Touch Chargers in the Navigation search bar to toggle between types of chargers, including Superchargers and
destination charging sites.

When you are at risk of driving beyond the range of known charging locations, the touchscreen displays a message giving you
the opportunity to display a list of charging locations that are within range. When you select a charging location from the list,
CybertruckModel SModel XModel 3Model Y provides navigation instructions and the turn-by-turn direction list displays the
predicted amount of energy that will remain when you arrive at the charging destination.
Trip Planner (if available in your market region) routes you through Supercharger locations to minimize the amount of time you
spend charging and driving. To enable, touch Controls > Navigation > Trip Planner.

Energy App
The Energy app provides a visual representation of your vehicle's real-time and projected energy usage.

1376

Owner's Manual

Charging and Energy Consumption

Touch to open the Energy app and choose from the different tabs. The energy chart's colored line represents your actual
driving energy consumption whereas the gray line represents predicted usage. You can customize the chart units by touching
Controls→ Display→ Energy Display.
Drive: Monitor the amount of energy being used while driving. You can track the real-time energy consumption broken down
by categories, compare against different baseline projections, and view range tips tailored to your drive to understand how to
improve energy efficiency.
• Choose Trip while navigating to a destination to compare the actual usage against the estimated projection.
• Choose Rated to compare the actual energy or range usage against the estimated driving distance (or energy) available.
• Choose between Current Drive to view data from your current drive or Since Last Charged to include data since the vehicle
was last charged.
• View Range Tips to understand impacts on battery consumption and suggestions to maximize range and efficiency.
Park: Monitors the amount of energy lost while CybertruckModel SModel XModel 3Model Y is parked.
• Choose between Since Last Drive or Since Last Charge.
• View how much idle energy has been consumed while your vehicle is parked and suggestions to decrease energy loss.

Energy App
The Energy app provides a visual representation of your vehicle's real-time and projected energy usage.

1. Locate the Energy app in the bottom bar by touching the app launcher (the three dots).
2. Touch to open the Energy app and choose from the different tabs. The energy chart's colored line represents
your actual driving energy consumption whereas the gray line represents predicted usage.
NOTE: You can customize the chart values by touching Controls > Display > Energy Display.

• Drive: Monitor the amount of energy being used while driving. You can track the real-time energy consumption broken
down by categories, compare against different baseline projections, and view range tips tailored to your drive to
understand how to improve energy efficiency.
1. Choose Trip while navigating to a destination to compare the actual usage against the estimated projection.
2. Choose Rated to compare the actual energy or range usage against the estimated driving distance (or energy) available.
3. Choose between Current Drive to view data from your current drive or Since Last Charged to include data since the
vehicle was last charged.
4. View Range Tips to understand impacts on battery consumption and suggestions to maximize range and efficiency.
• Park: Monitors the amount of energy lost while CybertruckModel SModel XModel 3Model Y is parked.
1. Choose between Since Last Drive or Since Last Charge.
2. View how much idle energy has been consumed while your vehicle is parked and suggestions to decrease energy loss.
• Consumption: Display how much energy CybertruckModel SModel XModel 3Model Y has consumed over the past 5, 15 or
30 miles (10, 25 or 50 km).
1. Touch Instant Range to adjust the projected range estimation. Instant Range uses only the latest few data points to
estimate the projected range.
2. Touch Average Range to use the past 5, 15 or 30 miles (10, 25 or 50 km) of energy consumption to provide a more
accurate projected range.

Owner's Manual

1377

Charging and Energy Consumption
Energy App
The Energy app provides a visual representation of your vehicle's real-time and projected energy usage. To use the Energy
app, navigate to Application Launcher > Energy on the touchscreen. Choose from two types of charts:
• Consumption: Display how much energy CybertruckModel SModel XModel 3Model Y has consumed over the past 5, 15 or
30 miles (10, 25 or 50 km).
Touch Instant Range or Average Range to adjust the projected range estimation. Instant Range uses only the latest few data
points to estimate the projected range, whereas Average Range uses the past 5, 15 or 30 miles (10, 25 or 50 km) of energy
consumption to provide a more accurate projected range.
• Trip: You can monitor the amount of energy being used while navigating to a destination. You can track actual usage
against the initial prediction. The green line represents the actual usage whereas the gray line represents predicted usage.
To change the zoom level, touch the zoom icon located in the top right corner of the chart.
NOTE: The Trip chart displays energy usage only if you are currently navigating to a destination.

