1

1

BOLT-CRANKSHAFT PULL

*-9439-*

8

8

1

GASKET-INTAKE MANIFO

*-9E583-*

1

1

1

HPFP O-RING

W719295-*

1

1

1

HPFP SHIELD BOLT

Description

 Copyright 2024 Ford Motor Company

W714878-*

1

1

1

STEERING COLUMN SHAFT BOLT

W714869-*

8

2

4

EXH MANIFOLD STUDS

W714870-*

8

2

4

EXH MANIFOLD NUTS

*-6700-*

1

1

1

CRANKSHAFT FRONT SEAL

*-6C683-*
1
1
1
VCT SYSTEM OIL FILTER
NOTE: For additional required parts such as gaskets, fasteners, seals, etc. refer to the Workshop
Manual (WSM) procedures and/or Ford Electronic Web-Based Parts Catalogue (Ecat) or equivalent,
with a VIN, for additional parts requirements.
Order your parts requirements through normal order processing channels. To guarantee the shortest
delivery time, an emergency order for parts must be placed.
DEALER PRICE
For the latest prices, refer to DOES II.
PARTS RETENTION, RETURN, & SCRAPPING
Follow the provisions of the Warranty and Policy Manual, Section 1 - WARRANTY PARTS
RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must
be scrapped by all applicable local, state, and federal environmental protection and hazardous
material regulations. Federal law prohibits selling motor vehicle parts or components that are under
safety, compliance, or emissions recall.
EXCESS STOCK RETURN
The excess stock returned for credit must have been purchased from Ford Customer Service Division
by Policy Procedure Bulletin 4000.

 Copyright 2024 Ford Motor Company

Labor Allowances and Parts Ordering Information
Page 2 of 2
Harvest Program 24H01
REPLACED FSA PARTS INSPECTION AND SIGN OFF
Effective March 1st, 2021, all parts replaced as part of an FSA repair with a repair order open date of
March 1st, 2021, or later must be inspected and signed off on the repair order by a member of your
dealer’s fixed operations management team or an employee the task has been delegated to. If the
task is to be delegated to a non-management employee, the employee needs to be someone other
than the technician who completed the repair and needs to understand the importance of completing
this task consistently and accurately.
•

All parts replaced as part of an FSA repair should be returned to the parts department
following the Warranty Parts Retention and Return Policies.

•

Inspect the replaced parts to verify the FSA repair was completed.

•

If the FSA repair is found to be complete, the designated employee signs the repair order line
or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts
were inspected and validated to have been replaced.

•

After the parts have been inspected, they should be handled based on the guidance in the
parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.). Please
visit FMCDEALER > PARTS & SERVICE > WARRANTY ADMINISTRATION & WARRANTY
PARTS RETURN for the latest Immediate Scrap List information.

This process is subject to review during warranty audits for FSA repairs with a repair order
open date of March 1st, 2021, or later. Any eligible FSA claims requiring parts replacement
found not to have been inspected and signed off during a warranty audit will be subject to
chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair
Process.
Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer-owned vehicle
repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post-repair FSA
parts inspection process (electronic or handwritten) is independent of other warranty approval
requirements. The approval by the designated employee implies that the FSA parts were found to be
replaced and must be able to be identified on the Repair Order. If multiple FSAs require approval on a
single Repair Order, each applicable occurrence will require individual post-repair approval by the
designated employee.
•

 Copyright 2024 Ford Motor Company

Ford Motor Company
Ford Customer Service Division
PO Box 1904
Dearborn, Michigan 48121

May 2024
Harvest Program 24H01
Mr. John Sample
123 Main Street
Anywhere, USA 12345
Your Vehicle Identification Number (VIN): 12345678901234567
Ford Motor Company is conducting a product investigation and we would like to evaluate the field
performance and functionality of the left-hand engine cylinder head produced on your vehicle. Ford is
offering to replace the cylinder head and exhaust cam free of charge and will use it to further evaluate
the issue.
Why are you receiving
this notice?

