5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

SIB 17 03 24
DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

2024-05-15

Please perform the procedure outlined in this Service Information on all affected vehicles before customer
delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure
the next time the vehicle is in the shop if the campaigns have a status of remedy available. Otherwise,
please release the vehicle.
This Service Information Bulletin (Revision 1) replaces SI B17 03 24 dated April 15, 2024.
What’s New:
Cause, Correction, Procedure, Parts, and Claim Information sections added

☐

THIS REPAIR IS MOBILE FRIENDLY

MODEL
E-Series
F90
F91
F92
F93

Model Description
M5 Sedan
M8 Convertible
M8 Coupe
M8 Gran Coupe

Production Date
November 7, 2017 – September 9, 2022
July 3, 2019 – September 5, 2022
July 3, 2019 – September 9, 2022
July 3, 2019 – September 9, 2022

AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. As of April 16, 2024, you can see a
list of affected vehicles in Inventory Campaign Details (ICD) under ROSS.

SITUATION
Under certain driving situations, coolant leaks onto the fuel injectors on cylinder bank (5-8).
BMW AG has issued a Delivery Stop (effective April 15, 2024) on certain Model Year 2018 - 2023 BMW
vehicles that were produced between November 7, 2017, and September 9, 2022.
Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop,
until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery
Stop.

CAUSE
The coolant expansion tank may develop a leak over the service life of the vehicle. This leak may damage
the fuel injectors on the driver’s side cylinder bank 2 (cylinders 5-8) which are located nearly directly
beneath the tank.

CORRECTION
Check the part number of the expansion tank and, if necessary, replace the tank.

PROCEDURE
1. Follow Repair Instruction 17 11 100 Removing and installing/replacing coolant expansion tank and loosen/lift

up the tank to access the underside of the tank to read out the part number.
NOTE: At this point no coolant needs to be drained to access the part number.

Copyright ©2024 BMW of North America, Inc.
about:blank

1/7

5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

Check the tank for part number (P/N)
17 13 7 889 450 (1).
In this photo, the P/N is 17 13 8 090 271.

If the P/N is …7 889 450, check that there are no signs of coolant leaking from the tank. If there are no
signs of coolant leaking from the tank (e.g., seams leaking/split, no overspill from refilling/loose cap), no
further action is necessary. Reinstall the tank. Continue to Step 2.
If any other P/N is observed such as in the photo above, replace the tank per the Repair Instruction
17 11 100 Removing and installing/replacing coolant expansion tank. Continue to Step 2.
2. Check fuel injectors on cylinders 5 – 8 for any signs of coolant contamination (may require the use of a

borescope). Replace any injectors (up to 4) with signs of coolant contamination.

Coolant contamination on a fuel injector (1).

PARTS INFORMATION
Use and invoice the part numbers below that apply at the applicable quantity.
Part Number
17 13 7 889 450
13 64 7 852 362

Description
Expansion tank
Fuel injector

Quantity
1
Up to 4

Sublet – Bulk Supply Materials
Part Number
82 14 1 467 704

Description
Antifreeze (F90 up to 7/31/2018 production) (1 gallon
concentrate) (up to 3.5 liters for repair)

Quantity
Sublet up to
1/2 Gallon

HT-12 Coolant (All models from 8/1/2018 production)
(1 gallon
concentrate)
to 3.5
repair) Inc.
Copyright
©2024(up
BMW
ofliters
NorthforAmerica,

Sublet up to
1/2 Gallon

Or:
83 19 2 468 442
about:blank

2/7

5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

Or:
83 19 5 A32 851

HT-12 Antifreeze RTU (All models from 8/1/2018
production) (Bulk 1/10 Liter, Pre-mix) (up to 3.5 liters for
repair)

Sublet up to 35
one-tenth units

Additionally, other materials and small parts that are not specified above, such as fluids, lubricants, one-time
use screws, nuts, and seals, which must be replaced or installed (according to the ISTA repair
instructions/ETK/AIR), are to be selected from the Electronic Parts Catalog, and/or other approved BMW
Group resources according to the respective vehicle type. Invoiced these items separately under the Repair
Code listed in this bulletin.

CLAIM INFORMATION
Reimbursement for this action will be via normal claim entry utilizing the applicable work package and
additional work information below, and the part numbers above at the quantities that apply.
Plusposition (+)
Main work

The vehicle is already in the workshop
The vehicle arrives at your workshop and this Action shows open, no other
Main work will be performed/claimed during this workshop visit

Only one Main work flat rate labor operation code can be claimed per workshop visit.
Repair
Code:

0017220200

F9x S63M Replace coolant expansion tank

Below are the special flat rate labor operation code choices for this action.
No Expansion Tank and/or Injector Replacement is Necessary
Work Pkg
#1

Labor Operation Description

Labor Allowance

00 76 521

Check coolant expansion tank part number
and check for coolant residue on the fuel
As applicable
injectors of cylinders 5 – 8 (No repair is
necessary) (Plusposition)

00 76 018

Check coolant expansion tank part number
and check for coolant residue on the fuel
As applicable
injectors of cylinders 5 – 8 (No repair is
necessary) (Main work)

Or:
#2

Check PN and Replace Coolant Expansion Tank (No Injector Replacement Required)
Work Pkg

