Storage Areas
Load Limits
CAUTION: Never load more than 440 lbs (200 kg) in the powered frunk. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's GVWR and GAWR ratings (see Vehicle Loading
on page 274). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and
cargo, and the GAWR is the maximum allowable total mass permitted on an axle.

Interior Emergency Release

An illuminated interior release button inside the powered frunk allows a person locked inside to get out.
Press the interior release button to unlatch the powered frunk, then push up on the hood. If the powered frunk is
already open, pressing the interior release button closes it.
NOTE: The interior release button glows following a brief exposure to ambient light.
WARNING: People should never climb inside the powered frunk. Never shut the powered frunk when a person
is inside.
WARNING: Care should be taken to ensure that objects inside the powered frunk do not bump against the
release button, causing the hood to accidentally open.

Owner's Manual

78

Storage Areas
Cargo Bed
Overview
WARNING: Passengers must always be seated in seats with seat belts fastened at all times when the vehicle is
in motion. Never allow passengers or pets to ride in the cargo bed, even with the tonneau cover closed. Doing
so can result in serious injury or death.

1. Tonneau cover (Accessing the Cargo Bed on page 80)
2. LED light bars (Lights on page 111)
3. Tailgate and tonneau cover switches (Accessing the Cargo Bed on page 80)
4. Charge port manual release (Manually Releasing Charge Cable on page 225)
5. Power outlets (Cargo Bed Outlets on page 23)
6. Tailgate emergency release (Tailgate Emergency Release on page 82)
7. L-tracks (Securing Cargo on page 84)
8. Front tie-downs (Securing Cargo on page 84)
9. Attachment points (Securing Cargo on page 84)
10. Rear tie-downs (Securing Cargo on page 84)
11. Sealed storage (Under Bed Compartment on page 83)
For dimensions, weight capacities, and storage volumes of the cargo bed and its associated components, see
Dimensions, Weights, and Cargo Capacity on page 278.

79

Owner's Manual

Storage Areas
CAUTION: Although the tonneau cover protects contents from the majority of water during rain, snow, etc., it
does not make the cargo bed waterproof. Water ingress and/or condensation can occur. Therefore, do not
store items that can be damaged by water under the tonneau cover. Store water-sensitive items in the cab, the
Under Bed Compartment on page 83, or the Powered Frunk on page 76.
WARNING: Never fill, store, or transport volatile solvents, chemicals, or liquids anywhere in the cargo bed or
the under bed compartment. Doing so can cause spills, or allow fumes to accumulate, resulting in damage,
serious injury, or death.

Accessing the Cargo Bed
When Cybertruck is parked, use these exterior switches to access the cargo bed:

1. Tonneau Open - Fully press and release to fully open the tonneau cover. Press a second time to pause the cover.
To open the tonneau cover partially, press lightly and release the button when desired.
2. Tonneau Close - Fully press and release to fully close the tonneau cover. Press a second time to pause the cover.
To close the tonneau cover partially, press lightly and release when desired.
3. Tailgate Open - Press to release the tailgate latch. The tailgate drops but integrated struts prevent it from falling
forcefully.
NOTE: If the tonneau cover does not open or close when you fully press and release the tonneau open or tonneau
close button, respectively, you may need to calibrate the tonneau cover. For more information, see Troubleshooting
the Tonneau Cover on page 81. You can still press lightly to partially open or close the tonneau cover.
You can also use the mobile app and the touchscreen to open and close the tonneau cover. On the touchscreen,
touch Controls > Tonneau.
CAUTION: Do not drop anything onto the tonneau cover or place objects on top that could fall off. Avoid
allowing objects or debris to enter the tracks or interfere with the motors.
To close the tailgate, first remove all objects and ensure the hinge area is free of debris. Then lift the tailgate from
the bottom with both hands and press it firmly against the cargo bed to ensure it latches into position. Pull the
closed tailgate toward you to ensure it is fully latched into position. If the tailgate is open or unlatched, the
touchscreen displays a message.

