner's Manual
Owners Manual
To close the glovebox, push it upward until it latches into the closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 658).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 508). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle above the rear window in the
second row, next to the reading light. Push the coat hanger to release it. Push it again to retract it.
Owner's Manual
193
Owners Manual
194
Owner's Manual
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 107), the center console
includes cup holders, two storage compartments, various chargers (see Interior Electronics on page 56), and a rear
touchscreen.
To open the main storage compartment, squeeze the latch under the front lip. Open the front storage compartment by sliding
its cover forward.
Owner's Manual
195
Owners Manual
CybertruckModel SModel XModel 3Model Y has two cupholders that slide out under the rear touchscreen.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row. This console
can serve as an arm rest for rear passengers.
To lower the console, press the button on the top back of the center seat. To raise the console, push it all the way upwards.
To access the storage tray and wireless phone charger (see Interior Electronics on page 56), raise the cover by pressing the
latch on the underside of it and pulling it up.
196
Owner's Manual
Owners Manual
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders or use it as an armrest.
NOTE: The rear console is self-locking in certain situations and cannot be lowered. For example, while driving on a steep slope
or during hard accelerations.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and the light turns on.
Owner's Manual
197
Owners Manual
To close the glovebox, push it upward until it latches into the closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 658).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 508). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle above the rear window in the
second row, next to the reading light. Push the coat hanger to release it. Push it again to retract it.
198
Owner's Manual
Owners Manual
Owner's Manual
199
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 107), the center console
includes cup holders, two storage compartments, and a phone dock for two phones (or other devices) or a wireless phone
charger (depending on date of manufacture)a wireless phone charger (see Interior Electronics on page 40).
To open the main storage compartment, pull its cover upward. Open the other storage compartment or access the phone dock
by pressing firmly near the cover's opening edge. To close a storage compartment, push its cover down gently.
To open the main storage compartment, pull its cover upward. Open the front storage compartment by sliding its cover
forward.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders, or use it as an armrest.
200
Owner's Manual
Owners Manual
Third Row Cup Holders (7-seat models only)
If CybertruckModel SModel XModel 3Model Y is equipped with seven seats, two cup holders are located between the third
row seats.
Owner's Manual
201
Owners Manual
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row. Push the
coat hanger to release it. Push it again to retract it.
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row next to the
reading light. Push the coat hanger to release it. Push it again to retract it.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and its light turns on.
202
Owner's Manual
Owners Manual
Owner's Manual
203
Owners Manual
To close the glovebox, push it upward until it clicks into its closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 658).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 508). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Glovebox
To open the glovebox, press the switch located on the side of the touchscreen. The glovebox locks whenever
CybertruckModel SModel XModel 3Model Y is locked externally, using the key or walk-away locking. It also locks when
CybertruckModel SModel XModel 3Model Y is in Valet mode (see Valet Mode on page 508). It does not lock when you lock
CybertruckModel SModel XModel 3Model Y using the lock icon on the touchscreen's status bar.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 658).
204
Owner's Manual
Owners Manual
NOTE: If you leave the glovebox open, its light eventually turns off.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Owner's Manual
205
Owners Manual
Cup Holders
To expose a front cup holder, slide back the armrest.
To expose rear cup holders (if equipped), press and release the cup holder face plate located at the back of the center
console.
206
Owner's Manual
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 107), the center console
includes cup holders, two storage compartments, and a phone dock for two phones (or other devices) or a wireless phone
charger (depending on date of manufacture)a wireless phone charger (see Interior Electronics on page 40).
To open the main storage compartment, pull its cover upward. Open the other storage compartment or access the phone dock
by pressing firmly near the cover's opening edge. To close a storage compartment, push its cover down gently.
To open the main storage compartment, pull its cover upward. Open the front storage compartment by sliding its cover
forward.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders, or use it as an armrest.
Owner's Manual
207
Owners Manual
Third Row Cup Holders (7-seat models only)
If CybertruckModel SModel XModel 3Model Y is equipped with seven seats, two cup holders are located between the third
row seats.