Range Mode
Range Mode conserves energy by limiting the power of the climate control system and turns off the signature lights. Turn
Range Mode on by touching Controls > Driving > Range Mode.When turned on in an All-Wheel Drive vehicle, Range Mode also
optimizes torque distribution between the motors to maximize range.

Saving Energy
CybertruckModel SModel XModel 3Model Y has an energy-saving feature that reduces the amount of energy being
consumed when CybertruckModel SModel XModel 3Model Y is not in use. On newer vehicles, this feature is automated to
provide an optimal level of energy saving. However, on older vehicles, you can touch Controls > Display > Energy Saving and
choose from the following options:
• OFF - CybertruckModel SModel XModel 3Model Y automatically shifts to the energy-saving mode only at night (10 pm to
5 am). Idle energy consumption may increase.
• ON - Significantly less energy is consumed whenever CybertruckModel SModel XModel 3Model Y is not in use. The startup time of the instrument paneltouchscreen and Bluetooth could be slower.
• Always Connected - Preserves cellular connectivity when energy saving is active. This allows the mobile app to connect to
CybertruckModel SModel XModel 3Model Y quicker, and provides immediate internet access when entering the car.
Slightly more energy is consumed.

Powershare Home Backup
Prerequisites
Before you can use Powershare Home Backup, make sure that the following requirements are met:
• CybertruckModel SModel XModel 3Model Y is running vehicle firmware 2024.14 or later.
• You have the Tesla mobile app version 4.31 or later (see Mobile App on page 355).
• You have the Tesla Universal Wall Connector with Powershare Gateway installed in your home.
For more information about installation and to purchase a Tesla Universal Wall Connector, go to the Tesla shop: https://
shop.tesla.com/.

To Use Powershare Home Backup
Before using Powershare Home Backup, enable it from your vehicle's instrument clustertouchscreen by touching Controls >
Charging > Powershare Home Backup .
Once Powershare Home Backup is enabled, your CybertruckModel SModel XModel 3Model Y automatically begins to provide
power to your house when:
1378

Owner's Manual

Charging and Energy Consumption
• The electric grid stops providing power to your home (there is a power outage).
CAUTION: When the grid first stops providing power to your home, your home may lose power briefly as
CybertruckModel SModel XModel 3Model Y prepares to begin Powershare Home Backup.
• The high voltage Battery has more energy remaining than the Powershare discharge limit (see Setting the Discharge Limit
on page 1380).
• CybertruckModel SModel XModel 3Model Y is connected to the Universal Wall Connector.
When Powershare Home Backup is actively providing power to your home, the instrument clustertouchscreen
displays the Tesla Powershare icon.

The charge port status light is also purple to indicate that CybertruckModel SModel XModel 3Model Y is providing power
from the high voltage Battery (see Charge Port Light on page 1370).
You can also see the status of the high voltage Battery on the instrument clustertouchscreen, or in the mobile app.

Owner's Manual

1379

Charging and Energy Consumption
1. Energy remaining: The total estimated driving distance or energy percentage (depending on your display setting) available.
The amount of energy available to Powershare Home Backup (the amount remaining above the Powershare limit) is shown
in purple.
2. Powershare rate: The amount of power currently being provided by the high voltage Battery.
3. Powershare discharge limit: The level of energy remaining at which at the high voltage Battery stops providing power.
Maximum Draw
CybertruckModel SModel XModel 3Model Y provides a maximum draw of 11.5 kW.
NOTE: The maximum draw may be limited by the charger installed in your home. Tesla strongly recommends that the charger
(such as a Tesla Wall Connector) that you use for Powershare Home Backup is connected to a 240V circuit.
Setting the Discharge Limit
You can set the discharge limit from the Tesla mobile app by adjusting the slider.
When Powershare Home Backup is active, you can see how much energy is remaining in the high voltage Battery above the
discharge limit in the vehicle status area of the touchscreen, or by touching Controls > Charging.

To Stop Powershare Home Backup
To stop CybertruckModel SModel XModel 3Model Y from providing power to your home, touch Controls > Charging > Stop
Powershare
To restart Powershare, touch Controls > Charging > Start Powershare.
Powershare Home Backup also stops providing power when:
• The high voltage Battery discharges past the Powershare discharge limit.
• The electric grid starts supplying power (the power outage ends).
When the grid is about to start providing power again, you receive a notification from the Tesla mobile app and on the vehicle
touchscreen.
CAUTION: When the grid begins providing power to your home again, your home may lose power for several seconds as
CybertruckModel SModel XModel 3Model Y stops providing power.