Owner's Manual

80

Storage Areas

WARNING: When closing the tonneau cover, keep hands and objects away from the tonneau cover tracks.
Failure to do so can cause damage or injury.
WARNING: When closing the tailgate, keep hands and objects away from the perimeter, the hinges, etc. Failure
to do so can cause damage or serious injury.
Troubleshooting the Tonneau Cover
Draft comment: btrimboli
If you make any updates to this topic, make the same updates to the DIY Guide: #unique_189 on page
The tonneau cover does not open or close when:
• Cybertruck is locked, or is not in Park.
• There is an obstacle blocking the tonneau cover from closing. In this case, remove the object and try again.
WARNING: Although the tonneau cover is designed to stop moving if it detects an obstacle when closing,
do not rely on the tonneau cover to prevent damage or injury.
• Cybertruck has no low voltage power. In this case, it is necessary to open the powered frunk before attempting to
jump start Cybertruck. For more information, see If Vehicle Has No Power on page 285.
NOTE: The tonneau cover locks into place (whether opened or closed) when Walk-Away Door Lock is enabled.
Always double check that the tonneau cover is closed, or intentionally left open, before walking away from your
vehicle (see Walk-Away Door Lock on page 39 for more information). Car Left Open Notifications may not notify
you if the tonneau cover is left open.
If the tonneau cover does not open or close as expected:
1. Make sure that Cybertruck is unlocked and in Park.
2. Wait several minutes and then try again.
3. Inspect the tracks to ensure there's no debris or object in the way of the tonneau cover.

81

Owner's Manual

Storage Areas

4. Calibrate the tonneau cover:
◦ Touch Calibrate on the touchscreen (on the exterior view of the vehicle, where you would normally touch to
open or close the tonneau cover) and follow the onscreen instructions.
NOTE: The Calibrate option only appears on the touchscreen when the tonneau cover needs to be calibrated.
◦ Or, to calibrate the tonneau cover manually: Press and hold the Open button (1) until the cover is fully open
and wait for it to stall. Then, press and hold the Close button (2) until the cover is fully closed and stalled.

If the tonneau cover still does not function as expected, schedule a Service appointment.

Tailgate Emergency Release
An interior release, located on the inside of the tailgate, allows a person trapped in the cargo bed to open the
tailgate when Cybertruck is parked.

Owner's Manual

82

Storage Areas

To use the emergency release, flip the cover upward to access the pull strap, then pull the strap firmly toward you.
WARNING: People should never be inside the cargo bed when the Cybertruck is moving. Never shut the
tailgate when a person is inside.

Under Bed Compartment
The cargo bed features a sealed storage compartment. To open:
1. Open the tailgate (see Accessing the Cargo Bed on page 80).
2. Grasp the handle and flip the cover fully upward.

Once open, integrated struts hold the cover in the raised position.
The under bed compartment features a drain plug that allows you to use it to store water and/or ice. To open the
drain plug, simply turn it counter-clockwise and pull it up. Remember to re-install the drain plug once the
compartment is fully drained.
To close the under bed compartment, push it fully downward until the latch engages.
CAUTION: Take care when closing the lid to the under bed storage compartment. Slamming the lid shut may
cause damage or injury.

83

Owner's Manual

Storage Areas
CAUTION: Do not load more than 220 lb (100 kg) in the under bed compartment. Doing so can cause damage.

Securing Cargo
Cybertruck features multiple options that make it easy to secure cargo:
• Two integrated L-track rails, running lengthwise along the top of each side of the cargo bed are compatible with
standard fittings (not included) and provide multiple anchoring options.

• Four tie-down anchors - one at each bottom corner of the cargo bed.
CAUTION: Do not use the tie-down anchors or L-tracks for towing. They are intended to secure cargo such
as a spare tire. See Towing a Trailer on page 135 for more information.
CAUTION: The maximum force between any two anchor points must not exceed 707 lb (320 kg). Doing so
may cause damage.

• Eight attachment anchor points, four distributed on each side above the cab and on the rails of the cargo bed.
These anchor points are designed to accommodate accessory racks. To access the anchor points, press down on
the inboard side of the covers to pivot them to their open position. To close the covers, carefully pull the cover
down towards the outboard side of the vehicle until they are flush with the vehicle trim.