208
Owner's Manual
Owners Manual
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row. Push the
coat hanger to release it. Push it again to retract it.
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row next to the
reading light. Push the coat hanger to release it. Push it again to retract it.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and its light turns on.
Owner's Manual
209
Owners Manual
210
Owner's Manual
Owners Manual
To close the glovebox, push it upward until it clicks into its closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 658).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 508). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Glovebox
To open the glovebox, press the switch located on the side of the touchscreen. The glovebox locks whenever
CybertruckModel SModel XModel 3Model Y is locked externally, using the key or walk-away locking. It also locks when
CybertruckModel SModel XModel 3Model Y is in Valet mode (see Valet Mode on page 508). It does not lock when you lock
CybertruckModel SModel XModel 3Model Y using the lock icon on the touchscreen's status bar.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 658).
Owner's Manual
211
Owners Manual
NOTE: If you leave the glovebox open, its light eventually turns off.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
212
Owner's Manual
Owners Manual
Cup Holders
To expose a front cup holder, slide back the armrest.
To expose rear cup holders (if equipped), press and release the cup holder face plate located at the back of the center
console.
Seating and Safety Restraints
Front and Rear Seats
Correct Driving Position
The seat, head support, seat belt and airbags work together to maximize your safety. Using these correctly ensures greater
protection.
Owner's Manual
213
Owners Manual
214
Owner's Manual
Owners Manual
Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:
1. Sit upright with both feet on the floor and the seat back in an upright position.
2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheel. Your chest
should be at least 10 inches (25 cm) from the center of the airbag cover.
3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt
tightly across your hips, not across your stomach.
CybertruckModel SModel XModel 3Model Y seats include integrated head supports in the front that cannot be adjusted or
removed.
CybertruckModel SModel XModel 3Model Y seats include integrated head supports that cannot be adjusted or removed.
Owner's Manual
215
Owners Manual
Adjusting the Driver’s Seat
1. Adjust lumbar support.
NOTE: If your Model S is equipped with adjustable head supports, this button is also used to move the head support up or
downThis button is also used to move the head support up or down (see Head Supports/Restraints on page 236). When
you touch this button, the touchscreen displays a popup with an image of the seat. If the lumbar area on the image is not
highlighted in blue, touch the lumbar area on the image to specify that you want to adjust lumbar support. The selection
you choose is retained until you manually change it.
2. Adjust backrest.
3. Move seat forward/backward.
4. Adjust the seat’s height and tilt angle.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
216
Owner's Manual
Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Adjusting the Front Seats
1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support.
Owner's Manual
217
Owners Manual
CAUTION: Do not move a front seat's backrest fully forward when the seat is also in the fully forward position. Doing so
can cause the top of the seat to hit, and potentially damage, the sun visor.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Adjusting the Front Seats
218
Owner's Manual
Owners Manual
Owner's Manual
219
Owners Manual
1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support (if equipped).
CAUTION: Do not move a front seat's backrest fully forward when the seat is also in the fully forward position. Doing so
can cause the top of the seat to hit, and potentially damage, the sun visor.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
220
Owner's Manual
Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Calibrating Seats
You can calibrate the driver seat. This is useful if you find your seat range limited or your driver profile does not automatically
adjust the seat for you. Navigate to Controls > Service > Driver Seat, Steering & Mirrors Calibration and follow the instructions
on the touchscreen.
WARNING: Ensure nothing is behind or underneath the driver seat during calibration. Failure to do so may cause serious
injury.
Folding Rear Seats
CybertruckModel SModel XModel 3Model Y has a split rear seat that can fold forward.
NOTE: If Model S is equipped with the optional executive rear seats, these seats do not fold forward.
NOTE: Driving with the rear seats folded forward can increase the amount of perceived noise and/or vibration coming from the
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.8.100_0524.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-04-30
MFR Internal Campaign ID/Software Version: 2024.8.100
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.