5/28/24, 1:54 PM

65 03 24_Service Action: Programming Complete Vehicle – Quality Update

SIM 65 03 24
Service Action: Programming Complete Vehicle – Quality Update
☒

2024-05-20

THIS REPAIR IS MOBILE FRIENDLY

MODEL
E-Series
U25

Model Description
MINI Countryman

Production Date
From December 15, 2022 to January 30, 2024

AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR, AWP,
Campaign Summary, or Warranty Vehicle Inquiry
Please make sure you check your dealer’s inventory as soon as possible. You can see a list of affected vehicles
in Inventory Campaign Details (ICD) under ROSS
For dealers that qualify, this Service Action repair is eligible to be performed via Mobile Assistance

SITUATION
Quality improvements and robustness measures are to be implemented on the affected vehicles via this
software update.
The software update improves functions in the following areas of the vehicle:
Bluetooth malfunctions
The start-up phase of the HU has been shortened (faster start of the operating system)
The number of disconnections from Apple CarPlay have been reduced
Vehicle access and the drive-ready state have been improved
The AC charging abort error has been fixed
Remote Control Parking without function

CAUSE
Unfavorable software in the vehicle.

CORRECTION
Program the complete vehicle.

PROCEDURE
Determine what is the vehicle’s current I-level by either using AIR, or AWP (Aftersales Workplace) applications.

Based on the vehicle’s current I-level, if necessary, program the vehicle to I-level U006-24-03-540 or higher
using ISTA 4.46.4x (released April 4, 2024) or higher.
Connect the battery charger to the vehicle
Connect the programming system to the vehicle (ISTA 4)
Determine measures plan
Accept and fully work through the measures plan with the control units to be programmed/encoded and
enabled
Follow the rework list
Depending on the rework list, carry out a vehicle test and delete the fault memory if needed
After the programming has been fully completed, check functionality of the system.

Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank

1/4

5/28/24, 1:54 PM

65 03 24_Service Action: Programming Complete Vehicle – Quality Update

Note: ISTA will automatically reprogram and code all programmable control modules that do not have the
latest software.
Always connect a MINI-approved battery charger/power supply (SIM 04 08 09).
For information on programming and coding with ISTA, refer to Dealer Universal Portal / TIS / Technical
Documentation / Diagnostics and Programming / Programming Documentation.

CLAIM INFORMATION
Vehicle Programming and Encoding
During this workshop visit, the affected vehicle may also show one or more programming and encoding Technical Campaign
repairs open, the programming and encoding procedure may only be invoiced one time.
Select one of these open Technical Campaigns to perform and submit for updating the vehicle to the required I-level
or higher when applicable.
Please be sure to also perform any additional before and/or after work (including attaching labels) as required by
the open campaigns on the vehicle. Close any other open programming and encoding Campaign repairs as outlined
in the corresponding Service Information Bulletin.

As determined by the above, reimbursement for this Service Action will be via normal claim entry utilizing the
work package information below that applies.
Repair Code:

0065750400

U25 Program control units (quality measures)

Below are the special flat rate labor operation code choices for this action.
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop.
Work Pkg

Labor Operation Description (Plus work)

Labor Allowance

#1

00 76 592

Programming and encoding the vehicle
control units, includes Carrying out vehicle
test (00 00 556/61 21 528)

8 FRU

00 76 593

Programming and encoding the vehicle
control units was performed in conjunction
with another campaign/repair prior to or
during this workshop visit (vehicle is
already at the specified Target integration
level or higher, no repair is necessary)

1 FRU

Or:

#2

Or:
The vehicle arrives at your dealer and this Service Action shows open (No other Main work will be
performed or claimed during this workshop visit).
Work Pkg

Labor Operation Description (Main work)

#3

00 76 076

Programming and encoding the vehicle
control units, includes Carrying out vehicle
test (00 00 006/61 21 528)

Labor Allowance
9 FRU

Or:
#4

about:blank

Programming and encoding the vehicle
1 FRU
control units was performed in conjunction
anotherofcampaign/repair
prior to or
Copyright ©2024 MINI USA,with
a division
BMW of North America,
LLC. All Rights Reserved
00 76 077

2/4

5/28/24, 1:54 PM

65 03 24_Service Action: Programming Complete Vehicle – Quality Update

during this workshop visit (vehicle is
already at the specified Target integration
level or higher, no repair is necessary)
Only one of the flat rate labor operation codes listed above can be used for claim submission/reimbursement purposes. Also,
only one Main work flat rate labor operation code can be claimed per workshop visit.

Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the technician’s RO notes and in the claim
comments (For example: B65 03 24 WP 1), unless otherwise required by State law.
Vehicle Programming and Encoding – Additional Work (RO and Claim Comments Required)
This procedure automatically reprograms and encodes any vehicle control modules that do not have the latest software Ilevel.

If one or more control modules fail during the reprogramming procedure, claim the required consequential
repair work procedures to address this issue (including performing the IRAP Control Unit Recovery first as
required, refer to the SIB in AIR) under the Repair Code in this bulletin together with the corresponding labor
operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that applies.
Please explain the additional work procedures that were performed (The why and the what) on the repair order and in the
claim comments.

For covered repairs that address control module failures that occurred prior to performing this
reprogramming procedure, claim this work with the Repair Code listed in AIR together with the
corresponding labor operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that
applies.
(*) Based on which one applies to your dealer, please refer to SI M01 01 20 or M01 04 20 for the applicable procedure for
documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis work time (WT), job/repair
work time (WT), and the vehicle repairs your dealer performed, unless otherwise required by State law.

FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback

To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department

Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank

3/4

5/28/24, 1:54 PM

65 03 24_Service Action: Programming Complete Vehicle – Quality Update

Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank

4/4