Owner's Manual

84

Storage Areas

WARNING: Before driving while carrying objects in the cargo bed, always ensure the cargo is evenly
distributed and adequately secured to prevent it from shifting or falling onto a roadway. Failure to do so can
compromise vehicle stability, damage the cargo bed, and cause serious personal injury or death to passengers
and other road users.

85

Owner's Manual

Connectivity
Mobile App
The Tesla mobile app allows you to communicate with Cybertruck remotely using your iPhone® or Android™ phone.
NOTE: The information below may not represent an exhaustive list of the functions available on the Tesla mobile app.
To ensure access to new and improved features, download updated versions of the mobile app as they become
available.

To Use the Mobile App
To set up the Tesla mobile app to communicate with your Cybertruck:
1. Download the Tesla mobile app to your phone.
2. Log in to the Tesla mobile app by entering your Tesla account credentials.
Your phone and vehicle must both be actively connected to cellular service or Wi-Fi for the mobile app to
communicate with your vehicle. Tesla recommends that you always have a functional physical key readily available if
parking in an area with limited or absent cellular service, such as an indoor parking garage.
NOTE: In the event that you require lockout assistance from Tesla due to a non-warranty issue, such as having limited
cellular connectivity and having no secondary key available, your expenses are not covered under the Roadside
Assistance policy.
NOTE: Tesla does not support the use of third party applications to contact Cybertruck.

Overview
When both your phone and the vehicle have internet service, the Tesla mobile app's home screen allows you to:
• Lock or unlock your vehicle.
• Enable or disable the heating or air conditioning and monitor the cabin climate.
• Check your vehicle's charging information. Charging details also appear when a charging cable is plugged in.
• Open or close the charge port.
NOTE: Twisting red lines next to the Battery icon indicate that the Battery is actively heating up (including while
charging or preparing to charge).
• Open the tailgate.
• See where your vehicle is located.
• View your vehicle’s estimated range.
• View your vehicle’s odometer, VIN, and current software version.
You can configure the shortcut options on the home screen to include opening and closing the powered frunk and
tonneau cover.
Media settings appear on the mobile app to pause, play, rewind, fast forward, and adjust the volume of the media
currently playing in the vehicle. You may need to enable Media settings by touching Audio Settings > Options >
Allow Mobile Control.
For supported video sources, send videos to Tesla Theater by sharing the link through the mobile app. Navigate to
the movie, show, or video you want to play on your phone and touch the share button. Share the video with the Tesla
app and it appears on the touchscreen if Cybertruck is in Park.

Profile
In the Profile tab located at the top corner, you can:
• Switch to a different vehicle associated with your Tesla account, if you have access to more than one.

Owner's Manual

86

Connectivity
• Navigate the Tesla Shop.
• Manage your account information and view your order history.
• View and customize notifications you receive under the Settings tab, such as Calendar sync, when your security
alarm has been triggered, charging updates, and new software updates. You can start updates from afar and
check its progress.

Controls
The Controls tab allows you to do the following:
• Open or close the tonneau cover.
• Open the tailgate.
• Open or close the powered frunk.
• Turn on and check the status of the A/C power outlets.
• Control the bed lights.
• Lock or unlock Cybertruck from afar.
NOTE: Your vehicle does not automatically re-lock if you unlock from the mobile app.
• Open or close the charge port.
• Flash the lights or honk the horn to find where Cybertruck is parked.
• Enable Keyless Driving.
NOTE: Keyless Driving can be used when you do not have your key or to bypass PIN to Drive in cases where you
forgot your PIN or your touchscreen is unresponsive (see PIN to Drive on page 184).
• Vent the windows.

Climate
You can check the interior temperature and heat or cool the cabin before driving (even if it’s in a garage), control the
seat heaters, and defrost the windshield:
• Enable or disable Defrost Truck, which helps melt snow, ice, and frost on the windshield, windows, and mirrors, by
swiping up from the bottom of the screen.
• Enable or disable Dog Mode or Camp Mode.
• Enable Cabin Overheat Protection, which prevents the cabin from getting too warm in hot ambient conditions.
You can choose whether you want the A/C to run when the temperature in the cabin exceeds 105° F (40° C) or
the selected temperature (if available). See Operating Climate Controls on page 192.
• Vent or close the windows.
• Precondition the cabin to your desired temperature and turn on or off the steering wheel and seat heaters.
Using the mobile app to precondition Cybertruck also warms the Battery as needed. The mobile app will notify you
once your vehicle has reached the desired preconditioning temperature.
NOTE: In extremely cold weather or icy conditions, it is possible that your charge port latch may freeze in place. In
cases where you cannot remove or insert the charge cable, or the vehicle is not Supercharging due to the latch
being frozen in place, use your Tesla mobile app to enable Defrost Truck for approximately 30-45 minutes. This can
help thaw ice on the charge port latch so the charge cable can be removed or inserted.

