Technical Service Bulletin
43 Replaced adaptive damping suspension control module cannot be coded
43 13 19 2034162/1 June 17, 2013.

Model(s)

Year

S4

2009 – 2014

S5

2008 – 2014

RS5

2013 - 2014

S4 CAB

2010 - 2014

RS5 CAB

2013 – 2014

VIN Range

Vehicle-Specific Equipment

All

1BL – Adaptive Damping Suspension

Condition
The adaptive damping suspension control module, J250, cannot be coded via SVM spec/actual after it has been
replaced.

Technical Background
A new generation of the adaptive damping suspension control module, J250, was placed into production. The
new generation control module must be coded and parameterized using an SVM code, which is listed in the
attached ETKA Parts Bulletin, 9-119. This parts bulletin can be found in the ETKA Remarks for the part number
(Figure 1).

Figure 1. Parts Bulletin in ETKA.

Production Solution
Not applicable.

Page 1 of 3 plus attachment
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written
permission of the publisher.

Technical Service Bulletin
Service
When replacing the adaptive damping suspension control module, J250, perform an SVM coding and
parameterization using the provided SVM code.
The software version will not change because there is no software update.

Model

Old Software
Part Number

Old Software
Version

8K0907364

*

8K0907364A

*

New Software
Part Number
8K0907364
8K0907364A
8K0907364A

New
Software
Version

SVM Action Code

*
*

8R0907364
S4

8R0907364

*

8R0907364B

*

8R0907364C

S5, RS 5

S5 CAB, RS 5 CAB

8R0907364B

*

8R0907364C

*

8K0907364

*

8K0907364A

*

8R0907364A

*

8R0907364B

*

8R0907364C

*

8R0907364A

*

8R0907364B
8R0907364C

*

8R0907364B
8R0907364C
8R0907364C
8K0907364
8K0907364A
8K0907364A
8R0907364A
8R0907364C
8R0907364B
8R0907364C
8R0907364C
8R0907364A
8R0907364C

*
*
*
*

XCHG14A001

*

*
*
*

8R0907364B
8R0907364C

*

8R0907364C

Page 2 of 3 plus attachment
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written
permission of the publisher.

Technical Service Bulletin
Warranty
Claim Type:

Use applicable claim type. If vehicle is outside any warranty, this Technical Service
Bulletin is informational only.

Service Number:

4316

Damage Code:

0040

Labor Operation:

SVM documentation feedback

0150 0000

Time stated on
diagnostic
protocol (MAX 60
TU)

Diagnostic Time:

GFF

No allowance

0 TU

Road test prior to service procedure

No allowance

0 TU

Road test after service procedure

No allowance

0 TU

Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:

As per TSB #2034162/1

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.

Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with
your Parts Department and service manuals for the latest information.

Page 3 of 3 plus attachment
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written
permission of the publisher.

08.12
AUDI, I/VK-42
Martin Zäuner

All

9

119

SVM code for electronically controlled damping control unit SDC J250

Model

Audi A4, A5, Q5

Installed item
part number

8R0 907 364 xx
8K0 907 364 xx

SVM code

XCHG14A001

Replacement item
part number

8R0 907 364 xx
8K0 907 364 xx

x = place marker

Input SVM code using VAS tester.
When the code will not execute, carry out actual/targe comparison.

Seite 1 von 1