Ford Motor Company is voluntarily conducting a study on certain customer
owned vehicles to proactively replace your engine’s left-hand cylinder head
and return it to Ford for further analysis. Inspecting your vehicle will help
Ford complete its investigation.

What will Ford and
your dealer do?

In the interest of customer satisfaction, Ford Motor Company has authorized
your dealer to replace the left hand cylinder head free of charge (parts and
labor) under the terms of this program.
This Harvest Program will be in effect until May 31, 2025 regardless of
mileage. Coverage is automatically transferred to subsequent owners.

How long will it take?

The time needed for this repair is less than three days. However, due to
service scheduling requirements, your dealer may need your vehicle for a
longer period of time.

What should you do?

Please call your dealer without delay to schedule a service appointment for
Harvest Program 24H01. Provide the dealer with your VIN, which is printed
near your name at the beginning of this letter.
If you do not already have a servicing dealer, you can access
ford.com/support for dealer addresses, maps, and driving instructions.
Ford Motor Company wants you to have this service action completed on
your vehicle. The vehicle owner is responsible for making arrangements to
have the work completed. Ford Motor Company can deny coverage for any
vehicle damage that may result from the failure to have this service action
performed on a timely basis. Therefore, please have this service action
performed as soon as possible.

© Copyright 2024 Ford Motor Company

Pick-Up and Delivery

Complimentary vehicle Pick-Up & Delivery service may also be available
upon request through participating dealers. Your dealer will pick up your
vehicle and return it with the repair completed.

Do you need a rental
vehicle?

Your dealer is authorized to provide a rental vehicle for your personal
transportation at no charge (except for fuel, insurance, and tax) while your
vehicle is at the dealership for repairs. Please see your dealer for guidelines
and limitations.

What if you no longer
own this vehicle?

If you no longer own this vehicle and have an address for the current owner,
please forward this letter to the new owner.
You received this notice because our records, which are based primarily on
state registration and title data, indicate that you are the current owner.

Can we assist you
further?

If you have difficulties getting your vehicle repaired promptly and without
charge, please contact your dealership's Service Manager for assistance.
RETAIL OWNERS: If you have questions or concerns, please contact our
Ford Customer Relationship Center at 1-866-436-7332 and one of our
representatives will be happy to assist you. If you wish to contact us through
the Internet, our address is: ford.com/support.
For the hearing impaired call 1-800-232-5952 (TDD). Representatives are
available Monday through Friday: 8:00 AM – 8:00 PM (Eastern Time).
FLEET OWNERS: If you have questions or concerns, please contact our
Ford Pro Contact Center at 1-800-34-FLEET, choose Option #1, and one
of our representatives will be happy to assist you. If you wish to contact us
through the Internet, our address is fleet.ford.com.
Representatives are available Monday through Friday: 7:00 AM – 11:00 PM
and Saturday 7:00 AM – 5:00 PM (Eastern Time).
(Op) MOTORHOME OWNERS: If you have questions or concerns, please
contact our Motorhome Customer Assistance Center toll-free at
1-866-906-9811. Representatives are available 24 hours a day.

Thank you for your attention to this important matter.
Ford Customer Service Division

© Copyright 2024 Ford Motor Company

Mobile Service Repair Assessment
Page 1 of 2
Harvest Program 24H01
Certain 2024 Model Year Mustang Vehicles
Left Hand Cylinder Head and Exhaust Cam Replacement
Mobile Service Repair Assessment
Assessment levels have been identified to help determine the ease of performing eligible mobile
service repairs for a Field Service Action (FSA) outside of the dealership service facility.
Dealer Bulletin
Within the Administrative Information Attachment of the dealer bulletin a mobile service repair
assessment level(s) will be provided. These assessment levels have been determined using the
amount of time, equipment and labor identified to perform the intended service action.
Assessment Levels
- Mobile Reprogramming
- Light Mobile Service
- Enhanced Mobile Service
- Advanced Mobile Service
- Wheel and Tire Mobile Service
- Not a Mobile Service Repair
Description of each level that is used to determine the overall assessment.
– Mobile Reprogramming
• Module Programming or similar type services
• Minimum tools maybe required other than an IDS/FDRS setup
• FDRS programming that requires internet connection (wi-fi or mobile hotspot)
• Make sure vehicle has a charge port to ensure battery voltage is maintained during
flashing of the module(s)
• Repairs not greater than 1 hour in length (including time to wait for programming)
Note: The location will need a charging station or wall box to maintain the 12-volt battery.

