UPDATE PRIOR TO SALE NOTICE

Global Service Action
Number: H467 UPS0124-2

Changes are highlighted in blue

Subject:

Publication No.: H467
UPS0124-2

Powertrain Control Module (PCM) Printed Circuit Board
Incorrect Assembly

Model: XF (X260)
Model Year: 2024
Model: XE (X760)
Model Year: 2024
Model: F-PACE (X761)
Model Year: 2024
Date of Issue: 05 March
2024
Expiry Date: 05 March
2025

To:

All National Sales Companies (NSCs), importers, retailers and authorized repairers.

For the
Attention of:

The approved JLR retailer/authorized repairer.

Important:

Rest of World: Quarantine in retailer/authorized repairer or applicable NSC location.
North American Territories: Quarantine in retailer/authorized repairer or applicable NSC location.
NOTE: The information in this campaign is intended for use by professional technicians. If you are not a
JLR retailer/authorized repairer, do not assume that a condition described affects a specific vehicle.
Contact an authorized JLR retailer/authorized repairer to determine if this campaign applies to a specific
vehicle.
This campaign has been issued to provide the relevant repair instructions, parts and warranty information.
This campaign is valid for one year only. Repairs must be completed prior to the expiry date at the top of
this campaign.
This campaign does not apply to any vehicles already registered and in use, either with the
retailer/authorized repairer, or customer. Any vehicle already in use may continue to be driven and any
repair instructions will be communicated through a separate campaign.

FOR THE ATTENTION OF ALL:
DESCRIPTION OF ISSUE
A potential concern has been identified on specific vehicles within the above vehicle range.
On certain 2024 model year XE, XF and F-PACE vehicles equipped with Ingenium 2.0L Petrol engines, the Powertrain Control
Module (PCM) has been assembled to an incorrect specification. This can lead to electrical shorts inside the PCM.
ACTION TO BE TAKEN
This campaign directs retailers/authorized repairers to quarantine any unsold vehicles in the affected vehicle range.
Check the JLR Warranty Portal to make sure affected vehicles are correctly identified prior to starting this campaign. The Warranty
Portal will be updated to reflect only those vehicles affected.
Retailers/authorized repairers are reminded that they must not sell vehicles identified as affected by this campaign until such time as
the repair has been successfully completed.
Refer to the warranty section of this campaign for details of the Related Damage Process. At the time of confirming a booking for a
vehicle repair, make sure you check the Warranty Portal to confirm if there are any other outstanding campaigns, to make sure the
correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.
CUSTOMER COMMUNICATION
Should this campaign mean that you are unable to deliver an affected vehicle to a customer at an agreed handover date, advise the
customer of the following:

'JLR are committed to delivering vehicles to our customers of the highest quality, complete with the very latest hardware and
software. Our vehicles are continually evolving with our Engineering and Design teams constantly looking for new and innovative
ways to further enhance and develop our vehicles. JLR have advised us that there is an upgrade to be completed on your vehicle
and have instructed us to complete this action prior to handing the vehicle over to you. JLR apologize that this upgrade may delay
the delivery of your new vehicle but are committed to make sure customers benefit from the very latest technology to make sure your
ownership experience is the best possible.'
If necessary, you may communicate technical details of the repair or upgrade that is required on the vehicle, this is at your discretion.
RETAILER EMPOWERMENT
We appreciate the frustration experienced by both our customers and retailers with regards to the launch of any Update Prior to Sale
(UPS) notice.
Following the launch of Retailer Empowerment (and where you feel it appropriate), you now have the ability to offer goodwill to
customers who have suffered delays in the delivery of their vehicle. Any goodwill offer should be specifically for a customer whose
vehicle delivery has been delayed due to UPS activity to acknowledge the poor experience.
Should you have any questions, contact the Customer Relationship Center (CRC) in the first instance for help and support.
FOR THE ATTENTION OF NORTH AMERICAN TERRITORIES ONLY:
Visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your retailer/authorized repairer. Unsold vehicles
must be repaired prior to handover of the vehicle for retail sale.

Yours faithfully
Steve Oldham
Global Customer Care Quality Director

SERVICE INSTRUCTION - H467 UPS0124-2
Parts Information
The parts below should be ordered through JLR in the normal manner.
Description

Part Number Qty

Powertrain Control Module (PCM) T2H52220

1

SROs
Description

SRO

PCM - Renew

Time

18.30.01 0.5

PCM - Configure 85.18.03 0.2
Drive in/drive out 10.10.10 0.2

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to TOPIx to obtain the latest repair time.

Warranty Information
Warranty claims should be submitted quoting program code H467 with the relevant option code from the table below. As option codes are used there is
no requirement for you to enter SROs or parts, these are included for information only.
Program Code Option

Description

SRO

Time Part Number Qty

H467

A

PCM - Renew
18.30.01 0.5
PCM - Configure 85.18.03 0.2

T2H52220

1

H467

B

PCM - Renew
18.30.01 0.5
PCM - Configure 85.18.03 0.2
Drive in/drive out 10.10.10 0.2

T2H52220

1

NOTE:
The option that contains the drive in/drive out allowance may only be claimed when the vehicle has been brought back into the workshop for this
action alone to be undertaken.
Warranty claims should be submitted in accordance with the current JLR Global Warranty Manual, and its amendments, unless stated otherwise in this
bulletin.

Customer Reimbursement and Related Damage Process
NOTE:
If there is a requirement to claim for related/consequential damage or customer reimbursement, refer to the related instruction that can be found
in TOPIx (in the Search box, search for 'Related Damage Claim' and open the related bulletin link).

SERVICE INSTRUCTION
1. Renew the PCM (see TOPIx Workshop Manual section 303-14: Electronic
Engine Controls - Removal and Installation - Powertrain Control Module).
2. Connect the JLR approved diagnostic equipment and the JLR approved
battery support unit.

3.
NOTE:
Only complete this step if the vehicle is in transit mode.
Select the link to disable transit mode.
4.
NOTE:
Only complete this step if the vehicle is in transit mode.
Select the link to disable transit mode.
5. Configure the new PCM 6.
NOTE:
If required.
Select the link to enable transit mode.
7.
NOTE:
If required.
Select the link to enable transit mode.
8. Follow all on-screen instructions to complete the task.
9. Disconnect the JLR approved diagnostic equipment and the JLR approved
battery support unit.