Loading...

NHTSA ID Number: 10252026

Manufacturer Communication Number: V5824012073320_1

TSB/Document Date: 2024-04-04


Summary

Software version management, Update programming for both rear door window motors.


Technical Service Bulletin

58-24-01 – Update Programming Rear Door Window Motor(s)

Transaction No:

2073320/1

Release date:

3/20/2024

Condition
Applicable Vehicles
Models

Year

Eng. Code

Trans. Code

VIN Range From

VIN Range To

Atlas

2024

All

All

CA_RC500000

CA_RC528033

Atlas Cross Sport

2024

All

All

CA_RC200000

CA_RC214987

Revision Table
Instance Number

Published Date

Version Number

2073320/1

3/20/2024

58-24-01

Reason for Update
Original Publication.

If software updates or flash campaign/actions are performed on a vehicle, a charger with at least
70A charging current MUST be used in order to avoid problems during software updates and
flash campaign/actions.
• DO NOT diagnose or replace the rear window motor(s) before performing the update function
as explained in this bulletin.

Technical Background
Customer complains that the rear window(s) one touch is inoperative.
The rear window motor changed from hall sensor to sensor-less position control to detect window
position.
Rear window motors are losing basic settings due to window free-fall affect when traveling down causing
high motor frequency and low ripple detection.

Production Solution
Software implemented October of 2023.

Page 1 of 5
© 2024 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

58-24-01 – Update Programming Rear Door Window Motor(s)

Transaction No:

2073320/1

Release date:

3/20/2024

Service

The focus of this repair is to reprogram the door control modules after switching rear window
motors.

Procedure:
Switch the left rear window motor to the right rear window motor and the right rear window motor to the
left rear window motor. See Repair Group 58 in Elsa.
Perform update SVM 4D83.
To Update-Programming using Software Version Management (SVM), review and follow instructions in
Technical Bulletin Instance 2014603 “Software Version Management”.

The Midtronics battery charger must be connected to the vehicle battery for the duration of the
programming, to ensure the battery state of charge remains above 12.5 volts during the update
process. If the battery drops below 12.5 volts, the programming could fail which may result in
damage to the control module. Control modules damage by inadequate voltage will not be
covered under warranty policy. The technician should verify the vehicle voltage prior to starting
the update process, and should monitor the voltage for the duration of the update.
• The procedure may cancel itself if the hazard warning lights are not switched ON. The hazard
lights prevent the system from switching to bus sleep mode during the update. ODIS-Service
tester should be updated to the latest GFF technical version 23.2.2 or higher and SW version
2.49.8 or higher
Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that
personal injury may result if contact is made with spinning fan blades. Keep hands and all
objects away from Radiator Fam(s) during the Update Process.

Page 2 of 5
© 2024 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

58-24-01 – Update Programming Rear Door Window Motor(s)

Transaction No:

2073320/1

Release date:

3/20/2024

Prior to launching the ODIS Service diagnostic applications and starting control module update
process, confirm tester screen saver and power settings in accordance with Diagnostic Device
Hardware & Windows® - VHW-20-02 Change Power Options After Windows®10 Upgrade. Failure
to do so may result in the tester entering power save mode during data transfer, and subsequent
control module failure. When using a VAS 6150/X or 6160/X tester in conjunction with a VAS
6154 wireless transmitter head for a flash procedure, connect a USB cable between the
transmitter head and the tester. Failure to do so may lead to errors during the flash procedure.
VAS tools must only be used with their power adapters plugged in. Under no circumstances should they
be used on battery power alone during the programming

Update-Programming using Software Version Management (SVM), review and follow
instructions in Technical Bulletin Instance 2014603 “Software Version Management”.
The SVM process must be completed in its entirety, so the database receives the update
confirmation response. A warranty claim may not be reimbursed if there is no confirmation
response to support the claim or action is carried out that is not explicitly stated in the
Technical Bulletin.

The following control modules will be updated to a recent version number:
00BB Rear driver side door electrics DSDL2 + Coding + Adapt/calibrate
00BC Rear passenger side door electronics DSDL2 +v Coding + Adapt/calibrate

The procedure can be found in GFF under functions/Component Selection, Software Version
Management, Adapting Software.

Page 3 of 5
© 2024 VolkswageneBay logo Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

58-24-01 – Update Programming Rear Door Window Motor(s)

Transaction No:

2073320/1

Release date:

3/20/2024

Warranty

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies
and Procedures Manual.
Models

Year(s)

Eng. Code(s)

Trans.
Code(s)

VIN Range
From

VIN Range To

Atlas

2024

All

All

CA_RC500000

CA_RC528033

Atlas Cross Sport

2024

All

All

CA_RC200000

CA_RC214987

SAGA Coding
Claim Type:

Use applicable Claim Type 1)

Service Number:

Damage Code

HST

Damage Location
(Depends on Service
No.)

6461
Parts Manufacture

0040

--

Atlas, Atlas Cross Sport

Labor Operation 3) : Remove + Install driver
& passenger side rear door window motor

64611999 = 20 TU

Labor Operation 3) : Remove + Install driver
& passenger door trim

70731999 = 60 TU

Labor Operation 3) : Battery Charge

27068950 = 20 TU

Labor Operation 3) : SVM Programming

01500060 = 70 TU

-YEY 2)

Diagnostic Time 4)
GFF Time
expenditure

01500060 = Actual GFF print out. 70 TU
max.

YES

Road Test

01210002 = 00 TU

NO

01210004 = 00 TU
Technical Diagnosis

01320000 = 00 TU max.

NO

Page 4 of 5
© 2024 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of VolkswageneBay logo Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

Transaction No:

2073320/1

Release date:

3/20/2024

58-24-01 – Update Programming Rear Door Window Motor(s)

Claim Comment: Input “As per Technical Bulletin 2073320” in comment section of Warranty
Claim.
Vehicle may be outside warranty in which this Technical Bulletin is informational only.
Code per warranty vendor code policy.
Labor Time Units (TUs) are subject to change with ELSA updates.
Documentation required per Warranty Policies and Procedures Manual.

Required Parts and Tools
No Special Parts required.

Tool Description

Tool Number

Midtronics Battery Maintainer

MYRMSP0702

VAS Diagnostic Tool

VAS 6150/X & VAS 6160/X and ODIS Service with: current online
updates

USB

3G8.919.360.P

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.

Page 5 of 5
© 2024 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

1

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, Supports J2534/D-PDU/CAN-FD/DoIP
318 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, Supports J2534/D-PDU/CAN-FD/DoIP
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
Bestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [139.81 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: V5824012073320_1

Replacement Service Bulletin Number:

MFR Communication Date: 2024-03-20

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ELECTRICAL SYSTEM

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Diagnostic Scan Tool, ECU Coding PMI OBD2 Scanner
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
Sale
2026 BOSSOMM IF745 Full System OBD2 Scanner Code Reader
  • 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
  • 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
  • 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
  • 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
  • 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.

This product presentation was made with AAWP plugin.

Share to...