NHTSA ID Number: 10250379
Manufacturer Communication Number: M610124
TSB/Document Date: 2024-03-02
Summary
Customers with a genuine MINI “Click and Drive System†(C&D) accessory installed may complain of steering system check control messages (CCM) and reduced steering functionality. The concern starts after a software update to 4.28.1.x (21-03-500) or greater, and the issue can be duplicated after placing a device on the MINI (C&D) Click and Drive accessory. One or more of the following CCM may be stored: Steering effort increased Driving Stabilization failed Speed control failed Collision warning failed Pedestrian warning failed
2/13/24, 5:24 AM
61 01 24_CLICK AND DRIVE ACCESSORY AFFECTS ELECTRONIC POWER STEERING (EPS) FUNCTIONALITY
SIM 61 01 24
2024-02-01
CLICK AND DRIVE ACCESSORY AFFECTS ELECTRONIC POWER
STEERING (EPS) FUNCTIONALITY
☐
THIS REPAIR IS MOBILE FRIENDLY
MODEL
E-Series
F54
F55
F56
F57
F60
Model Description
MINI Clubman
MINI Hardtop 4 Door
MINI Hardtop 2 Door
MINI Convertible
MINI Countryman
Production Date
from SOP 2013
SITUATION
Customers with a genuine MINI “Click and Drive System” (C&D) accessory installed may complain of
steering system check control messages (CCM) and reduced steering functionality.
The concern starts after a software update to 4.28.1.x (21-03-500) or greater, and the issue can be
duplicated after placing a device on the MINI (C&D) Click and Drive accessory.
One or more of the following CCM may be stored:
Steering effort increased
Driving Stabilization failed
Speed control failed
Collision warning failed
Pedestrian warning failed
Possible customer scenarios:
Before driving: If the customer wants to charge a smartphone via the USB connection on the MINI C&D and plugs it in
before driving, the CCM messages mentioned above occur as soon as the ignition (KL15) is switched on
While driving: If the customer plugs in their mobile phone while the engine is running, nothing happens at first. Only when
the vehicle activates the automatic start/stop (vehicle stops at the traffic lights and engine stops), then the above
mentioned CCM messages occur.
A temporary solution for the customer to avoid a broken-down vehicle: Unplug the smartphone, turn
off the engine AND ignition, wait a moment and then start the engine again- The steering assist
should work again, and the customer can drive to a workshop.
Note: When installing the MINI Click and Drive accessory always use the most up-to-date installation
instructions, found in the Electronic Parts Catalog (EPC).
CAUSE
Changes in the vehicle software have increased the electrical demands of the 15N_1 circuit. A preinstalled
MINI C&D accessory may cause drops in voltage and module resets making components erratic.
CORRECTION
If the MINI C&D connection (+) A1* is installed at the BDC connector A258*3B pin 20, the MINI C&D (+) A1*
connection must be moved to the front power distribution box.
Note: Replacing the vehicle’s electric steering gear assembly will not correct this issue.
Copyright ©2024 MINI USA, a division of BMW
of North America, LLC. All Rights Reserved
about:blank
1/4
2/13/24, 5:24 AM
61 01 24_CLICK AND DRIVE ACCESSORY AFFECTS ELECTRONIC POWER STEERING (EPS) FUNCTIONALITY
PROCEDURE
Refer to Attachment
PARTS INFORMATION
To determine the part number that applies to the specific vehicle being repaired, enter the VIN/chassis
number into either ETK or AIR, this will consider the specific equipment and/or options that are fitted to the
vehicle.
Part Number
61 13 6 917 401
61 13 9 232 673
Or
61 13 5 A7D 687
Or
66 21 5 A77 F90
Description
(J) Fuse MINI, yellow-brown (5A)
(I) Socket contact MCP 2.8 (0.2 - 0.35 mm²)
Quantity
1
1
(I) Socket contact MCP 2.8 (0.2 - 0.35 mm²)
1
(K) SZ power distributor box (Set)
Sublet for the used item
CLAIM INFORMATION
Covered under the terms of the MINI New Passenger Car Limited Warranty as described below.