Limitations
Be aware of the following limitations when using Powershare Home Backup.
• While CybertruckModel SModel XModel 3Model Y is actively providing power to your home, the AC outlets in the cabin
and in the cargo bed are disabled (see Interior Electronics on page 1124 and Cargo Bed Outlets on page 1128).
If Powershare Home Backup stops providing power, you receive a notification on the vehicle touchscreen and through the
Tesla mobile app. This may happen for one of the following reasons.
• Your home is drawing more power than Powershare Home Backup can provide. In this case, reduce the load as much as
possible (for example, by turning off large appliances).
• The high voltage Battery is cold. This is more likely in low ambient temperatures (for example, if
CybertruckModel SModel XModel 3Model Y is parked in a cold garage) or if CybertruckModel SModel XModel 3Model Y
has not been driven recently.
• There is an issue with the Universal Wall Connector, with your vehicle's charge port, or with your vehicle's high voltage
Battery. Check the touchscreen for an alert with more information.

1380

Owner's Manual

Charging and Energy Consumption
Backup Troubleshooting
• If a brownout or blackout is experienced during backup operation, reduce the loads and check that the load breakers have
not opened.
NOTE: See tesla.com/support/energy/powerwall/own/best-practices-during-power-outages for best practices to extend
the backup duration of your system during an outage.
• If it is necessary to restart the Powershare Gateway, Tesla support may direct you to press the Reset button on the device.

1. Powershare Gateway RESET button
2. Powershare Gateway circuit breaker (in most whole-home backup systems)
Technical Support
If you need further assistance, contact the Tesla Support team via the Contact Us page:
tesla.com/support/energy/more/additional-support/contact-us
Have the following information available when contacting Tesla:
• Owner name
• Best way for Tesla to contact you (name, phone number, email)
• Powershare Gateway serial number
• Brief description of the issue
Find the serial number on a sticker on the panel cover of Powershare Gateway.

Owner's Manual

1381

Charging and Energy Consumption

1382

Owner's Manual

Maintenance
Software Updates
Loading New Software
Tesla updates your vehicle's software wirelessly, constantly providing new features. Tesla recommends you install software
updates at the earliest opportunity on your vehicle. To ensure the fastest and most reliable delivery of software updates, leave
Wi-Fi turned on and connected whenever possible. In most cases, your vehicle must be connected to Wi-Fi to download the
software update (see Wi-Fi on page 359).

Downloading vs. Installing New Software
There are two steps to receiving a new update: downloading the software (which requires Wi-Fi), and installing it. For your
convenience, you can start downloads and installations using the Tesla mobile app.
Download
When a software update is available for download, the download occurs automatically, showing a green arrow at the top of the
touchscreen. If the vehicle is not connected to Wi-Fi, a yellow download icon appears. Although you can drive while the
software update is being downloaded, doing so can interrupt the download if your vehicle loses the Wi-Fi connection. When
the software update is fully downloaded and ready to install, a clock icon displays at the top of the touchscreen.
NOTE: To ensure the fastest and most reliable download of software updates, leave the Wi-Fi turned on and connected
whenever possible (see Wi-Fi on page 359).
Install
You CANNOT drive while software is being installed. If plugged in, your vehicle will stop charging until the installation is
complete. To start the installation, touch the yellow clock icon at the top of the touchscreen. Touch Install Now to begin the
installation immediately or touch Set For This Time to choose a different start time. At any time before the update installs, you
can touch this clock icon to reschedule. If you are driving CybertruckModel SModel XModel 3Model Y at the scheduled
update time, the update is canceled and must be rescheduled. You can also view, download, and install software updates by
navigating to Controls > Software. If available, connect to Wi-FI to download the update.
Software updates are not performed when the following features are active:
• Smart Preconditioning
• Keep Climate On, Dog Mode, or Camp Mode
• Sentry Mode
NOTE: Software updates will not install if Keep, Dog, or Camp mode are enabled (see Keep Climate On, Dog, and Camp on
page 678Keep Climate On, Dog, and Camp on page 1337).
NOTE: On an as-needed basis, Tesla also sends software updates using a cellular connection.
NOTE: Some software updates take approximately 30 minutes to complete (some may take longer).
CybertruckModel SModel XModel 3Model Y must be in Park while the software is being updated.
WARNING: Do not attempt to use the vehicle while the software is being installed. Vehicle functions, including some
safety systems and opening or closing the doors or windows, may be limited or disabled when installation is in progress
and you could damage the vehicle.

