NHTSA ID Number: 10252379
Manufacturer Communication Number: SA-020-24
TSB/Document Date: 2024-04-02
Summary
CX-70 and CX-90 service cautions for new and revised features. The CX-70 and CX-90 have new and revised features that are different from previous models and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns.
C refrigerant gas containing A/C compressor oil and
fluorescent agent, or A/C compressor oil with
fluorescent agent.
• NEVER use A/C compressor oil with fluorescent
agent (dye).
Model
Part Number
Description
KRYP-61-K39 9U
POE Oil for
Electric
Compressor
H3T
0000-77-540E-20
Engine Oil Level Measurement (Infotainment Center
Display)
1. Make sure the hood is closed.
2. Start the engine.
3. Select “Information” on the Home screen to display the
vehicle status monitor.
4. Select “Vehicle Status Monitor”.
5. Select “Engine Oil Level”.
6. Select “Measure Engine Oil Level”.
7. Select "Start Measurement"
Page 14 of 50
03/25/2024 02:56 PM tlawrenc
Measurement of the engine oil level begins. Do not depress
the accelerator pedal during the measurement.
8. Oil Level Result is displayed
• Normal
• Low
• High
Page 15 of 50
03/25/2024 02:56 PM tlawrenc
FR-8EAT (PHEV and M Hybrid
Boost) Front Engine Rear
Drive-8 Electrical Automatic Transmission)
FR-8EAT (No torque Converter) Unit to be installed in this
model, which is including a Motor in cases of PHEV & M
Hybrid Boost models.
Always make sure to only use ATF-A7, which is marked on
the Filler Plug. If the new FR-8EAT or the motor drive unit
needs to be replaced, the transmission including the motor
drive will need to be replaced as an assembly. The Oil Pan is
made from Resin which needs to be cared for to avoid
breakage. Never set the transmission on the oil pan or ATF
cooler, Damage could occur. Use support blocks as shown in
WSM.
Also, always make sure to use a nozzle tube (about 8mm
less than 10mm inner diameter of Overflow tube) and the
service mode to fill ATF-A7 into FR-8EAT through the Filler
Plug with the correct volume.
1. Transmission Case
2. Motor Housing
3. Bearing Cover Component
Page 16 of 50
03/25/2024 02:56 PM tlawrenc
Transfer Case for All-Wheel Drive
Transfer Case (A) to be installed in the All-Wheel
Drive model.
Always make sure to use ATF-A7 (Not to use SG1), which is
marked on the case near the Filler Bolt (B), to improve fuel
economy.
Owner's Manual -> Driving -> i-stop
i-stop (M Hybrid Boost Inline 6 cylinder)
i-stop is a function that automatically stops and restarts the
engine to improve fuel economy, reduce exhaust emissions,
and idling noise.
Stopping the Operation of the i-stop Function
The i-stop function stops and the i-stop OFF switch indicator
light turns on.
NOTE When the i-stop function is stopped and the engine is
stopped, the i-stop function becomes operational again the
next time the engine is started.
Indicator Light
Green
The i-stop indicator light (green) notifies the driver that the
engine is stopped by i-stop control.
Amber Flashing
If the i-stop control inhibits i-stop operation, the i-stop
warning light (amber) flashes to inform the driver.
• DTC stored
Amber Solid
NOTE
• If the engine is stopped with the i-stop function
stopped, the i-stop function becomes operational again
when the engine is started the next time.
• LN3 Battery for vehicles equipped with i-stop.
• Battery disconnect/reconnect - Perform the battery
If the i-stop control inhibits i-stop operation, the i-stop
warning light (amber) turns ON solid to inform the driver.