Repair Code:
7260001400
Other accessories Occasional malfunction
Obtain the flat rate unit (FRU) allowances for the following that applies.
Labor
Operation
00 00 006
Or:
00 00 556
And:
Description
Labor Allowance
Carrying out vehicle test (Main work)
As applicable
Carrying out vehicle test (Plusposition)
As applicable
Supporting voltage of the vehicle electrical system /
recharging vehicle battery
As applicable
61 00 006*
Carrying out vehicle diagnosis, ABL (Work time) (Including
further diagnosis as outlined in the Procedure)
WT
Or:
00 58 500*
And:
Diagnosis Worktime Flat Rate
2 FRU
61 14 535
Removing and installing/replacing front positive battery
cable power distribution (Plusposition)
As applicable
Work time to move the MINI C&D (+) A1* connection to the
front power distribution box.
3 FRU
61 21 528
And, as needed:
And:
61 99 000
If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of
00 00 006, or exclude them (including 61 21 528) when the Vehicle Test is included in another repair.
Work time labor operation codes 61 00 006, 00 58 500, and 61 99 000 are not considered Main labor operations.
Sublet – Bulk Material (RO and Claim Comments Required)
See the sublet
Sublet Code
reimbursement
4
calculations below
Reimbursement for the repair-related bulk materials (Do not use
the MINI part numbers for claim submission)
Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank
2/4
2/13/24, 5:24 AM
61 01 24_CLICK AND DRIVE ACCESSORY AFFECTS ELECTRONIC POWER STEERING (EPS) FUNCTIONALITY
Sublet reimbursement calculation for claiming the applicable repair-related bulk materials (MINI part
number) is at the dealer net price amount for the proportional quantities used plus your dealer’s handling.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
BMW Group’s AIR Application Resource for Flat Rate Labor Operation Codes
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW Group AIR application
resource, start by entering the Chassis Number (the last seven (7) characters of the VIN, select the
applicable Model if two or more vehicle choices show), or enter the full VIN (17 characters), click on the
“Search” button. Next, click on the “Flat Rate Units” button and enter the flat rate labor operation code in the
field to the right, click “Search” to display the Flat Rate Unit Group detail choices.
Other Repairs
If other eligible and covered work is performed because of performing the ISTA diagnostics and related test
plans, claim this work with the applicable Repair Code listed in AIR together with the corresponding labor
operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that applies.
(*) Based on which one applies to your dealer, please refer to SI M01 01 20 or M01 04 20 for the applicable procedure for
documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis work time (WT), job/repair
work time (WT), and the vehicle repairs your dealer performed, unless otherwise required by State law.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Supporting Materials
picture_as_pdf M610124 Attachment Click and Drive Installation Instruction 2451654 1_2024.pdf
picture_as_pdf M610124.pdf
Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank
3/4
2/13/24, 5:24 AM
61 01 24_CLICK AND DRIVE ACCESSORY AFFECTS ELECTRONIC POWER STEERING (EPS) FUNCTIONALITY
Copyright ©2024 MINI USA, a division of BMW of North America, LLC. All Rights Reserved
about:blank
4/4
Attachment to M61 01 24
January 2024
ORIGINAL MINI
PARTS AND ACCESSORIES.
INSTALLATION INSTRUCTIONS.
MINI Click & Drive System Retrofit.
MINI Clubman (F54)
MINI 5-door (F55)
MINI 3-door (F56)
MINI Convertible (F57)
MINI Countryman (F60)
Retrofit kit number
65 90 2 448 753
MINI Click & Drive System base rack
65 90 2 471 026
MINI Click & Drive System base rack
66 21 5 A77 F90
SZ power distributor
Installation time
The installation time is approx. 0.75 hours. This may vary depending on the condition of the vehicle and its
equipment.