Software Update Preferences
Tesla determines how, when, and where to send updates to vehicles based on various factors unique to each release. In
Controls > Software, you can choose how quickly you want to receive updates that are ready for your vehicle. Be an early
adopter by selecting Advanced (which will have additional releases), or wait until others have installed (which will result in
fewer releases) by selecting Standard. Choosing Advanced does not enroll your vehicle in Tesla's early access program.
Tesla does not update your software upon request for those wanting to receive the latest features and improvements.
Selecting Advanced and consistently connecting to Wi-Fi (see Wi-Fi on page 359) is the best way to quickly receive the latest
software updates.

Owner's Manual

1383

Maintenance
If the touchscreen displays a message indicating that a software update was not successfully completed, wait for the next
software update to deploy to your vehicle.
NOTE: The software update screen persists until you install the update. Install a software update as soon as possible. Any
harm resulting from failure to install a software update is not covered by the vehicle’s warranty. Failure or refusal to install
updates can cause some vehicle features to become inaccessible or digital media devices may become incompatible.
NOTE: Tesla may update or reinstall your vehicle's software as part of the normal diagnostic, repair, and maintenance process
within Tesla Service.
NOTE: Reverting to a previous software version is not possible.

Charging
If CybertruckModel SModel XModel 3Model Y is charging when the software update begins, charging stops. Charging
resumes automatically when the software update is complete.

Viewing Release Notes
When a software update is complete, read the release notes displayed on the touchscreen to learn about changes or new
features. To display release notes about the current version of your vehicle's software at any time, touch Controls > Software >
Release Notes.
Tesla strongly recommends reading all release notes. They may contain important safety information or operating instructions
for your CybertruckModel SModel XModel 3Model Y.

Maintenance Service Intervals
Service Intervals
Tesla recommends the following maintenance items and intervals, as applicable to your vehicle, to ensure continued reliability
and efficiency of your CybertruckModel SModel XModel 3Model Y.
For additional information on vehicle alerts, see Troubleshooting Alerts on page 952Troubleshooting Alerts on page
952Troubleshooting Alerts on page 1008.
• Brake fluid health check every 4 years (replace if necessary)*.
• A/C desiccant bag replacement every 24 years.
• Cabin air filter replacement every 2 years.
• HEPA filters and replacement every 3 years.
• HEPA filters and carbon filters replacement every 3 years.
• Clean and lubricate brake calipers every year or 12,500 miles (20,000 km) if in an area where roads are salted during
winter.
• Rotate tires every 6,250 miles (10,000 km) or if tread depth difference is 2/32 in (1.5 mm) or greater, whichever comes
first.
• Brake fluid health check every 4 years (replace if necessary)*.
• A/C desiccant bag replacement every 3 years.
• Cabin air filter replacement every 3 years.
• HEPA filters replacement every 3 years.
• HEPA filters and carbon filters replacement every 3 years.
• Clean and lubricate brake calipers every year or 12,500 miles (20,000 km) if in an area where roads are salted during
winter.
• Rotate tires every 6,250 miles (10,000 km) or if tread depth difference is 2/32 in (1.5 mm) or greater, whichever comes
first.
• Brake fluid health check every 4 years (replace if necessary)*.

1384

Owner's Manual

Maintenance
• A/C desiccant bag replacement every 4** years.
• Cabin air filter replacement every 2 years.
• HEPA filter replacement every 3 years.
• Clean and lubricate brake calipers every year or 12,500 miles (20,000 km) if in an area where roads are salted during
winter.
• Rotate tires every 6,250 miles (10,000 km) or if tread depth difference is 2/32 in (1.5 mm) or greater, whichever comes
first.
**A/C desiccant bag replacement can be extended to 6 years on vehicles manufactured between approximately 2017-2021.
• Brake fluid health check every 4 years (replace if necessary)*.
• A/C desiccant bag replacement every 8 years.
• HEPA filter replacement every 2 years, or every year in cases of off-road/dirt road driving.
• Clean and lubricate brake calipers every year or 12,500 miles (20,000 km) if in an area where roads are salted during
winter.
• Rotate tires every 6,250 miles (10,000 km) or if tread depth difference is 2/32 in (1.5 mm) or greater, whichever comes
first.
*Heavy brake usage due to towing, mountain descents, or performance driving -- especially for vehicles in hot and humid
environments -- may necessitate more frequent brake fluid checks and replacements.
NOTE: Any damage caused by opening the Battery coolant reservoir is excluded from the warranty.
NOTE: The above intervals are based on typical driving behaviors and scenarios. Depending on various circumstances such as
driving behavior, usage, environmental conditions, etc., the above maintenance items may need to be performed more or less
frequently than specified. Additionally, the above list should not be considered comprehensive and does not include
consumable parts such as windshield wipersthe windshield wiper, brake pads, low voltage battery (if applicable), etc.
NOTE: Damages or failures caused by maintenance or repairs performed by non-Tesla certified technicians are not covered by
the warranty.
For more do-it-yourself maintenance procedures and information, see https://www.tesla.com/support/do-it-yourself-guides.