• Ignition switched ON (check of i-stop control system)
• Engine stalls due to driver's operation while engine
is stopped by i-stop control
Page 17 of 50
03/25/2024 02:56 PM tlawrenc
condition initial setting (i-stop setting). Go to MGSS
BATTERY CONDITION INITIALIZATION SETTING (istop SETTING)
12V Batttery Charging / Testing
• Communication error to PCM and instrument cluster
MGSS -> 01-007/23
i-ACTIVSENSE
Owner's Manual -> Driving -> i-ACTIVSENSE
i-ACTIVSENSE Indicators
1. Forward Sensing System Operation State
Owner's Manual -> Driving -> i-ACTIVSENSE
Status Symbol
• Distance & Speed Alert (DSA)
• Smart Brake Support (SBS) [forward sensing function]
• Smart Brake Support (SBS) [collision avoiding assist
system during turning]
2. Forward Side Sensing System Operation State
Page 18 of 50
03/25/2024 02:56 PM tlawrenc
• Front Cross Traffic Alert (FCTA) (if equipped)
3. Lateral Side Sensing System Operation State
• Lane Departure Warning System (LDWS)
• Lane-Keep Assist System (LAS)
• Emergency Lane Keeping [road keep assist] (ELK)
4. Rear Side Sensing System Operation State
•
•
•
•
Blind Spot Monitoring (BSM)
Rear Cross Traffic Alert (RCTA) System
Smart Brake Support [Rear Crossing] (SBS-RC)
Emergency Lane Keeping [blind spot assist]
5. Rear Sensing System Operation State
• Smart Brake Support (SBS) [rear side sensing
function] (if equipped)
Smart Brake Support (SBS)
Owner's Manual -> Driving -> Smart Brake Support (SBS)
Page 19 of 50
03/25/2024 02:56 PM tlawrenc
SBS is a system designed to avoid collisions and reduce
damage in the event of a collision by controlling the brakes.
Sensors and camera equipped on the vehicle detect objects,
and operate brake control if there is a possibility of your
vehicle colliding with the object.
One part of the SBS functions when you are driving forward
and the other part functions when you are driving in reverse.
Forward drive detection
Forward drive detection has the following 4 functions.
1. Forward detection function*
The forward detection function is designed to assist the driver
in avoiding collisions with objects (vehicles
ahead, pedestrians, bicycles, and motorcycles) at the front
and to reduce damage in the event of a collision.
If there is a possibility of your vehicle colliding with a target
object at the front, you are notified of possible danger by a
screen display and a
warning sound. Furthermore, if the possibility of a collision
increases,
brake control is performed to avoid collision and reduce
damage in the event of a collision.
In addition, when the driver depresses the brake pedal, the
brakes are applied firmly and quickly to assist.
2. Turn-Across Traffic*
The Turn-Across Traffic is designed to assist the driver in
avoiding a collision with a vehicle approaching in the opposite
direction when making a left turn at an intersection and to
reduce damage in the event of a collision.
If there is a possibility of your vehicle colliding with a vehicle
approaching in the opposite direction when you make a left
turn at an intersection, you are notified of possible danger by
a screen display and a warning sound.
Furthermore, if the possibility of a collision increases, brake
control is performed to avoid collision and reduce damage in
the event of a collision.
Page 20 of 50
03/25/2024 02:56 PM tlawrenc
3. Front Crossing*
Front Crossing is designed to assist the driver in avoiding a
collision at an intersection and reduce damage.
If there is a possibility of a collision with a vehicle at an
intersection, brake control is performed to avoid a collision or
to reduce damage in the event of a collision.
4. Intersection accident avoidance assist function*
Intersection accident avoidance assist function is designed to
avoid collisions with objects (pedestrians and bicycles) when
making a left or right turn at an intersection and to reduce
damage in the event of a collision.
If there is a possibility of your vehicle colliding with a target
object when you make a left or right turn at an intersection,
you are notified of possible danger by a screen display and a
warning sound. Furthermore, if the possibility of a collision
increases, brake control is performed to avoid collision and
reduce damage in the event of a collision.
Page 21 of 50
03/25/2024 02:56 PM tlawrenc
Reverse drive detection
Reverse drive detection has the following 2 functions.
1. Rearward detection function*
The rearward detection function is designed to assist the
driver in avoiding collisions with objects at the
rear (obstructions and pedestrians*) and to reduce damage in
the event of a collision.
If there is a possibility of your vehicle colliding with a target
object at the rear, you are notified of possible danger by a
screen display and a warning sound. Furthermore, if
the possibility of a collision increases, brake control is
performed to avoid collision and reduce damage in the event
of a collision.
2. Rear Crossing*
Page 22 of 50
03/25/2024 02:56 PM tlawrenc
The Rear Crossing is designed to avoid collision and reduce
damage in the event of a collision with a vehicle approaching
from the rear sides.
If there is a possibility of your vehicle colliding with a vehicle
approaching from the rear sides, you are notified of possible
danger by a screen display and a warning sound.