Location
Locate Cybertruck with directions, or track its movement across a map.

Summon
You can park or retrieve Cybertruck using Summon (see ) or Smart Summon (see ).
87

Owner's Manual

Connectivity
Schedule
Enable scheduled charging or departure, and precondition the vehicle. See Schedule at this Location on page 224
for more information. Scheduled charging or departure can also be saved based on a preferred location.

Security
The Security tab allows you to do the following:
• Enable or disable Sentry Mode (see How to Use Sentry Mode (With a USB Flash Drive) on page 188).
• Enable or disable Valet Mode (see Valet Mode on page 131).
• Enable or disable Speed Limit Mode and receive notifications when the vehicle's driving speed is within
approximately 3 mph (5 km/h) of your selected maximum speed (see Speed Limit Mode on page 184).
• Disable Phone Key, if needed (such as when you do not want the vehicle to automatically unlock whenever your
phone is nearby).

Upgrades
View and purchase the latest upgrades available for your vehicle, such as full self-driving.

Service
See Schedule Service on page 235 for information on how to schedule service through the mobile app.

Roadside
View roadside resources and request roadside assistance (where applicable). For more information on Roadside
Assistance, see Contacting Tesla Roadside Assistance on page 289.

Granting Access to a Second Driver
Add and remove access permission for an additional driver from the Tesla mobile app.
To add an additional driver, in the Tesla mobile app from the vehicle home screen, go to Security > Add Driver and
follow the onscreen instructions.
NOTE: The additional driver has access to all app features except purchasing upgrades.
To remove access, use the mobile app and go to Security > Manage Drivers and follow the onscreen instructions.

Owner's Manual

88

Connectivity
Wi-Fi
Draft comment: btrimboli
If you make any changes to this section, update the DIY Guide: #unique_212 on page
Wi-Fi is available as a data connection method and is often faster than cellular data networks. Connecting to Wi-Fi is
especially useful in areas with limited or no cellular connectivity. To ensure fast, reliable delivery of software and map
updates, Tesla recommends leaving Cybertruck connected to a Wi-Fi network whenever possible (for example, when
parked at home).
To connect to a Wi-Fi network:
1. Touch Controls > Wi-Fi. Cybertruck begins to scan and display detected Wi-Fi networks that are within range.
NOTE: If a known Wi-Fi network does not appear in the list, move Cybertruck closer to the access point or
consider using a range extender.
NOTE: When connecting to a 5GHz network (if available), check which channels are supported in your region.
5GHz Network Channels Supported
36-48

52-64

100-140

149-165

✓

✓

✓

✓

2. Find and tap the the Wi-Fi network you want to use in Searching for Wi-Fi Networks or add it manually in Add
Wi-Fi Networks, enter the password (if necessary), then touch Confirm. When successfully connected, the Wi-Fi
network shows in Known Wi-Fi Networks along with a green check. Whenever the network is within range,
Cybertruck connects to it automatically.
NOTE: Cybertruck does not currently support connections to captive Wi-Fi networks (a captive Wi-Fi, commonly
used by public hotspots, requires you to access a custom web portal and agree to terms of service prior to
allowing you to log in).
NOTE: If more than one previously connected network is within range, Cybertruck connects to the one most recently
used.
NOTE: At Tesla Service Centers, Cybertruck automatically connects to the Tesla Service Wi-Fi network.

Hotspots
Instead of a Wi-Fi network, you can also use a mobile hotspot (subject to fees and restrictions of your carrier). After
connecting to your hotspot, select Remain Connected in Drive, if you want to keep the connection active while you
are driving.