Schedule Service
Scheduling a service visit through the mobile app is easy. After touching Service, select the type of service needed and follow
the directions in the mobile app. Provide as much detail as possible to better help the Service team identify the cause of
concern, such as:
• Photos, sound recordings, or videos.
• Date(s), time(s), and time zone when the issue occurred.
• Country of use and location.
• Approximate speed the vehicle was traveling (if applicable).
• Environmental conditions (rain, snow, cold, etc.).
• Road name and type of road (if applicable).
• Quality of lane markings (if applicable).
• Applicable vehicle settings.
• Identifiable symptoms.
Visit https://www.tesla.com/support/service-visits for more information on scheduling service.

Daily Checks
• Check the Battery’s charge level, displayed on the instrument paneltouchscreen or mobile app.
• Check the condition and pressure of each tire (see Tire Care and Maintenance on page 755Tire Pressures on page 1395).

Owner's Manual

1385

Maintenance
• Check that all exterior lights, horn, turn signals, and wipersthe wiper and washers are working.
• Check for any unexpected indicator lights or vehicle alerts on the touchscreen or instrument panel.
• Check the operation of the brakes, including the parking brake.
NOTE: Because CybertruckModel SModel XModel 3Model Y uses regenerative braking (see Regenerative Braking on page
463Regenerative Braking on page 1235), the brake pads are typically used less frequently than those in traditional braking
systems. To avoid the accumulation of rust and corrosion, Tesla recommends frequently pressing the brake pedal to apply
the mechanical brakes, which dries the brake pads and rotors.
• Check the operation of the seat belts (see Seat Belts on page 254Seat Belts on page 1156).
• Look for abnormal fluid deposits underneath CybertruckModel SModel XModel 3Model Y that might indicate a leak. It is
normal for a small pool of water to form (caused by the air conditioning system’s dehumidifying process).
• Look around the exterior of CybertruckModel SModel XModel 3Model Y and immediately remove any corrosive
substances (such as bird droppings, tree resin, tar spots, dead insects, industrial fallout, etc.) to prevent damage to the
exterior (see Cleaning on page 778).

Weekly Checks
• During wet weather, clean Autopilot cameras weekly (see Cleaning a Camera on page 780Cleaning a Camera on page
780Cleaning a Camera on page 781Cleaning a Camera on page 1139). Otherwise, clean them monthly during dry weather.

Monthly Checks
• Check windshield washer fluid level and top up if necessary (see Topping Up Windshield Washer Fluid on page 785Topping
Up Windshield Washer Fluid on page 1410).
• Check that the air conditioning system is operating correctly (see Operating Climate Controls on page 670Operating
Climate Controls on page 1335).
NOTE: In addition to cooling the interior, the air conditioning compressor also cools the Battery. Therefore, in hot weather, the
air conditioning compressor can turn on even if you turned it off. This is normal because the system’s priority is to cool the
Battery to ensure it stays within an optimum temperature range to support longevity and optimum performance. Also, even
when not in use, you may hear CybertruckModel SModel XModel 3Model Y emit a whining noise or the sound of water
circulating. These sounds are normal and occur when the internal cooling systems turn on to support various vehicle
functions, such as maintaining the low voltage battery and balancing the temperature of the high voltage Battery.

Fluid Replacement Intervals
Battery coolant and brake fluid levels should only be checked by Tesla or a professional automotive repair shop. Specific
service information is available in the Service Manual.
• Battery coolant: Your Battery coolant does not need to be replaced for the life of your vehicle under most circumstances.
NOTE: Any damage caused by opening the Battery coolant reservoir is excluded from the warranty.
• Brake fluid: Do not top up your brake fluid.

Software
Updating software is important to ensure proper operation and longevity of your vehicle's components. You must install a
software update at the earliest opportunity. See Software Updates on page 750.
Tesla may update or reinstall your vehicle's software as part of the normal diagnostic, repair, and maintenance process within
Service.