•
•
•
•

– Light Mobile Service
Interior repair procedures that do not require seat, dash, or headliner removal
Under hood repairs that do not require large component removal
Exterior repairs that do not require large component/panel removal
Repairs may require standard hand tools (Access to a Technician starter kit or similar)

 Copyright 2024 Ford Motor Company

Mobile Service Repair Assessment
Page 2 of 2
Harvest Program 24H01
Certain 2024 Model Year Mustang Vehicles
Left Hand Cylinder Head and Exhaust Cam Replacement
– Enhanced Mobile Service
A two-person process is required anytime a procedure requires work under the
vehicle
• Brake Inspection and Brake Repair/Replacement
• Limited Suspension Component replacement (no alignment)
• Under Vehicle access for limited repairs (no large component removal)
• Vehicle Check Up - VCU
• Pre-Delivery Inspection - PDI
• Used Car Inspection/Presale Inspection
• May require floor jack, jack stands, and impact tools
Note: Wheel lock may be required.
•

•
•
•

– Advanced Mobile Service
Fluid Exchange/Oil Change
Light Repairs
Brake Hydraulic Repairs

– Wheel and Tire Mobile Service
• Tire Removal from Wheel
• Tire Balancing
• Tire Repair
Note: Specialized Mobile Service unit and equipment including Tire balancer and Tire
Changer required.
– Not a Mobile Service Repair
• Large component removal
• BEV Battery Replacement
• Requires a vehicle hoist – to complete the repair (more than inspection)
• Required vehicle alignment
• Requires significant vehicle disassembly
• Repairs greater than 2-3 hours
• Any repairs that require M-Time
• Includes a service procedure where the vehicle owner may be distressed about the state
of their vehicle

 Copyright 2024 Ford Motor Company

Pick-Up and Delivery Repair Record
Page 1 of 1
Harvest Program 24H01

Vehicle Pick-Up and Delivery Record
VIN ____________________________ received (check one):
☐ Pick-up and/or delivery service
As outlined below for the 24H01 Field Service Action program.

☐ Pick-up

– Date: _______________

☐ Delivery

– Date: _______________

Repair Order #

Repair Order Date

Service Manager Signature

Date

TECHNICAL INSTRUCTIONS
PAGE 1 OF 1
HARVEST PROGRAM 24H01

CERTAIN 2024 MODEL YEAR MUSTANG VEHICLES EQUIPPED WITH A 5.0L
ENGINE — LEFT HAND CYLINDER HEAD AND EXHAUST CAMSHAFT REPLACE
SERVICE PROCEDURE
IMPORTANT! The Service Technician Specialty Training (STST) Competency 10 certification
requirement, for U.S. market only, will be enforced starting with repair orders

opened on or after April 1, 2024. Field Service Action (FSA) repairs will reject if

the repairing technician is not certified in STST Competency 10 FSA. See

Electronic Field Communication (EFC) 14251 for more details.
NOTE: If you do not have the special tools referenced in the Workshop Manual (WSM) to perform the
FSA repair, please contact 1-800 ROTUNDA and choose option 3 to place an order.
1. Replace the Left Hand (LH) cylinder head and exhaust camshaft. Follow the WSM procedures in
Section 303-01B.
• The exhaust camshaft is located on the outboard side of the cylinder head. See Figure 1.

EXHAUST
CAMSHAFT

24093A

FIGURE 1
IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are

under safety, compliance, or emissions recall. Unless a part is requested to be

returned to Ford, all parts replaced under this FSA must be scrapped in

accordance with all applicable local, state and federal environmental

protection and hazardous material regulations. Refer to the Parts Retention,

Return, & Scrapping section of the FSA dealer bulletin for further information.
CPR © 2024 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
05/2024