NHTSA ID Number: 10252382
Manufacturer Communication Number: TS35-FM-2401
TSB/Document Date: 2024-04-02
Summary
New Kibes RT Updated Software
SERVICE BULLETIN
Subject: New Kibes RT Updated Software and
Implementing Frewheeling Diodes for Mux-5B
Bullettin
Bulletin Type: Field Fix Mandatory
Bulletin No: TS35-FM-2401
PQR No: 500000007500
Rev No: 00
Ref. No: 700004478
Vehicle Model: TS35
Flat Rate Time / Code:120 min
Date of issue: 01.03.2024
Modify Before: 01.03.2025
What to do with off coming parts:
What to do with outstanding parts of previous
revision:
☐ Scrap
☐Return
☐Use with additional parts
☐On consignment
☒ No off coming parts
☐ Scrap
☐ Return
☐ Use with additional parts
☐ On consignment
Description of the modification:
This bullettin includes the updated RT Kibes
ZR5-A software. It will improve Multiplexing units’
performance. Also, additional improvements were
added to new Multiviu software.
Freewheeling diodes will be implemented to the
“Mux 1.1” and “Mux 2.1”.
Bulletin Responsible:
Bahadır Kaya (Software R&D)
Utku Devecioğlu (Hardware R&D)
Published & Approved By: Alper Tekniker
☒ No outstanding parts
SERVICE BULLETIN
SAFETY INSTRUCTIONS
1. Mechanical Requested Dress Code
WARNING:
➢ Dress properly to avoid personal injury and damage to the
vehicle
✓
✓
✓
✓
✓
Always wear protective clothing
Do not wear any worn or loose-fitting clothing
Remove jewelry before starting to work
In case of long hair, use hairnet
The illustration on the left shows some of the correct and
incorrect clothing
✓ Sharp edged items should be avoided in order not to
scratch vehicle (i.e. belts, watches, necklace)
2. Protect Seats when Mechanic Starts Working
✓ Seats, trimming, upholstery stuff and carpeting should be
protected with appropriate coverings.
3. Welding on the Chassis
a. Always disconnect the batteries (starting with the negative lead).
b. Disconnect the connectors of electrical and electronic equipment (electronic control units,
sensors and actuators) if they are less than 2 meters away from the chassis part to be
welded or the earth terminal of the welding equipment.
c. The earth terminal should never be attached to vehicle components such as engine, axles
and springs. Arcing on these parts is not permitted, because of the risk of damage to
bearings, springs, etc.
d. The earth terminal must make good contact and be placed as close as possible to the part to
be welded.
e. Plastic pipes, rubber parts and parabolic springs should be well protected against welding
spatter and temperatures higher than 70°.
f. The contact switch must not be in the accessory or contact position. The contact key should
be removed.
g. Reconnect in reversed order of disconnecting. Ensure that a good earth connection is made
between chassis, engine and cab.
SERVICE BULLETIN
INCLUDED PARTS LIST
Part No
9431-14Y
Part Name
Picture
DİYOT(10A05.DC(10A)
Qty
3
Unit of
Measure
Qty
The program Link
Kibes :
** TS02-LC3-005 software should be installed on vehicles with
software starting with
TS02-LC3-…
https://content.temsa.com/sapcs?get&pVersion=0045&contRep=ZADNSPEKTEP07101&docId=0050568F7
25E1EEEB5DDB7DAC19524B8&accessMode=r&compId=TS02-LC3-005.zip
Multiviu :
**TS02-MV-002 software should be installed on vehicles with software starting with
TS02-MV-…
https://content.temsa.com/sapcs?get&pVersion=0045&contRep=ZADNSPEKTEP07101&docId=0050568F7
25E1EEEABF57C06E0CF24B8&accessMode=r&compId=TS02_MV_002.L2P.zip
Important Note:
-The software mentioned above are up to date software. If there is previously published bullettin
for these vehicles, please refer to this bullettin and install these software.
- Please note option selections before installing Kibes software. If the options are reset, after
installing, reselect the same options.
SERVICE BULLETIN
Diode Implementation
1- Open the front relay panel.
2- Locate the MUX5-B 1.1 Which is numbered as 06A033.
3- Locate the connector numbered P06A033-B
4- To its 15th and 16th pins do the operation explained below.
1-Strip the cable from its 5 cm away from the connector side.
2- Connect the diode’s cathode pin to striped part of the cable.
3- Connect the diode’s anode pin to nearest ground cable.
SERVICE BULLETIN
5- Remove the back headlining which is at the back of the vehicle
6- Locate the MUX5-B 2.1 Which is numbered as 06A037.
7- Locate the connecter numbered as P06A037-C
8- To its 21st pin do the operation explained below.