High Voltage Safety
Your CybertruckModel SModel XModel 3Model Y has been designed and built with safety as a priority. However, be aware of
these precautions to protect yourself from the risk of injury inherent in all high-voltage systems:

1386

Owner's Manual

Maintenance
• Read and follow all instructions provided on the labels that are attached to CybertruckModel SModel XModel 3Model Y.
These labels are there for your safety.
• The high voltage system has no user-serviceable parts. Do not disassemble, remove or replace high voltage components,
cables or connectors. High voltage cables are colored orange for easy identification.
• If a collision occurs, do not touch any high voltage wiring, connectors, or components connected to the wiring.
• In the unlikely event that a fire occurs, immediately contact your local fire emergency responders.
WARNING: Assume that the low voltage components of CybertruckModel SModel XModel 3Model Y, including all
cables and connectors, are always energized. 48V low voltage connectors are colored blue for easy identification, and
wires that operate at 48V are marked with blue tape.
Do not handle low voltage cables or connect/disconnect connectors when the low voltage system is powered. Because
the 48V low voltage system operates at a higher voltage than a typical low voltage system, there is an increased risk of
personal injury, arcing, or component damage if the low voltage components of CybertruckModel SModel XModel
3Model Y are handled improperly.
WARNING: Always disconnect the charge cable before working underneath CybertruckModel SModel XModel 3Model
Y, even if charging is not in progress.
WARNING: Keep your hands and clothing away from cooling fans. Some fans operate even when
CybertruckModel SModel XModel 3Model Y is powered off.
WARNING: Some fluids (Battery acid, Battery coolant, brake fluid, windshield washer additives, etc.) used in vehicles are
poisonous and should not be inhaled, swallowed, or brought into contact with open wounds. For your safety, always read
and follow instructions printed on fluid containers.

Replacing the Low Voltage Battery
You can replace the low voltage battery yourself on some vehicles. See Replacing the Low Voltage Lead-Acid Battery on page
Replacing the Low Voltage Lead-Acid Battery on page for more information and procedure instructions.

Replacing the Low Voltage Battery
You can replace the low voltage battery yourself on some vehicles. See Replacing the Low Voltage Lead-Acid Battery on page
Replacing the Low Voltage Lead-Acid Battery on page for more information and procedure instructions.

Owner's Manual

1387

Maintenance
Cleaning
Cleaning the Exterior
To prevent damage to the exterior, immediately remove corrosive substances (such as grease, oil, bird droppings, tree resin,
dead insects, tar spots, road salt, industrial fallout, etc.). Do not wait until CybertruckModel SModel XModel 3Model Y is due
for a complete wash. If necessary, use denatured alcohol to remove tar spots and stubborn grease stains, then immediately
wash the area with water and a mild, non-detergent soap to remove the alcohol.
NOTE: It is normal for the stainless steel exterior to mature over time, resulting in minor changes to the reflective properties
and color of the metal.
Dents and Scratches
The stainless steel exterior of CybertruckModel SModel XModel 3Model Y is more resistant to dents and dings than most
other vehicles. However, CybertruckModel SModel XModel 3Model Y does not have a clear coat on the surface of the exterior
body panels, meaning any scratches that appear are in the stainless steel panels themselves. Anyone performing scratch
repair should refer to the applicable "Exterior Stainless Steel Panel Refinishing" procedure within the Collision Repair Manual
on service.tesla.com. In addition, do not use, and/or immediately remove, chemical, corrosive, or non-pH neutral substances
(including but not limited to: acidic liquids or materials, grease, oil, tree resin, dead insects, tar spots, road salt, industrial
fallout, etc.) as they can cause corrosion on the vehicle's exterior.
CAUTION: Tesla is not liable for any damage caused by failing to refer to official guidance.
To prevent damage to the paint, immediately remove corrosive substances (grease, oil, bird droppings, tree resin, dead
insects, tar spots, road salt, industrial fallout, etc.). Do not wait until CybertruckModel SModel XModel 3Model Y is due for a
complete wash. If necessary, use denatured alcohol to remove tar spots and stubborn grease stains, then immediately wash
the area with water and a mild, non-detergent soap to remove the alcohol.
Surface Contamination
Over time, you may notice contamination on the surface of the stainless steel body panels. These spots may appear as orange
or brown rust. However, it is important to note that your Cybertruck is not rusting. Refer to the DIY Guide for more
information.
Keep the exterior cameras free of dirt, condensation, or obstructions. These substances can cause unclear pictures or
Autopilot and safety features to stop working (see Cleaning a Camera on page 780Cleaning a Camera on page 780Cleaning a
Camera on page 780Cleaning a Camera on page 781Cleaning a Camera on page 1139).
Follow these steps when washing the exterior of CybertruckModel SModel XModel 3Model Y:
1. Before washing, flush grime and grit from the vehicle using a hose. Flush away accumulations of mud in areas where debris
easily collects (such as wheel wells and panel seams). If salt has been used on the highways (such as during winter
months), thoroughly rinse all traces of road salt from the underside of the vehicle, wheel wells, and brakes.
2. Mix a mild, pH-neutral soap (such as car shampoo) with water until it gets soapy.
3. Soak a soft cleaning sponge in the soap mixture and hand wash CybertruckModel SModel XModel 3Model Y.
CAUTION: Some cleaners and car shampoos contain chemicals that can cause damage or discoloration, especially
for plastic trim pieces, exterior lights, or camera lenses. For example, some car cleaning formulas contain hydroxide
or other highly alkaline or caustic ingredients that can damage exterior components. Do not use acidic products
either. Damage or discoloration resulting from cleaning products is not covered by the warranty.
4. Hand wash CybertruckModel SModel XModel 3Model Y using a clean soft cloth and cold or lukewarm water and a dish
soap with mild degreasing properties. Mix the dish soap and water until it resembles water you would wash your dishes
in.mild, high-quality car shampoo.
CAUTION: Some cleaners and car shampoos contain chemicals that can cause damage or discoloration, especially
for plastic trim pieces, exterior lights, or camera lenses. For example, some car cleaning formulas contain hydroxide
or other highly alkaline or caustic ingredients that can damage exterior components. Do not use acidic products
either. Damage or discoloration resulting from cleaning products is not covered by the warranty.
5. After washing, rinse with clean water to prevent soap from drying on the surfaces.
1388