89

Owner's Manual

Connectivity
Bluetooth
Bluetooth® Compatibility
You can use various Bluetooth devices in Cybertruck provided it is paired and within operating range.
For example, you can pair your Bluetooth-capable phone so you can use it hands-free. In addition to
phones, you can pair other Bluetooth-enabled devices with Cybertruck. For example, you can pair an
iPod Touch, iPad, Android tablet, etc. from which you can play music.

Before using your phone or other Bluetooth device with Cybertruck, you must pair it. Pairing sets up Cybertruck to
communicate with supported Bluetooth-capable devices. You can pair up to ten Bluetooth phones. Unless you've
specified a specific phone as a Priority Device, or if the phone specified as Priority Device is not within range,
Cybertruck always connects to the last phone that was used (provided it is within range). To connect to a different
phone, see Switching Between Paired Devices on page 91.
NOTE: Authenticating your phone to use as a key (see Keys on page 33) does not allow you to use the phone handsfree, play media from it, etc. You must also pair it as described below.
NOTE: On many phones, Bluetooth turns off if the phone’s battery is low.
NOTE: Although Bluetooth typically supports wireless communication over distances of up to approximately 30 feet
(nine meters), performance can vary based on the phone, or other device, you are using.
NOTE: Cybertruck can pair up to twenty Bluetooth devices at a time but only allows two devices to connect
simultaneously (such as one phone and one controller or two controllers) to each front and rear touchscreen (if
equipped).
CAUTION: Do not leave your paired phone in your vehicle (for example, if you are hiking or at the beach). If
you must leave your phone in the vehicle, disable Bluetooth and/or turn the phone off.

Pairing a Phone or Bluetooth Device
Draft comment: btrimboli
If you make any changes to this topic, make the same changes in the DIY Guide: #unique_217 on page
Pairing allows you to use your Bluetooth-capable phone hands-free to make and receive phone calls, access your
contact list, recent calls, etc. It also allows you to play media files from your phone. Once a phone is paired,
Cybertruck can connect to it whenever the phone is within range.
1. To pair a phone or a Bluetooth device, sit inside Cybertruck and ensure the touchscreen is on.
2. Unlock your phone and enable Bluetooth (typically in Settings on your phone).
NOTE: On some phones, this may require you to go to Bluetooth Settings for the remainder of the procedure.
3. On the touchscreen, touch Controls > Bluetooth > Nearby Devices > Start Search to start Bluetooth scanning,
unless it has already started (indicated by a spinner).
4. Wait for your phone to be listed and touch Connect.
5. Check that the number displayed on your phone matches the number on the touchscreen. Then, on your phone,
confirm that you want to pair.
6. If prompted on your phone, specify whether you want to allow Cybertruck to access your personal information,
such as calendar, contacts and media files (see Importing Contacts and Recent Calls on page 91). When paired,
Cybertruck lists your phone under Controls > Bluetooth > Paired Devices.
To change the settings of a paired device, go to Controls > Bluetooth > Paired Devices and expand the dropdown
next to the device's name.
If you are experiencing issues importing or connecting to Bluetooth, see Troubleshooting Bluetooth on page 91 for
more information.

Owner's Manual

90

Connectivity
Importing Contacts and Recent Calls
Once a phone is paired, go to Controls > Bluetooth > Paired Devices and expand the dropdown next to the device's
name to specify whether you want to allow access to your phone’s contacts, recent calls and text messages. If you
allow access, you can use the phone app to make calls and send messages to people in your list of contacts and on
your recent calls list (see Phone, Calendar, and Web Conferencing on page 93). Before contacts can be imported,
you may need to either set your phone to allow syncing, or respond to a popup on your phone to confirm that you
want to sync contacts. This varies depending on the type of phone you are using. For details, refer to the
documentation provided with your phone.
If you are having trouble importing contacts or pairing with Bluetooth, see Troubleshooting Bluetooth on page 91 for
more information.

Disconnecting or Unpairing a Bluetooth Device
If you want to disconnect your phone or Bluetooth device, but keep it paired, touch Disconnect in your phone's
Bluetooth settings dropdown on the touchscreen (Controls > Bluetooth > Paired Devices > Your phone). If you no
longer want to use your device with Cybertruck, touch Forget Device and follow the instructions. Once you forget a
device, you must pair it again if you want to use it with Cybertruck (see Pairing a Phone or Bluetooth Device on page
90).
NOTE: Your phone automatically disconnects when you leave Cybertruck.
NOTE: Unpairing the phone has no effect on using the phone as a key. To forget an authenticated phone, see
Managing Keys on page 35.

