NHTSA ID Number: 10246104
Manufacturer Communication Number: 15-211-17R
TSB/Document Date: 2023-12-05
Summary
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2017 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY: 2017-18MY Impreza
NUMBER: 15-211-17R
2018MY Crosstrek DATE: 06/13/17
2018MY Legacy and Outback
REVISED: 11/13/23
2018MY BRZ*
SUBJECT:
Reprogramming File Availability for Additional
Optimization of Harman Gen 3 Audio and
Navigation Head Units
INTRODUCTION:
The following information addresses reprogramming file availability and a software update
installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units
utilized in the models as listed above. The procedure will involve either downloading the software
update files from Subarunet (or using those sent directly from Nuspire) and transferring them onto
a flash drive for head unit installation. These files do NOT include Map Update data. It is VERY
IMPORTANT to read and understand this information completely to understand all changes from
prior releases before proceeding. A time line chart along with a complete list of all the conditions
addressed by this and previous Harman 3.0 software updates is provided in “Appendix A” located at
the end of this bulletin.
IMPORTANT NOTES:
•
If a vehicle presents with a current blank or black screen condition, request an exchange unit.
•
Be sure to locate and re-format any existing USB drives used for updating Harman audio units in
order to fully clear them before adding these new files to them.
If a Map update is pending, please follow the instructions posted on Subarunet: Service
Operations & Technical > Forms/Downloads > Navigation System Map Updates and select the
applicable link.
•
CAUTION: NEVER attempt to install this software on
any 2019 MY vehicles as they are equipped with Gen 3.1
Audio/ Navigation systems. This update is ONLY for models
equipped with Gen 3.0 Audio/ Navigation systems. Should
an attempt be made to install any of these files into a Gen 3.1
head unit, the authentication error screen to the right will be
displayed.
* NOTE: On BRZ models, this update applicable to HIGH / Navigation - equipped head units only.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
SUBARU OF AMERICA, INC. IS
ISO 14001 COMPLIANT
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-211-17R; Revised 11/13/23
Page 1 of 22
•
If the navigation maps have been recently updated, the newest software may have already been
installed at the same time. This may eliminate the need to attempt any further update of the
software. ALWAYS check the head unit’s software version prior to attempting any new software
installation.
PRODUCTION CHANGE INFORMATION:
These latest updates (June 2019) apply to the models listed above equipped with Harman Gen 3.0
Audio and Navigation head units only. They include all previous enhancements implemented in all
prior software updates INCLUDING the previously released WTN-74R updates. Therefore, if
WTN-74R is still open, these latest updates will continue to satisfy the campaign. See the
WARRANTY / CLAIM INFORMATION section at the end of this bulletin for further instructions.
The latest software version (including all available updates) was incorporated into production per the
starting VIN table below:
Model
Starting VIN
Legacy
Outback
Impreza 4-Door
Post Production
Impreza 5-Door
Crosstrek
BRZ
Multimedia System Type
Descriptive Features
6.5 Inch Display Audio System (Base)
No CD slot / Eject Button
8.0 Inch Display Audio System (Mid)
Phone Button
8.0 Inch Audio / Navigation System (High)
Map Button but no Phone Button
2018MY Legacy and Outback Harman Audio / Navigation system Faceplate images
BASE
MID
NO CD Player
PHONE Button
HIGH
MAP Button
Continued...
Bulletin Number: 15-211-17R; Revised 11/13/23
Page 2 of 22
Materials Required:
16GB (MINIMUM) USB 2.0 or 3.0 flash drives which are readily available at most office supply
retailers will be needed to perform these updates.
Recommended Flash Drives:
•
Kingston®: Data Traveler G3, G4, SE9 or the Hyper-X Series
•
SanDisk®: Cruzer Series, Ultra Flair
•
Transcend®: JetFlash 300, 600 or 790
•
Verbatim®: Store ‘n’ Go
NOTES:
• The USB flash drives can be USB 2.0 or 3.0.
•
The USB flash drive MUST be reformatted to NTFS before loading any files to it. NTFS is
not the standard format on most USB flash drives.
•
The update files are not overly large but, during the reprogramming procedure, the head unit
backs up some files to the USB drive. For this reason, sufficient USB drive memory size is
required, especially for the High / Navigation units.
•
The flash drives should be dedicated to storing these reprogramming files only. Do NOT
use any flash drives which contains or requires the use of file management, encryption, file
backup or other software to function properly.
•
Re-format (see Step 2) any prior USBs you may have used for WTN -74R as that version of
software must no longer be installed. This update includes all WTN -74R updates.
Continued...
