NHTSA ID Number: 10244611
Manufacturer Communication Number: Circular 60G2
TSB/Document Date: 2023-11-06
Summary
Vehicles included in this service action do not have the remote window opening/closing feature enabled.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular 60G2
Replacement Service Bulletin Number:
MFR Communication Date: 2023-10-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Service Action
Code: 60G2
Subject
Document History
Affected Vehicles
Sunroof Control Unit Software
Date
10/24/2023
Country
USA
USA
USA
CAN
CAN
Summary
Original publication
Beginning
Ending
Model Year Model Year
2022
2024
2023
2024
2022
2024
2022
2024
2023
2023
Vehicle
Vehicle Count
A3 SEDAN
RS3 SEDAN
S3 SEDAN
A3 SEDAN
S3 SEDAN
828
188
99
52
4
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
Problem Description
Corrective Action
Code Visibility
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Vehicles included in this service action do not have the remote window opening/closing feature
enabled.
Update vehicle software to enable the remote window opening/closing feature.
On or about October 24, 2023, the campaign code will be applied to affected vehicles.
Owner Notification
Owner notification will take place in November 2023. Owner letter examples are included in this
bulletin for your reference.
Campaign Expiration
Date
This campaign expires on October 24, 2028. Work must be performed on or before this date
to be eligible for payment. Keep this expiration date in mind when scheduling customers for this
action. If a customer wishes to have this work performed after the expiration date, your
dealerships normal costs associated with this work will apply.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 1 of 8
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit the request through Audi
Warranty Online under the Campaigns/Update option.
Canada dealers: Upload the repair order [signed by customer] to Audi
WIN/Operations/Campaign Closure.
Service Number
60G2
Damage Code
0099
Parts Vendor Code
Claim Type
002
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Criteria I.D.
Mark labor as causal
Do not claim wash/loaner under this action
8Y
LABOR
Labor Op
Time Units
Description
2706 89 50
SEE ELSA
Connect battery charger
0151 00 00
Time stated on
diagnostic protocol
Update software parameters via SVM
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 2 of 8
Customer Letter Example (USA)
This notice applies to your vehicle: ,
Subject: Service Action 60G2 - Sunroof Control Unit Software
Dear Audi
Owner,
As part of Audi
’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a service
action on certain 2022-2024 model year Audi
vehicles. Our records show that you are the owner of a vehicle affected by
this action.
What is the issue?
Vehicles included in this service action do not have the remote window opening/closing
feature enabled.
What will we do?
Your authorized Audi
dealer will update the vehicle software to enable the remote window
opening/closing feature. This work will take about an hour to complete and will be performed
for you free of charge.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi
dealer as
soon as possible to schedule this work. Please keep in mind that your dealer may need
additional time for the preparation of the work, as well as to accommodate their daily
workshop schedule. For your convenience, you can also visit www.audiusa.com and click
on the “Find a Dealer” link to locate a dealer near you and schedule this service.
This service action will be available for you free of charge only until October 24, 2028. If
you wish to have this service performed after that date, your dealer’s normal costs
associated with this repair will apply.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt.
If you have changed your address or sold the vehicle, please fill out the enclosed prepaid
Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Audi
dealer fails or is unable to complete this work free of charge within
a reasonable time, please contact Audi
Customer Experience at 1-800-253-2834 or via our
“Contact Us” page at www.audiusa.com.
Checking your vehicle
for open Recalls and
Service Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign,
please visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter
your Vehicle Identification Number (VIN).
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Audi
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 3 of 8
Customer Letter Example (Canada)
This notice applies to your vehicle: ,
Subject: Service Action 60G2 - Sunroof Control Unit Software
Dear Audi
Owner,
As part of Audi
’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a
service action on certain 2022-2024 model year Audi
vehicles. Our records show that you are the owner of a vehicle
affected by this action.
What is the issue?
Vehicles included in this service action do not have the remote window opening/closing
feature enabled.
What will we do?
Your authorized Audi
dealer will update the vehicle software to enable the remote window
opening/closing feature. This work will take about an hour to complete and will be performed
for you free of charge.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi
dealer
as soon as possible to schedule this work. Please keep in mind that your dealer may
need additional time for the preparation of the work, as well as to accommodate their
daily workshop schedule.
This service action will be available for you free of charge only until October 24, 2028.