Switching Between Paired Devices
Cybertruck automatically connects to a phone that you designated as Priority Device. If you have not set a phone as
a priority, Cybertruck connects to the last phone to which is was connected, provided it is within operating range
and has Bluetooth turned on. If the last phone is not within range, it attempts to connect with the next phone that it
has been paired with.
To connect to a different phone, touch Controls > Bluetooth > Paired Devices. Select the phone you want to connect
to, then touch Connect. If the phone you want to connect to is not listed, you must pair the phone. See Pairing a
Phone or Bluetooth Device on page 90.
When connected, the Bluetooth settings screen displays the Bluetooth symbol next to the phone's name to show
that Cybertruck is connected to the phone.

Troubleshooting Bluetooth
Your vehicle uses Bluetooth and BLE (Bluetooth Low Energy) to seamlessly connect your smartphone to Cybertruck.
Due to several potential factors, Bluetooth or BLE may sometimes disconnect or experience issues in the pairing
process. Connecting to Bluetooth allows your vehicle to use phone functions such as audio, phone calls, calendars,
text messages, etc.
BLE is used for passive functions like phone key.
NOTE: Do not unpair your vehicle to your phone or remove it as phone key without a working key card nearby.
Try the following to troubleshoot Bluetooth, starting with your smartphone.
Smartphone Troubleshooting
Bluetooth may not connect due to settings and updates on your smartphone:
• Enable Bluetooth on your phone. If already enabled, disable and re-enable Bluetooth again.
• Ensure Airplane Mode is turned off.
• Charge your phone; if your phone battery is too low, it may not support Bluetooth functions.
• Pair your device properly. If already paired, try unpairing and re-pairing again.
• Update your phone to the latest software provided by the manufacturer.
91

Owner's Manual

Connectivity
• Check that your vehicle's sound system is selected as the audio output source.
• Ensure your phone's settings allow for Bluetooth (ex: data is turned on or you are connected to Wi-Fi).
• Turn your phone off and on again.
• Ensure location permissions set to “Always On” for the mobile app.
Tesla Mobile App Troubleshooting
Check the Tesla mobile app:
• Confirm the Tesla mobile app is up to date on software.
• Verify you're logged into the Tesla mobile app while using your phone key.
• Ensure the Tesla app is running in the background.
• Double check that you have completely set up your profile in the mobile app and properly configured your
settings.
Vehicle Troubleshooting
Your vehicle's settings may affect its ability to pair with your smartphone:
• Charge Cybertruck: If the vehicle Battery is too low, you may lose Bluetooth function.
• Update vehicle software and make sure it is always up to date. Check for new software updates by navigating to
Controls > Software.
• Reboot your vehicle.
If Bluetooth still does not work, unpair from your vehicle AND smartphone. Then try re-pairing both again.
For BLE phone key issues, when in the vehicle, navigate to Controls > Locks and remove your phone as "Phone as
Key". Then set it back up again. But only do this while you are in the vehicle and have a reliable back up key available
(such as a key card).

Owner's Manual

92

Connectivity
Phone, Calendar, and Web Conferencing
Using the Phone App
When your phone is connected to Cybertruck using Bluetooth (see Bluetooth on page 90), and you
have allowed access to information on your phone (see Importing Contacts and Recent Calls on page
91), you can use the phone app to display and make a hands-free call to anyone listed on your phone.

• Calls: Displays recent calls in chronological order with the most recent call listed first.
• Messages: Displays message in chronological order with the most recent message listed first. You can view, send,
and receive text messages. Instead of typing a text message, touch the microphone button on the right side of
the steering wheel to enter text using your voice.
WARNING: To minimize distraction and ensure the safety of occupants as well as other road users, do not
view or send text messages when the vehicle is in motion. Pay attention to road and traffic conditions at all
times when driving.
• Contacts: Contacts are listed in alphabetical order and can be sorted by first name or last name. You can also
choose a letter on the right side of the list to quickly scroll to the names that begin with the selected character.
When you touch a name on your contacts list, the contact's available number(s) displays on the right pane, along
with other available information (such as address). Touch the contact's number to make a call.
• Favorites: Displays the contacts from your phone that you have identified as Favorites.
• Calendar: Displays calendar entries from your phone (see Calendar on page 94). If an entry includes a phone
number or an address, you can make a phone call, or navigate to a destination, by touching the corresponding
information in the calendar entry.