Important information
If the EPS control in the instrument cluster is lit, terminal 15 must be connected using the SZ power distributor.
These installation instructions are primarily designed for use within the MINI dealership organisation and by
authorised MINI service companies.
In any event the target group for these installation instructions is specialist personnel trained on MINI cars
with the appropriate specialist knowledge.
All work must be completed using the latest MINI repair manuals, wiring diagrams, servicing manuals and
work instructions, in a rational order, using the prescribed tools (special tools) and observing current health
and safety regulations.
If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for
mechanical work and 1.0 hours for electrical work.
To avoid unnecessary extra work and/or costs, please send an inquiry to the technical parts support team.
Quote the following information:
– Chassis number,
– Retrofit kit part number,
– A detailed description of the problem,
– any work already carried out.
Please do not archive the printout of these installation instructions. The current version can be found in the
EPC.
Pictograms
Denotes instructions that draw your attention to dangers.
!
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or other text.
© BMW AG, Munich
01 29 2 451 654
01/2023
(Z/Z)
4.6
1/15
Attachment to BXXXXXX
November 2023
Installation information
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising
from this will not be reimbursed by BMW AG.
Additional cables/wires that are installed must be secured with cable ties. If the specified PIN chambers are
occupied, bridges, double crimps, or twin-lead terminals must be used.
All pictures show LHD (left-hand drive) cars; proceed accordingly on RHD (right-hand drive) cars.
Ordering instructions
The following parts are not supplied in the retrofit kit and must be ordered separately (see EPC for part
number and details):
– Socket contact MCP 2.8 x 0.8 I
– MINI 5A fuse J
© BMW AG, Munich
01 29 2 451 654
01/2023
(Z/Z)
4.6
2/15
Attachment to BXXXXXX
November 2023
Section
Page
1. Parts list for retrofit kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
2. SZ power distributor parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
3. Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
4. Retrofit wiring harness connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
5. SZ power distributor retrofit wiring harness connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
6. Installation and cabling diagram for LHD (left-hand drive) cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
7. Installation and cabling diagram for RHD (right-hand drive) cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
8. Installing the Click & Drive System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
9. Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
10. Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
© BMW AG, Munich
01 29 2 451 654
01/2023
(Z/Z)
4.6
3/15
Attachment to BXXXXXX
1.
November 2023
Parts list for retrofit kit
Legend
A
B
C
D
E
F
G
H
I
J
Holder
Screw (2 x)
Ball holder
Miniature connector (2 x)
Cable ties (5 x)
End-stop damper (F54, F55, F56 and F57 cars only)
End-stop damper (for F60 cars only)
Installation information (give to the customer)
Socket contact MCP 2.8 x 0.8 (not supplied with the retrofit kit)
MINI 5A fuse (not included in the retrofit kit)
© BMW AG, Munich
01 29 2 451 654
01/2023
(Z/Z)
4.6
4/15
Attachment to BXXXXXX
November 2023
2.
SZ power distributor parts list
K
L
M
N
O
P
SZ power distributor, RED cable
Pin contact, 0.5 -1.0 mm² (2 x)
SW 2-pin plug housing
SW 2-pin socket housing
2-way miniature connector (2 x)
Cable ties (2 x)
© BMW AG, Munich
01 29 2 451 654
01/2023
(Z/Z)
4.6
5/15
Attachment to BXXXXXX
3.
November 2023
Preparatory work
ISTA/AIR No.
Disconnect the negative battery cable
61 20 900
Release and disconnect various plug connections
61 13 ...
Cut, strip and crimp cables
61 11 ...
Open the plug housing and remove the contacts from various connection systems
61 13 ...
Instructions for handling wiring harnesses and cables
61 00 ...
Instructions for handling the documents: Repair manual, technical data,
tightening torques
00 11 ...
The following components must be removed first of all
Instrument panel
62 11 280
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: M610124
Replacement Service Bulletin Number:
MFR Communication Date: 2024-02-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.