Technical Service Bulletin
01 MIL on - DTC P060C00 is stored in the ECM
01 24 19 2072046/4 April 18, 2024. Supersedes Technical Service Bulletin Group 01 number 23-05 dated
December 15, 2023 for reasons listed below.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

Q7, and Q8

2023 - 2024

All

3.0L engine

Condition
REVISION HISTORY
Revision

Date

Purpose

4

-

Revised Warranty (Updated Labor Operation)

3

12/15/2023

Revised header (Added Model Year)

2

11/22/2023

Revised header (Updated Engine code)

Customer states:
The MIL is illuminated.
Workshop findings:
The following DTC is stored in the engine control module ECM, -J623- (address word 0001):
• DTC P060C00 (Internal Control Module Main Processor Performance) with symptom code 30924.

Technical Background
This is a rare occurrence caused by the sensitivity of diagnostics software in the ECM, -J623- (address word
0001).

Production Solution
New software in the ECM -J623- (address word 0001) addresses the condition.

Service
This TSB replaces Pending Service Solution (PSS) TSB 2067767 MIL / EPC light on, various warnings or poor
performance - P060C00 stored in ECM - V6 TFSI for MY22 and MY23 Q7 and Q8 models.
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
© 2024 Audi of America, Inc.
Internal

Page 1 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Model

Old Software
Part Number

Old Software
Version

New Software
Part Number

New Software
Version

(or higher)

(or higher)

MY22 Q7

4M0907559Q

0001

4M0907559Q

0002

MY22 Q8

4M8907559Q

0001

4M8907559Q

0002

MY23 Q7

4M0907559T

0001

4M0907559T

0002

MY23 Q8

4M8907559R

0001

4M8907559R

0002

SVM Code
Input

01A255

Warranty
Claim Type:

• 110 Up to 48 Months/50,000 Miles
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.

Service Number:

2470

Damage Code:

0039

Labor Operations:

Software Update

0151 0060

Time stated on
diagnostic protocol
(Max 60 TU)

Diagnostic Time:

Claim Comment:

Software Update

0151 0010

See SRT with
associated
operations

Road test prior to the service procedure

No allowance

0 TU

Road test after the service procedure

No allowance

0 TU

As per TSB 2072046/4

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.

Required Parts and Tools
© 2024 Audi of America, Inc.
Internal

Page 2 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Tool Number

Tool Description

VAS 6160/VAS 6150

VAS tester with the current version of ODIS (Windows 10)

Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2072046) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.

© 2024 Audi of America, Inc.
Internal

Page 3 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.