Making a Phone Call
You can make a phone call by:
• Speaking a voice command (see Voice Commands on page 26). Voice commands are a convenient, hands-free
way to call or text your contacts.
• Touching a phone number shown in a list in the phone app - Contacts, Calls, or Calendar.
• Using the Cybertruck on-screen dialer in the Phone app.
NOTE: If it is safe and legal to do so, you can also initiate a call by dialing the number or selecting the contact
directly from your phone.
NOTE: You can also make a phone call by touching a pin on the map and choosing the phone number (if available)
on the popup screen.

Receiving a Phone Call
When your phone receives an incoming call, the touchscreen displays the caller’s number or name (if the caller is in
your phone’s contact list and Cybertruck has access to your contacts).
Touch one of the options on the touchscreen to Answer or Ignore the call. Depending on the phone you are using
and what speakers you used for your most recent call, your phone may prompt you to choose which speakers you
want to use for the incoming call.
WARNING: Stay focused on the road at all times while driving. Using or programming a phone while driving,
even with Bluetooth enabled, can result in serious injury or death.
WARNING: Follow all applicable laws regarding the use of phones while driving, including, but not limited to,
laws that prohibit texting and require hands-free operation at all times.

93

Owner's Manual

Connectivity
In Call Options
When a call is in progress, the call displays on the touchscreen. To adjust the call volume, roll the left scroll button
during a call. Tilt the left scroll button left to mute/unmute and tilt right to end the call.

Calendar
The calendar displays scheduled events from your phone’s (iPhone® or Android™) calendar for the
current and next day. The calendar is conveniently integrated with the phone app so you can dial into
your meeting from a Calendar entry. It is also integrated with the navigation system so you can
navigate to the event's location.

1. Ensure your phone is paired to Cybertruck.
2. Ensure you are logged into the Tesla mobile app.
3. In your Tesla mobile app, touch Profile > Settings > Calendar Sync.
NOTE: To ensure you have access to all of the calendar's features, it is recommended that you use the most
recent version of the mobile app.
4. On your phone, go to Settings and allow access/give permission to share your calendar with the Tesla mobile
app. The mobile app can then periodically (and automatically) send calendar data from your phone to
Cybertruck.
If a calendar event includes an address, a navigation arrow displays to indicate that you can touch the address to
navigate to the event's location.
If an event has a uniquely specified address and takes place within two hours of you entering your vehicle and
preparing to drive, Cybertruck automatically routes you to the event's address (see Automatic Navigation on page
204).
Touch an event's information icon to display all notes associated with the event. If the notes include one or more
phone numbers, the information icon shows a phone icon and the calendar displays the first phone number found.
Touch to initiate a phone call. You can also initiate a phone call by touching any number in an event's notes popup
screen (this is especially useful for conference calls). If notes include a web link, you can touch the link to open it in
the Web browser.

Zoom
Seamlessly take meetings and calls through your vehicle's touchscreen. To set up, touch the Zoom app
and sign in or enter the meeting ID. You can even access meetings shown on your calendar or in text
messages by touching the Zoom link. Your vehicle's cabin camera can be used in calls over Zoom only
when Cybertruck is Parked. When the vehicle is shifted out of Park in the middle of a Zoom call, the
cabin camera turns off and you switch to audio only. Use the touchscreen to turn on/off the video,
mute/unmute yourself, and customize various preferences for your meeting.
WARNING: Do not to use the video function when the vehicle is “temporarily parked” on a public road (such as
when the vehicle is parked along the curb or in a spot that is not a designated parking spot)..
WARNING: Stay focused on your surroundings and follow all applicable laws while driving, including, but not
limited to, laws that require hands-free operation at all times.

Owner's Manual

94