Bulletin Number: 15-211-17R; Revised 11/13/23
Page 3 of 22
SERVICE PROCEDURE / INFORMATION:
Affected Vehicles / Audio Units:
Vehicle Model
2017-18MY Impreza &
2018MY Crosstrek
Audio Unit Type (High, Mid, Base)
Audio Unit
Part Number
NAVIGATION (HIGH)
86271FL60A
8-Inch Display Audio (MID)
6.5-Inch Display Audio (BASE)
NAVIGATION (HIGH)
2018MY Legacy / Outback
2018MY BRZ
8-Inch Display Audio (MID)
86201FL62A
86201FL63A
86201FL60A
86201FL61A
86471AL65A
86471AL66A
86431AL65A
86431AL66A
6.5-Inch Display Audio (BASE)
86431AL61A
NAVIGATION (HIGH ONLY)
86271CA670
STEP 1- Verify the currently installed Software Version ID using the following steps:
•
After starting the engine, from the HOME screen, touch “Settings”.
•
From the Settings > General screen, scroll down to and then touch “System Information”.
Continued...
Bulletin Number: 15-211-17R; Revised 11/13/23
Page 4 of 22
•
Confirm the current Software Version ID. If the Current Version is Rel_A2.22.10.20, Rel_
A2.22.39.20, or Rel_A2.23.10.20 STOP as this latest update has already been installed.
Please note: Image below is for example purposes only. It may not reflect latest software
version(s) available.
STEP 2- Prepare the USB:
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an
operating system.
•
Make sure the USB flash drive contains
no other files.
•
Right click on the corresponding
“Removable Disk”.
•
Select “Format”.
•
From the File System drop-down menu,
select “NTFS”
•
Check the “Quick Format” box (if not
already done).
•
Click on “Start” to format the USB flash
drive.
STEP 3The files are available for download on Subarunet (see “A” below).
The applicable reprogramming files have also been sent directly to retailers by Nuspire in the same
way a Select Monitor Update would be pushed out. (see “B” below).
Follow “A” when using files downloaded from Subarunet.
Follow “B” when using the files sent directly to the SDS notebook from Nuspire.
Continued...
Bulletin Number: 15-211-17R; Revised 11/13/23
Page 5 of 22
“A” When using update files downloaded from Subarunet:
Click Here to Access the Downloads for Audio/Navigation Information on Subarunet
IMPORTANT: Files downloaded from Subarunet will be .zip files and must be unzipped before
they can be used.
Using the normal audio / navigation system file update download procedure: Go to Subarunet, select
Service Operations & Technical>>Forms/Downloads>> Gen 3/Harman for Audio/Navi then click
on the applicable Hyperlink to download the file(s) to your SDS Notebook or PC:
“BASE-17-18 Impreza-18 Crosstrek-18-Legacy-Outback-18-HARMAN AUDIO UPDATE-AUGUST 2022”
“MID-17-18 Impreza-18 Crosstrek-18-Legacy-Outback-18-HARMAN AUDIO UPDATE-AUGUST 2022”
“HIGH-17-18 Impreza-18 Crosstrek-18-Legacy-Outback-18-BRZ-HARMAN AUDIO UPDATE-AUGUST 2022”
•
Go to Downloads.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Once the files have been downloaded from Subarunet, click on the Downloads folder and then
sort by Date Modified to bring the most recent files to the top of the list.
•
Open / display the contents of File folder, for example (BASE-17-18 Impreza-18 Crosstrek18-Legacy-Outback-18-HARMAN AUDIO UPDATE-JUNE 2020).
•
Click on “Extract All Files”.
•
From the dialog box, browse to My Documents then click on “Extract”.
•
Double-click on the required file (for this example, select the file entitled “BASE-17-18
Impreza-18 Crosstrek-18-Legacy-Outback-18-HARMAN AUDIO UPDATE-JUNE 2020”).
•
Copy ONLY the “update” folder then paste (or click / drag) it to the “clean” USB flash drive
as listed (Removable Disk) in the directory.
•
To avoid confusion, label the flash drive with the file contents (e.g. BASE 3.0, MID 3.0 or
HIGH 3.0).
•
Go to Step 4.
Continued...
Bulletin Number: 15-211-17R; Revised 11/13/23
Page 6 of 22
“B” When using update files sent directly from Nuspire:
•
Go to My Documents on the GUI screen to display the list of available update files shown
below.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Sort by Date Modified to bring the most recent files to the top of the list. The folder is named:
_Harman Audio-Navi Update Files.
•
Double-click on the required folder (for this example, select the folder entitled “BASE”),
then double-click on folder name “SystemOnly” to get to folder “update”. It will display as
shown.
•
Select the update folder and either copy / paste or click / drag it to the USB flash drive.
NOTE: Do not copy the entire “BASE …” File folder. Copy ONLY the File folder named
“update” to the flash drive
•
Once the folder named “update” is loaded onto the USB flash drive, right click on the drive
and select “Eject”.
•
Remove the USB flash drive after the prompt appears that says “Safe to Remove Hardware”.
•
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-211-17R
Replacement Service Bulletin Number:
MFR Communication Date: 2023-11-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-07-08 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.