Furthermore, if the possibility of a collision increases, brake
control is performed to avoid collision and reduce damage in
the event of a collision.
Secondary Collision Reduction*
The Secondary Collision Reduction reduces secondary
damage by
decelerating the vehicle when it is damaged in a collision to
the extent that the airbags are deployed while driving.
If a collision occurs to the extent that the airbags are
deployed while driving, the hazard warning lights flash to
alert surrounding vehicles and the brakes are controlled to
reduce damage in the event of a collision with an
obstruction or other object.
Mazda Radar Cruise Control with Stop & Go Function
System (MRCC)
MRCC is a system that reduces load on the driver through
constant speed and headway control. The function performs
headway control to maintain the distance with a vehicle
ahead at a constant preset speed without you having to
depress the accelerator or brake pedal.
Owner's Manual -> Driving -> Secondary Collision
Reduction
Owner's Manual -> Driving -> Mazda Radar Cruise Control
(MRCC)
Page 23 of 50
03/25/2024 02:56 PM tlawrenc
Speed Limit Assist
It is possible to set the vehicle speed of the speed sign
recognized by the FSC and map information to the MRCC
with one touch (RES button).
Note: Navigation SD Card is required
User Customization
•
•
•
•
•
•
Manual (On)
Off
0 mph (same as speed limit sign)
3 mph offset
5 mph offset
10 mph offset
Cruising & Traffic Support (CTS)
The CTS is a system that reduces the load on the driver while
the vehicle is driven on expressways or highways. The CTS
has the following 2 functions.
Owner's Manual -> Driving -> Cruising & Traffic Support
(CTS)
Constant speed/Headway control function
The function performs headway control to maintain the
distance with a vehicle ahead at a constant preset speed
without you having to depress the accelerator or brake pedal.
Steering wheel assist function
When vehicle lane lines are detected, the function assists
your steering wheel operation to follow the vehicle
lane lines. When vehicle lane lines are not detected, the
function assists your steering wheel operation to follow
the trajectory of the vehicle ahead.
Distance & Speed Alert (DSA)
The DSA is a system in which the screen display notifies the
Owner's Manual -> Driving -> Distance & Speed Alert
(DSA)
Page 24 of 50
03/25/2024 02:56 PM tlawrenc
driver that the distance between your vehicle and a vehicle
ahead is close.
Lane-Keep Assist System*
The LAS is a system to help the driver stay within the vehicle
lane if the vehicle might be deviating. If your vehicle may be
deviating from the vehicle lane, the LAS provides steering
assistance to avoid departure from the lane.
Owner's Manual -> Driving -> Lane-keep Assist System
(LAS)
Lane Departure Warning System (LDWS)
The LDWS notifies the driver that the vehicle might be
deviating from its lane. If there is a possibility of your vehicle
deviating from the vehicle lane, a screen display and a
warning sound notify the driver of the danger.
Owner's Manual -> Driving -> Lane Departure Warning
System (LDWS)
Emergency Lane Keeping (ELK)*
Owner's Manual -> Driving -> Emergency Lane Keeping
Page 25 of 50
03/25/2024 02:56 PM tlawrenc
The ELK is a system designed to assist the driver’s steering
(ELK)
wheel operation to avoid danger. The ELK has the following
3 functions.
Road Keep Assist
The Road Keep Assist assists the driver to avoid departure
from the road.
If your vehicle may be deviating from the road, the Road
Keep Assist
provides steering assistance to avoid departure from the
road. In addition, a screen display and a warning sound notify
the driver of the danger.
Blind Spot Assist*
The Blind Spot Assist assists the driver in avoiding collisions
with vehicles in adjacent lanes (excluding
vehicles approaching in the opposite direction).
If there is a possibility of a collision with a vehicle in an
adjacent lane
when you try to change lanes or if you may deviate from your
lane, the Blind Spot Assist assists your steering
wheel operation to keep you in the driving lane. In addition, a
screen display and a warning sound notify the driver of the
danger.
Head-on traffic avoidance assist*
The Head-on traffic avoidance assist assists you in avoiding a
collision with a vehicle approaching in the oncoming lane and
your vehicle.
If there is a possibility of a collision with a vehicle
Page 26 of 50
03/25/2024 02:56 PM tlawrenc
approaching in the
oncoming lane due to your vehicle departing from its lane, the
Head-on traffic avoidance assist assists your steering wheel
operation to keep you in the original driving lane. In
addition, a screen display and a warning sound notify the
driver of the danger.