Owner's Manual

Maintenance
6. Dry thoroughly with microfiber cloths (ensure the cloths are clean of sand, dirt, rocks, etc.), one in each hand, rotating in
circular motions until the surface is dry.
7. Dry thoroughly with a chamois. If necessary, dry the brakes by going on a short drive and applying the brakes multiple
times.
For a waterless wash:
1. Hand wash using a non-ionic pH-neutral waterless wash with a high quality microfiber towel.
2. Dry any streaks thoroughly with a chamois.
3. Remove oil and grease with an organic solvent, such as alcohol or ethyl alcohol.
NOTE: Do not use alcohol or ethyl alcohol on the head or tail lights.
For spot cleaning: Use a glass cleaner and microfiber cloth. Spray glass cleaner and wipe in a zig-zag motion when cleaning
large areas, such as entire panels.
Use isopropyl alcohol wipes (such as those used to clean glasses or screens) to clean away small stains.
NOTE: Tesla does not recommend taking Cybertruck through an automatic car wash.
Cleaning Mud
If your vehicle is covered in mud, such as after off-roading, rinse the entire exterior of the vehicle with water. It is important to
regularly clean the exterior of Cybertruck after off-roading because mud and debris can quickly build up and limit some
vehicle functions.
For certain components, such as the underside, wheel wells, panel seams, and radiator, use a power washer to remove stuckon mud or debris. Then follow the rest of the regular cleaning on page 778 steps, as explained above. Wipe away mud from the
headlights, tail lights, and cameras, as it may affect your vehicle’s ability to drive safely.
CAUTION: Damage to the vehicle as a result of debris or mud buildup is not covered by the warranty.
Window Cleaning and Treatments
Clean windows and mirrors using an automotive glass cleaner. Do not scrape or use any abrasive cleaning fluid on glass or
mirrored surfaces. Follow the directions in Cleaning the Exterior on page 778 for best practices in cleaning the exterior glass.
To add a hydrophobic coating to your vehicle's windows, apply the coating only to the side and rear windows, not the front
windshield—doing so may affect the visibility of the autopilot cameras. Follow the hydrophobic coating manufacturer’s
instructions for application details.
NOTE: Tesla is not responsible for any damage associated with applying window treatments on your vehicle.
Car Wash Mode
When taking CybertruckModel SModel XModel 3Model Y to a car wash, Car Wash Mode closes all windows, locks the charge
port, and disables windshield wipers, Sentry Mode, walk-away door locking, and parking sensor chimes. To enable, touch
Controls > Service > Car Wash Mode. Your vehicle must be stationary and not actively charging.
If using an automatic car wash, Enable Free Roll keeps your vehicle in Neutral and activates free roll for the duration of the
wash, while preventing CybertruckModel SModel XModel 3Model Y from applying the Parking brake if you leave the driver's
seat. To enable, press on the brake pedal and touch Enable Free Roll; or shift into Neutral.
Car Wash Mode disables if the vehicle's speed exceeds 9 mph (15 km/h) or by touching Exit on the touchscreen.
CAUTION: Failure to put CybertruckModel SModel XModel 3Model Y in Car Wash Mode may result in damage (for
example, to the charge port or windshield wipers). Damage caused by car washes is not covered by the warranty.