#3

Labor Operation Description

Labor Allowance

00 76 511

Check P/N / replace coolant expansion
tank and check for coolant residues on the
fuel injectors of cylinders 5 – 8 (No
As applicable
injector replacement is necessary)
(Plusposition)

00 76 011

Check P/N / replace coolant expansion
tank and check for coolant residues on the
fuel injectors of cylinders 5 – 8 (No
As applicable
injector replacement is necessary)
(Main work)

Or:

#4

Copyright ©2024 BMW of North America, Inc.
about:blank

3/7

5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

Check PN, Replace Coolant Expansion Tank and Replace One or More Injectors (Cyl 5 - 8)
Work Pkg

Labor Operation Description

Labor Allowance

00 76 512

Check P/N / replace coolant expansion
tank and check for coolant residues on the
As applicable
fuel injectors of cylinders 5 – 8, replace
one (1) injector (Plusposition)

# 4A1

00 76 012

Check P/N / replace coolant expansion
tank and check for coolant residues on the
As applicable
fuel injectors of cylinders 5 – 8, replace
one (1) injector (Main work)

And

If applicable:

A2

00 76 513

And again

If applicable:

A3

00 76 513

And again

If applicable:

A4

00 76 513

# 3A1
Or:

Replacing an additional injector (two
injectors total) (together with 00 76 512 or 2 FRU
00 76 012)
Replacing an additional injector (three
injectors total) (together with 00 76 512 or 2 FRU
00 76 012)
Replacing an additional injector (four
injectors total) (together with 00 76 512 or 2 FRU
00 76 012)

Check Coolant Expansion Tank PN and Replace One or More Injectors (Cyl 5 - 8)
Work Pkg

Labor Operation Description

Labor Allowance

00 76 525

Check coolant expansion tank part
number, check for coolant residues on the
fuel injectors of cylinders 5 – 8, replace
one (1) injector (Plusposition)

As applicable

# 6B1

00 76 021

Check coolant expansion tank part
number, check for coolant residues on the
fuel injectors of cylinders 5 – 8, replace
one (1) injector (Main work)

As applicable

And

If applicable:

# 5B1
Or:

B2

00 76 513

And again

If applicable:

B3

00 76 513

And again

If applicable:

B4

00 76 513

about:blank

Replacing an additional injector (two
injectors total) (together with 00 76 512 or 2 FRU
00 76 012)
Replacing an additional injector (three
injectors total) (together with 00 76 512 or 2 FRU
00 76 012)
Replacing an additional injector (four
injectors total) (together with 00 76 512 or 2 FRU
00 76 ©2024
012) BMW of North America, Inc.
Copyright
4/7

5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

Or the:
Expansion Tank was Replaced through another Repair or Technical Campaign
Work Pkg

Labor Operation Description

#7

00 76 514

Vehicle was already taken care of through
another repair or Technical Campaign
(Plusposition)

Labor Allowance
1 FRU

Or:
#8

00 76 013

Vehicle was already taken care of through
1 FRU
another repair or Technical Campaign (Main
work)

Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes and the claim
comments (For example: B WP 3A1, A4), unless otherwise required by State law.
Work Package # 7 and # 8: Please provide the date and mileage the prior repair was performed (Include the RO/BMW
Claim number when applicable).

Sublet – Bulk Supply Materials (RO and Claim Comments Required)
Sublet Code 4

Reimbursement for the supported amount repair-related bulk
supply material (Do not use the BMW part number for claim
submission)

Up to $30.00

Sublet reimbursement calculation for claiming the applicable repair-related bulk supply material (BMW part
numbers) is at the dealer net price amount for the full or proportional quantity used plus your center’s
handling.
BMW Antifreeze/Coolant: Claim the corresponding sublet dollar amount for the quantity needed to replace
what was drained. The one-gallon concentrate part number quantity for a 50/50 coolant/water solution.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Alternative Mobility Solution (AMS) for Vehicle Owners (RO and Claim Comments Required)
This Action qualifies for Alternative Mobility Solution (AMS) expense reimbursement, claim this item under
the Repair Code in this bulletin as follows:
Sublet Code 2 - Itemize the claimed AMS sublet amount on the repair order and in the claim comment section.

Please refer to SI B01 29 16 for additional information.
BMW Group’s AIR Application Resource for Flat Rate Labor Operation Codes
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW Group AIR application
resource, start by entering the the Chassis Number (last seven (7) characters of the VIN), and click on the
“Search” icon. If the “Vehicle Selection” window displays two or more model possible vehicle choices, select
the applicable Model, or enter the full VIN (17 characters) instead to proceed. Click on the “Flat Rate Units”
button and enter a flat rate labor operation code number “without spaces” in the field to the right, click on the
“Search” icon to display the corresponding listing of “Flat rate unit group details” that are available and their
corresponding FRU allowances.

Copyright ©2024 BMW of North America, Inc.
about:blank

5/7

5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback

To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department

Copyright ©2024 BMW of North America, Inc.
about:blank

6/7

5/19/24, 6:06 AM

17 03 24_DELIVERY STOP REPLACE THE COOLANT EXPANSION TANK

Copyright ©2024 BMW of North America, Inc.
about:blank

7/7