S | Warranty Field Campaign

Campaign Number: c7014__| Revision: Released Date: 21-Mar-

Expiration Date (U.S. and
Canada): 01-Mar-2025

X15 CM2450 X142B Beta Calibration Campaign Expiration Date
(International): 01-Mar-
2025
Attention

¢ Worldwide distr./ branches and Div./Reg Offices
e U.S. / Canadian Dealers
e U.S. / Canadian Distr./Branches and Div. Offices (Automotive)

If additional information is required, please contact your Cummins Warranty Operations
Group Leader.

Description

Certain X15 CM2450 X142B Beta engines need to be upfit to production specifications. This field
action authorizes certified repair locations to update the ECM calibration to the production ECM
code, install a new turbocharger actuator, install a new dataplate, install a new EPA clean idle
sticker.

Action
In order to qualify for repair under this field action, an engine:

1. will be covered Regardless of coverage status, and
2. must show as OPEN on QuickServe® Online for this field action.

Note : The ESN list is attached for reference, and contains important information
needed to complete the upfit.

After verifying that the engine meets the above requirements, perform the following actions:

¢ 1. DATAPLATE REPLACEMENT:
e 1a. As required, to obtain a corrected data plate, please refer to Attachment B. The new
dataplate MUST be ordered through completing the steps on

http://replacementdataplate.cummins.com.

Note : Please refer to Attachment A. Unique information for your specific ESN to fill
in the request can be found in Attachment A.
1b. As required, remove the old engine data plate, clean the area with denatured alcohol or

other acceptable solvent, and install the new engine data plate. The new data plate must be
placed in the correct location with the same orientation as the original engine data plate.

Note : All removed engine data plates must be destroyed.

2. ECM CALIBRATION CODE UPDATE:

2a. Please refer to Attachment A. Identify the new base ECM calibration code as indicated in
Attachment A.

3. Install the new turbocharger actuator per procedure 10-134 in the appropriate service
manual.

4. Secure and apply an EPA Clean Idle Sticker Installation. Please refer to Attachment C for
detailed instructions for sticker installation.

Note : This part must be ordered and installed by a Cummins Distributor. Sublet
this service as needed. Reimbursements for sublet services MUST be filed to other
claimables.

5. As indicated above, please refer to Attachment A to confirm the correct ECM production
calibration appropriate for your specific ESN. If ECM already contains the most recent
calibration revision, DO NOT recalibrate the engine. No further action is needed. File a claim
for Admin and 17-902 Campaign Check to close the eligibility of the engine.

6. If a previous calibration revision is installed in the engine, download the latest calibration
available on QuickServe® Online. Use the calibration revision history date to identify the latest
calibration revision available. Please refer to Procedure 019-032 in the appropriate Service
Manual.

Note : Certified repair locations outside of California, who elect to perform this
campaign on engines installed in vehicles which are registered in the state of
California, are authorized to do so if they have the two items noted below in their
inventory. Please note that the Label, Authorized Change and the Proof of
Correction Form must be ordered through standard parts processes. They are not
available on QSOL.

7. lf applicable, a "Label Authorized Change," Cummins part number 5297400, must be filled
out and affixed to the engine. Clearly print or type "ECM Calibration Update" in the center box.
Fill in the Campaign Number, Distributor or Dealer Code, and Date information. Peel off the
backing material and install the label on the engine valve cover near the engine data plate.
There is a clear protective cover on this label; peel the backing off of this cover and push the
clear cover over the printed material. This will help protect the label during engine operation.
Label cost and appropriate SRT time can be claimed per Campaign guidelines.

8. If applicable, an "Emissions Campaign - Proof of Correction" form, Bulletin #4310621, must
be filled out and provided to the Customer. Inform the Customer to retain this certificate as
proof that the Emissions Campaign has been performed. This form may be required as proof

of an Emissions Campaign by the State of California, for vehicles registered in that state, the
next time the vehicle registration is renewed. Form cost and appropriate SRT time can be
claimed per the Campaign guidelines.

e 9. File one claim for the applicable listed parts and required labor to complete the repair. SRT
17-902 should ONLY be claimed if the unit DID NOT require an updated calibration.

Material Disposition

Where applicable, items removed should be returned to ReCon for core credit. Unless otherwise
indicated, items with no core liability can be scrapped.

Reimbursements

Parts

Note : All parts listed are OPTIONAL. Claim only the parts required to complete the
repair. The part numbers 4310621 and 5297400 are only required for use on engines
installed in vehicles registered in the state of California. They are OPTIONAL for all
other applications.

The following parts are covered under this field action:

Part Number Quantity Description

388639600 1 FLEET COUNT (OPTIONAL)

431062100 1 PROOF OF CORRECTION
FORM (OPTIONAL)
LABEL, AUTHORIZED

529740000 1 CHANGE (OPTIONAL)
OWNER'S MANUAL

638084100 1 (OPTIONAL)

647347600 1 KIT,ACT (OPTIONAL)
EPA CLEAN IDLE STICKER

477: 1
647736900 (OPTIONAL)

Note : SRTs to gain access that are required to complete the repair, that are sufficiently
explained in the claim narrative, may also be claimed on this action.

Note : All SRTs listed are OPTIONAL. Select only the SRTS required to complete the
upfit. For California registered vehicles ONLY, SRT 17-901 for up to .1 hours can be
claimed for completing the Label - Authorized Change and the Emissions Campaign -
Proof of Correction forms.

Labor Using Applicable Access Code and Time

SRT Code

Description

Time (hrs)

00-114

Dataplate, Engine - Remove
and Install

00-902

TECHNICIAN
ADMINISTRATIVE TIME -
ROAD/FIELD REPAIR
(OPTIONAL)

00-90F

Technician Administrative
Time - Field Action Service
Events

10-1 JF

Variable Geometry
Turbocharger Actuator,
Electric - Remove and Install -
X15 CM2450 X142B

17-901

Stamp Engine Data
Plate/Apply Emission Sticker

17-902

Campaign Check

19-0G5

Engine Control Module
Calibration Code - Transfer
(CMI)

Travel

Travel is covered under this field action. Towing is not covered under this field action.
Other Claimables

Consumables are covered under this field action.

Note : Additional parts, such as o-rings, gaskets and fasteners, that are required to

complete the repair, but not listed, may be claimed in Other Claimables. Please

consolidate all consumables and claim them as one line item in Other Claimables titled
CAMPAIGN SUPPLIES or other appropriate selections. Please include brief summaries
on the details of items claimed. A lack of documentation in the narrative may result in a

reduction in claim reimbursement or claim denial.

Claim Instructions

For Cummins Dealers, claims for this Field Campaign must be filed via RAPIDSERVE™ Web
(rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the
"Warranty" tab in QuickServe® Online. If there are additional questions, please contact your local

Cummins Distributor.