SERVICE ADVISORY
Release Date: November 27, 2023
Expiration Date: December 31, 2024

Communication #: TSA-23-01

SLI

Model Year(s): 2020-2023

— Confidential and Proprietary —

VERSION: R01 (November 27, 2023)
IMPORTANT
If you are working with a printed copy, please verify you have the most current version of this document.

SUBJECT: BRAKE PRESSURE SWITCH UPDATE
PURPOSE
Polaris has identified that some Model Year 2020+ Slingshot vehicles may exhibit a brake warning light and a shift to neutral
condition on AutoDrive equipped vehicles when coming to a stop as a result of a faulty brake pressure switch. Fault codes
commonly associated with these symptoms are C2144 (SPN 2584) and P150A (SPN 520275).
Starting in Model Year 2024, Slingshot will use a new single switch configuration. Polaris has released a single brake
pressure switch service kit that is compatible to retrofit prior model years. This Service Advisory provides instruction to
update vehicles with the new single switch service kit in the event of a brake pressure switch failure.

AFFECTED MODELS
MODEL YEAR

MODELS

2020-2023

All Slingshot Models

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-23-01 (R01)

© 2023 Polaris Inc.

Page 1 of 5

WARRANTY CLAIM INFORMATION
2020-2023 SLINGSHOT
Advisory #

TSA-23-01

Claim Type

SA (Service Advisory)

Labor Allowance

1.1 hours (66 minutes)

Part Number / Description

2212095 (QTY 1) K-SLG,BPS,4K,REPLACE

Parts Availability

Available to order

University of Polaris Video Training
Required

NO

Claim Submission:
• US / Canada Dealers: On DEX, go to Service and Warranty > Warranty Claim and Extended Coverage > Start a New
Warranty Claim. Select Service Advisory> Enter the VIN / PIN and Retrieve Registration. Select TSA-23-01 and Send
Claim.
• International Dealers: On iDEX, go to Service and Warranty> Warranty Claims>Start a New Warranty Claim. Select
Service Advisory> Enter the VIN / PIN and Retrieve Registration. Select TSA-23-01 and Send Claim

COVERAGE PERIOD
Coverage will begin on November 27, 2023. Coverage will expire on December 31, 2024.

PARTS RETURN / DISPOSAL INFORMATION
Under no circumstances shall the parts removed be re-used, sold, or re-purposed for another application. It is your
dealership / distributor’s responsibility to make sure every part replaced (related to this communication) is taken out of
circulation and disposed of properly or returned to Polaris (if required).

FEEDBACK FORM
A feedback form has been created for the technician to provide Polaris with an overall
satisfaction rating for the instructions, provide comments on your experience or upload
pictures/video. The form is viewable on mobile devices by scanning the QR code or on a
PC by clicking HERE.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-23-01 (R01)

© 2023 Polaris Inc.

Page 2 of 5

REPAIR PROCEDURE

SINGLE 4K OHM SWITCH CONFIGURATION

TOOLS REQUIRED
• Safety Glasses
• Digital Wrench®
• Drain Pan
• Flashlight
• Mity Vac™: PN 2870975 or similar
• Socket Set, Metric
• Torque Wrench

IDENTIFYING BRAKE PRESSURE
SWITCHES

This orientation uses a single 4k ohm brake pressure
switch w, a banjo bolt e, and a wire harness jumping cap
r placed on the unused harness connector.

DUAL 2K OHM SWITCH CONFIGURATION

TESTING THE SWITCH
When the brake lever is disengaged, the switch will have a
resistance of 4k ohm and a total resistance of 4k ohms
across the circuit.
When the brake pedal is pressed, the switch will have a
total resistance of