Technical Service Bulletin
01 MIL on - DTC P060C00 is stored in the ECM
01 23 93 2068506/2 November 16, 2023. Supersedes Technical Service Bulletin Group 01 number 22-30 dated
December 5, 2022 for reasons listed below.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

RS Q8

2020 – 2021

All

Not Applicable

Condition
REVISION HISTORY
Revision Date

Purpose

2

Revised header (Added MY 2021 RS Q8)

-

Revised Service (Updated statement, included software information for MY 2021)
Revised Warranty (Updated Labor Operations)
Revised Additional information (Updated referenced bulletins)
1

12/05/2022 Initial publication

Customer states:
• The MIL is illuminated.
Workshop findings:
The following DTC may be stored in the engine control module ECM, J623 (address word):
• DTC P060C00 (Internal Control Module Main Processor Performance) with symptom code 30924.

Technical Background
This is a rare occurrence and is caused by the sensitivity of diagnostics software in the ECM, J623 (address word
0001).

Production Solution
New software in the ECM, J623 (address word 0001) addressed the condition.

Service
This TSB replaces Pending Service Solution (PSS) TSB 2069881: PSS 01 MIL/ EPC light on DTC P060C00 is
stored in ECM.
Please refer to (PSS) TSB 2069882: 01 DTC P060C00 is stored in the ECM for MY22 RS Q8 vehicles.
© 2023 Audi of America, Inc.
Internal

Page 1 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Model Old Software Part
Number

Old Software
Version

New Software Part
Number

New Software
Version

(or higher)

(or higher)

SVM Code
Input

RSQ8 4M8907557B

0003

4M8907557B

0004

01A282

RSQ8 4M8907557F

0001

4M8907557F

0002

01A255

Warranty
Claim Type:

• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside any warranty, this Technical Service Bulletin is
informational only.

Service Number:

2470

Damage Code:

0039

Labor Operations:

Software Update (Includes checking for DTCs) 0151 0000

Time stated on the
diagnostic protocol
(Max 50 TU)

Diagnostic Time:

GFF

0150 0000

Max 15 TU

Road test prior to the service procedure

No allowance

0 TU

Road test after the service procedure

No allowance

0 TU

Claim Comment:

As per TSB 2068506/2

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.

Required Parts and Tools
Tool Number

Tool Description

VAS 6160/VAS 6150

VAS tester with the current version of ODIS (Windows 10)

© 2023 Audi of America, Inc.
Internal

Page 2 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2068506) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.

© 2023 Audi of America, Inc.
Internal

Page 3 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.