Owner's Manual

1389

Maintenance
Car Wash
If taking CybertruckModel SModel XModel 3Model Y to an automatic car wash is necessary, Car Wash Mode closes all
windows, locks the charge port, and disables windshield wipers, Sentry Mode, and walk-away door locking. To enable, touch
Controls > Car Wash. Your vehicle must be stationary and not actively charging.
If using an automatic car wash, Enable Free Roll keeps your vehicle in Neutral and activates free roll for the duration of the
wash, while preventing CybertruckModel SModel XModel 3Model Y from applying the Parking brake if you leave the driver's
seat. To enable, press on the brake pedal and touch Enable Free Roll; or shift into Neutral.
Car Wash Mode disables if the vehicle's speed exceeds 9 mph (15 km/h) or by touching Exit on the touchscreen.
CAUTION: Failure to put CybertruckModel SModel XModel 3Model Y in Car Wash Mode may result in damage (for
example, to the charge port or windshield wipers). Damage caused by car washes is not covered by the warranty.
Cleaning a Camera
To ensure a clear picture, the camera lens must be clean and free of obstructions. There are two different methods to clean a
camera, depending on when your vehicle was built.
For vehicles built prior to approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens with a spray bottle. Do not attempt to remove dirt or debris by wiping an exposed lens with your hands or a cloth.
This debris can damage the surface of the lens when rubbed against it during wiping.
For vehicles built as of approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens and drying it with a microfiber cloth. Clean the camera lens every week during wet weather (snow, rain, sleet) and
every month during dry weather.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cleaning a Camera
To ensure a clear picture, the camera lens must be clean and free of obstructions. There are two different methods to clean a
camera, depending on when your vehicle was built.
For vehicles built prior to approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens with a spray bottle. Do not attempt to remove dirt or debris by wiping an exposed lens with your hands or a cloth.
This debris can damage the surface of the lens when rubbed against it during wiping.
For vehicles built as of approximately January 12, 2023: Remove any build-up of dirt or debris by spraying water onto the
camera lens and drying it with a microfiber cloth. Clean the camera lens every week during wet weather (snow, rain, sleet) and
every month during dry weather.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cleaning a Camera
To ensure a clear picture, the camera lens must be clean and free of obstructions. There are different methods to clean a
camera, depending on when your vehicle was built.
For vehicles built from Fremont and Gigafactory Austin prior to approximately late May 2023: Remove any build-up of dirt or
debris by spraying water onto the camera lens with a spray bottle. Do not attempt to remove dirt or debris by wiping an
exposed lens with your hands or a cloth. This debris can damage the surface of the lens when rubbed against it during wiping.
For vehicles built from Fremont and Gigafactory Austin as of approximately late May 2023: Remove any build-up of dirt or debris
by spraying water onto the camera lens and drying it with a microfiber cloth. Clean the camera lens every week during wet
weather (snow, rain, sleet) and every month during dry weather.

1390

Owner's Manual

Maintenance
Remove any build-up of dirt or debris by spraying water onto the camera lens with a spray bottle. Do not attempt to remove
dirt or debris by wiping an exposed lens with your hands or a cloth. This debris can damage the surface of the lens when
rubbed against it during wiping.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can
scratch or damage its surface.
Cleaning a Camera
To ensure a clear picture, the camera lens must be clean and free of obstructions.
Remove any build-up of dirt or debris by spraying water onto the camera lens and drying it with a microfiber cloth. Clean the
camera lens every week during wet weather (snow, rain, sleet) and every month during dry weather.
CAUTION: Do not use chemical-based or abrasive cleaners. Doing so can damage the surface of the lens.
CAUTION: Do not clean an ultrasonic sensor (if equipped) or camera lens with a sharp or abrasive object that can