High Beam Control System (HBC)*
The HBC determines the conditions in front of the vehicle
while driving at night to automatically switch the headlights
between high and low beams.
Owner's Manual -> Driving -> High Beam Control System
(HBC)
Blind Spot Monitoring (BSM) System
The BSM is a system that assists the driver in checking for
vehicles at your rear when making a lane change. When a
vehicle approaching from the rear is detected, various screen
displays and warning sounds notify the driver of the danger.
Owner's Manual -> Driving -> Blind Spot Monitoring (BSM)
Page 27 of 50
03/25/2024 02:56 PM tlawrenc
Vehicle Exit Warning
The vehicle exit warning is a system that assists the driver in
checking the rear of the vehicle when exiting the vehicle.
When a vehicle or bicycle approaching from the rear is
detected, various screen displays and warning sounds notify
the driver of the danger.
Detectable Scenes
1. Bicycle approaches from the rear side
2. Pedestrians pass by the side
Page 28 of 50
03/25/2024 02:56 PM tlawrenc
3. Other scenes
Front Cross Traffic Alert (FCTA) System
The FCTA assists the driver in checking both sides of the
vehicle when the vehicle starts to drive at an intersection.
When a vehicle approaching from the blind spots on the front
left or right side is detected, a screen display and warning
sound notify the driver of the danger.
Owner's Manual -> Driving -> Front Cross Traffic Alert
(FCTA)
Page 29 of 50
03/25/2024 02:56 PM tlawrenc
Rear Cross Traffic Alert (RCTA) System
The RCTA assists the driver in checking the area to the rear
of the vehicle, such as while reversing out of a parking space.
When a vehicle approaching from the rear on the left or right
is detected, various screen displays and warning sounds
notify the driver of the danger.
Owner's Manual -> Driving -> Rear Cross Traffic Alert
(RCTA)
When the RCTA operates, the driver is notified of the danger
by flashing of the BSM warning lights, a warning indication,
and a warning sound.
Page 30 of 50
03/25/2024 02:56 PM tlawrenc
Driver Attention Alert (DAA) System
The DAA is a system that detects the driver fatigue and
decreased
attentiveness based on various types of vehicle information,
and encourages the driver to take a rest using a
screen display and warning sound.
Owner's Manual -> Driving -> Driver Attention Alert (DAA)
Driver Monitoring (DM)*
The DM is a system that detects dangerous conditions and
behavior of the driver and notifies the driver of possible
danger. The DM has two detection functions.
Drowsiness detection function
The drowsiness detection function detects the level of driver
Owner's Manual -> Driving -> Driver Monitoring (DM)
drowsiness.
When the driver drowsiness is detected, the screen display
and warning sound encourage the driver to take a
rest. There are 2 levels of screen display and warning sound.
• Warning pattern (caution)
Page 31 of 50
03/25/2024 02:56 PM tlawrenc
• Warning pattern (warning)
Inattentive driving detection function
The inattentive driving detection function detects that the
driver is not paying attention to the road. When the system
detects that the driver is not paying attention to the road, it
alerts the driver with a screen display and a warning sound.
Page 32 of 50
03/25/2024 02:56 PM tlawrenc
Traffic Sign Recognition System (TSR)*
The TSR is a system to notify the driver of traffic signs by
displaying traffic signs on the screen which are recognized
by the vehicle while driving.
Owner's Manual -> Driving -> Traffic Sign Recognition
System (TSR)
360° View Monitor System
The 360° view monitor is a system which assists the driver in
checking safety by displaying the conditions around the
vehicle on the center display when the vehicle is driven at low
speeds or when the vehicle is parked or stopped.
Display Button
Owner's Manual -> Driving -> 360° View Monitor
Top View
Page 33 of 50
03/25/2024 02:56 PM tlawrenc
Front View
Front Wide View
Side View
Rear View
Rear Wide View
Page 34 of 50
03/25/2024 02:56 PM tlawrenc
See-Through View
The See-Through View is a function that combines the
images taken by each camera and processes them to look as
if the vehicle is transparent and displays them on the center
display.
Front See-Through View
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-020-24
Replacement Service Bulletin Number:
MFR Communication Date: 2024-03-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.