NHTSA ID Number: 10250099
Manufacturer Communication Number: 11243A
TSB/Document Date: 2024-02-12
Summary
Propshaft Bolt Inspection
Bulletin No.: 11243A
Date: September 2013
Program Bulletin
CUSTOMER SATISFACTION PROGRAM
SUBJECT:
Propshaft Bolt Inspection
MODELS:
2011 Chevrolet
Express
2011 GMC
Savana
This program is being extended until March 31, 2014. Please discard all copies of bulletin
11243.
THIS PROGRAM IS IN EFFECT UNTIL MARCH 31, 2014.
CONDITION
On certain 2011 model year Chevrolet
Express and GMC
Savana vehicles, two of the four bolts
that attach the propshaft to the rear axle may not be fastened to the proper specification and
may begin to loosen. This would result in an unusual noise and/or vibration. If the bolts
continue to loosen and the propshaft separates from the rear axle, the power to the wheels will
no longer be delivered. The engine will continue to run and power braking and steering will not
be affected.
CORRECTION
Dealers are to inspect the propshaft bolts to ensure they are properly fastened.
VEHICLES INVOLVED
Involved are certain 2011 model year Chevrolet
Express and GMC
Savana vehicles.
Important: Dealers are to confirm vehicle eligibility prior to beginning repairs by using the
Required Field Actions section in the Global Warranty Management system. Not all
vehicles may be involved.
For dealers with involved vehicles, a listing with involved vehicles containing the complete
vehicle identification number, customer name, and address information has been prepared and
will be provided to dealers through the GM GlobalConnect Recall Reports. Dealers will not have
a report available if they have no involved vehicles currently assigned.
Copyright 2011 General Motors
. All Rights Reserved.
Page 2
September 2013
Bulletin No.: 11243A
The listing may contain customer names and addresses obtained from Motor Vehicle
Registration Records. The use of such motor vehicle registration data for any purpose other
than follow-up necessary to complete this program is a violation of law in several
states/provinces/countries. Accordingly, you are urged to limit the use of this report to the
follow-up necessary to complete this program.
PART INFORMATION
No parts are required for this program.
SERVICE PROCEDURE
1.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
2702481/2702542
2.
Determine if the rear propeller shaft retaining bolts (1) are secure and tightened to
25 Nm (18 lb-ft).
If the retaining bolts (1) are secure and tightened to 25 Nm (18 lb-ft), proceed to Step 3.
If the retaining bolts (1) are not secure and tightened to 25 Nm (18 lb-ft), tighten the
retaining bolts to 25 Nm (18 lb-ft) using a torque wrench and then proceed to Step 3.
3.
Lower the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
COURTESY TRANSPORTATION
The General Motors
Courtesy Transportation program is intended to minimize customer
inconvenience when a vehicle requires a repair that is covered by the New Vehicle Limited
Warranties. The availability of courtesy transportation to customers whose vehicles are within
the warranty coverage period and involved in a product program is very important in maintaining
customer satisfaction. Dealers are to ensure that these customers understand that shuttle
service or some other form of courtesy transportation is available and will be provided at no
charge. Dealers should refer to the General Motors
Service Policies and Procedures Manual for
Courtesy Transportation guidelines.
Page 3
September 2013
Bulletin No.: 11243A
WARRANTY TRANSACTION INFORMATION
Submit a transaction using the table below.
Labor
Code
V2469
Description
Inspect and/or Tighten Propshaft Retaining Bolts
Labor
Time
0.3
CUSTOMER NOTIFICATION
General Motors
will notify customers of this program on their vehicle (see copy of customer
letter included with this bulletin).
DEALER PROGRAM RESPONSIBILITY
All unsold new vehicles in dealers' possession and subject to this program must be held and
inspected/repaired per the service procedure of this program bulletin before customers take
possession of these vehicles.
Dealers are to service all vehicles subject to this program at no charge to customers, regardless
of mileage, age of vehicle, or ownership, through March 31, 2014.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for
which there is no customer information indicated on the involved vehicle listing, are to be
contacted by the dealer. Arrangements are to be made to make the required correction
according to the instructions contained in this bulletin. A copy of the customer letter is provided
in this bulletin for your use in contacting customers. Program follow-up cards should not be
used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this program enters your vehicle inventory, or is in
your facility for service through March 31, 2014, you must take the steps necessary to be sure
the program correction has been made before selling or releasing the vehicle.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that
may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the tools,
equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to
your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 4
September 2013
Bulletin No.: 11243A
September 2011
Dear General Motors
Customer:
We have learned that on your 2011 model year Chevrolet
Express or GMC
Savana, two of the
four bolts that attach the propshaft to the rear axle may not be fastened to the proper
specification and may begin to loosen. This would result in an unusual noise and/or vibration. If
the bolts continue to loosen and the propshaft separates from the rear axle, the power to the
wheels will no longer be delivered. The engine will continue to run and power braking and
steering will not be affected.
Your satisfaction with your vehicle is very important to us, so we are announcing a program to
prevent this condition.
What We Will Do: Your GM dealer will inspect the propshaft bolts to ensure that they are
properly fastened. This service will be performed for you at no charge until March 31, 2014.
After that, any applicable warranty will apply.
What You Should Do: To limit any possible inconvenience, we recommend that you contact
your dealer as soon as possible to schedule an appointment for this repair.
If you have any questions or concerns that your dealer is unable to resolve, please contact the
appropriate Customer Assistance Center at the number listed below.
Division
Number
Chevrolet![]()
GMC![]()
Guam
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
1-800-222-1020
1-800-462-8782
65-6267-1752
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones
(TTY)
1-800-833-2438
1-888-889-2438
Courtesy Transportation: If your vehicle is within the New Vehicle Limited Warranty, your
dealer may provide you with shuttle service or some other form of courtesy transportation while
your vehicle is at the dealership for this repair. Please refer to your Owner Manual and your
dealer for details on Courtesy Transportation.
We sincerely regret any inconvenience or concern that this situation may cause you. We want
you to know that we will do our best, throughout your ownership experience, to ensure that your
GM vehicle provides you many miles of enjoyable driving.
Jim Moloney
General Director,
Customer and Relationship Services
11243
- PRECISE & HIGH QUALITY - Manufactured in Taiwan, our torque...
- DURABLE - Built to last, featuring a reinforced ratchet gear...
- LONGEVITY - Protect your investment with our proprietary...
- PERFORMANCE - Easily read and set torque levels with our...
- OMFORT - Equipped with a reversible ratchet head that drives...
- 【9-in-1 Torque Solution】Complete set includes...
- 【High Precision & Dual Scales】Factory-calibrated to...
- 【Clear & Safe Audible Click】Upgraded loud "Click" sound...
- 【Smooth 72-Tooth Ratchet & Quick Release】Reversible...
- 【Durable Construction & Wide Use】Hardened Cr-V steel...
Last update on 2026-06-29 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 11243A
Replacement Service Bulletin Number:
MFR Communication Date: 2013-09-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-07-08 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