1-Strip the cable from its 5 cm away from the connector side.
2- Connect the diode’s cathode pin to striped part of the cable.
3- Connect the diode’s anode pin to nearest ground cable.
SERVICE BULLETIN
Uploading the up to date program(Kibes):
1- Park the vehicle to an area which is proper to work.
2- To install the KIBES software, locate the KIBES socket next to the OBD socket by looking at the label
on the cover.
SERVICE BULLETIN
3- Connect one end of the KIBES cable to the CANanalyzer or Peak cable and the other end to the KIBES
diagnostic socket. Connect the CANanalyzer or Peak output to the computer. Make sure that the KIBES
dongle is inserted to your computer.
SERVICE BULLETIN
SERVICE BULLETIN
4- Install the KIBES software on the vehicle as described in the images. Turn the ignition switch on. Do not
start the engine.
SERVICE BULLETIN
Hint: The software version must be selected correctly. The number shown in the picture may be
representative.
SERVICE BULLETIN
SERVICE BULLETIN
4.1- Click "Preferences" to check the Baudrate and port. (for TS Coachs 250000)
SERVICE BULLETIN
4.2- Click on the instructions shown in order in the picture.
1.click here
2.click
here
3.click
here
4.3- If you get an error when you start loading of software, try CV flash download.
SERVICE BULLETIN
2.Then click here. Start arrow will be
green If the selected port is true.
1.click
here
SERVICE BULLETIN
Uploading the up to date program (Multiviu):
1- Park the vehicle to an area which is proper to work.
2- Connect your computer to the vehicle by using the CANalyzer interface. Plug the USB part into your
computer and connect your CAN cable to the 9 pinned OBD port with the D pin low and the C pin high.
D
C
SERVICE BULLETIN
3- Turn the ignition switch on. Do not start the engine.
4- Make sure that the KIBES dongle is inserted to your computer.
5- Select the “Open Project” selection and click “next”.
SERVICE BULLETIN
SERVICE BULLETIN
Make sure that
right program is
choosen.
SERVICE BULLETIN
6- Right click on Mulviu then click “Communication Settings” check the Port and Baudrate.
You can change port
here. Please make
sure correct port.
You can change
“Start Baudrate”
here
You can change
“Download
Baudrate” here
SERVICE BULLETIN
7- Then Right click on Mulviu, Download the logic side of the program.
SERVICE BULLETIN
8- Right click on Mulviu again then click “Archive Download”
SERVICE BULLETIN
9- You should find program in your workspace then double click the program.
SERVICE BULLETIN
SERVICE BULLETIN
10- Click on “MRT” then click “Open”.
Make sure you choose the right program here!
SERVICE BULLETIN
11- After the software is checked, click the “Build New Archive”, then click the “Archive Download”.
12- When a warning occurs, click OK, then wait for the program to be downloaded. Do not cut the
power off during the download process, this could cause the body controller to dysfunction.
SERVICE BULLETIN
VEHICLE LIST
No
Otpa No
Chassis No
Model Country
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20..
21.
22.
23.
24.
25.
26.
27.
OA15607
OA17110
OA17135
OA17148
OA17149
OA17180
OA17181
OA17200
OA17212
OA17266
OA17267
OA17268
OA17269
OA17353
OA17354
OA17355
OA17356
OA17357
OA17358
OA17457
OA17484
OA17575
OA17576
OA17577
OA17688
OA17689
OA17745
NLTRPPA76M1000606
NLTRPPA72R1000609
NLTRPPA79R1000610
NLTRPPA79R1000607
NLTRPPA70R1000608
NLTRPPA70R1000611
NLTRPPA72R1000612
NLTRPPA74R1000613
NLTRPPA76R1000614
NLTRPPA78R1000615
NLTRPPA7XR1000616
NLTRPPA71R1000617
NLTRPPA73R1000618
NLTRPPA75R1000619
NLTRPPA71R1000620
NLTRPPA73R1000621
NLTRPPA75R1000622
NLTRPPA77R1000623
NLTRPPA79R1000624
NLTRPPA70R1000625
NLTRPPA72R1000626
NLTRPPA74R1000627
NLTRPPA76R1000628
NLTRPPA78R1000629
NLTRPPA74R1000630
NLTRPPA76R1000631
NLTRPPA78R1000632
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
TS35
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
SERVICE BULLETIN
LABOR BREAKDOWN
Application
Time
Downloading ZR5 Kibes Program
5m
Downloading Multiviu Program
5m
Archive Downloading of Multiviu
40m
Implementing Diodes
70m
Total Labor Time
120m
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TS35-FM-2401
Replacement Service Bulletin Number:
MFR Communication Date: 2024-03-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: BACK OVER PREVENTION:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
Autoauth, OE-
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.