If you wish to have this service performed after that date, your dealer’s normal costs
associated with this repair will apply.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the
enclosed prepaid Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Audi
dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Audi
Customer Relations Monday through
Friday from 8AM to 8PM EST at 1-800-822-2834 or via our “Contact Audi
Canada”
page at www.audi.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 4 of 8
Required Tools
Battery Tester/Charger
Diagnostic Tester
-VAS5908-
-VAS6150X/VAS6160X-
(or equivalent charger with
a current rating of at least
90A)
(or equivalent)
Repair Instruction
Section A - Check for Previous Repair
•
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a
copy with the repair order.
•
Confirm the Campaign/Action is open .
If the status is closed, no further work is required.
•
Note the Applicable Criteria ID for use
in determining the correct work to be done and
corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are
open, they must be performed in order of the Start
date . The oldest should be performed first.
•
All Safety Recalls must be completed prior to
completing this campaign.
Proceed to Section B
NOTE
•
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.
•
Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 5 of 8
Section B – Update Sunroof Parameters via SVM
NOTE
Prior to launching the VAS Diagnostic Tester and starting an update, ensure the following conditions are met;
The ODIS software is completely up to date.
Refer to the “Current ODIS Service Version” circular found in Elsa2Go Service References.
The battery charger is connected to the vehicle battery and remains connected for the duration of the
software update.
•
Battery voltage must remain above 12.5 volts for the duration of the software update. Failure to do
so may cause the update to fail, which could result in damage to the control module. Control modules
damaged by insufficient voltage will not be covered.
The screen saver and power saving settings are off.
•
Failure to do so may result in the tester entering power save mode during the software update, which
could result in damage to the control module.
The VAS Diagnostic Tester is plugged in using the supplied power adapters.
•
Under no circumstances should the tester be used on battery power alone during the software
update. Failure to do so may result in the tester powering off during the update, which could result
in damage to the control module.
Flash process through “Audi
Flashing” not Guided Fault Finding (GFF).
•
DO NOT USE Guided Fault Finding (GFF) to perform this flash. Using GFF will cause the flash to
take longer. Requests for additional time will not be considered.
The VAS Diagnostics Interface MUST ONLY be connected to the tester with a USB cable.
•
Performing a software update using a Bluetooth or WiFi connection increases the risk of losing
connection during the update, which could result in damage to the control module.
It also greatly increases the time required to perform the update. Requests for additional time or
parts will be denied if the GFF log shows the update was performed using Bluetooth or WiFi.
NOTE
•
All campaign software updates must be completed during a single, standalone ODIS Diagnostic Session.
You must fully complete this campaign and send all logs before beginning any other campaigns or
operations.
•
If there are any ODIS “Hot-Fix” patches installed, they must be removed from the scan tool before beginning
this operation. ODIS “Hot-Fix” patches may affect the update process.
WARNING
Radiator Fan(s) may cycle ON high speed during the Update Process! There is a serious risk that personal injury
may result if contact is made with spinning fan blades. Keep hands and all objects away from Radiator Fan(s) during
Update Process!
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 6 of 8
IMPORTANT
To Update-Programming using SVM, review and follow instructions in Technical Bulletin 2011732: Software
Version Management (SVM) Operating Instructions.
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A
warranty claim may not be reimbursed if there is no confirmation response to support the claim.
•
Switch off all consumers, air conditioning, heater blower motor, lights, heated seats, etc.
•
Ensure the latest version of ODIS is downloaded.
•
Ensure diagnostic head is connected to ODIS tester via USB cable.
•
Move selector lever to P.
•
Use operating mode, FLASH.
•
Select “SVM – Code Input”.
•
Enter SVM code 60G1A420 and follow the on screen prompts.
•
When exiting the FLASH program, ensure the diagnostic log is sent to GFF
Paperless.
Proceed to Section C
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 7 of 8
Section C – Campaign Stamp
•
Once the campaign has been completed, the
technician should stamp the repair order.
•
Stamps are available for ordering through the
Compliance Label Ordering Portal (item#
AUD4927ENG or AUD4927FRE).
Item#: AUD4927ENG
OR
Item # AUD4927FRE
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2023 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
60G2 Page 8 of 8
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge
/Jeep
/Fiat
2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- Topfix AI Assistant: Covers 5 million plus fault codes and delivers instant causes, symptoms, and repair guidance with professional wiring diagrams for each code.Slashes diagnostic time, boosts first-time fix accuracy, and increases shop revenue
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary.
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API




