September 2023
Dealer Service Instructions for:

Emissions Recall 06A
VECI Label
Remedy Available
2014-2015, 2017 & 2019-2022 DJ Cab Chassis
2014-2015, 2017 & 2019-2022 D2 Cab Chassis
NOTE: This recall applies only to the above vehicles equipped with a 6.4L engine,
and sales code XBC (delete pickup box).

IMPORTANT: Some of the involved vehicles may be in Dealer vehicle
inventory. Dealers should complete this recall service on these vehicles before
retail delivery. Involved vehicles can be determined by using the VIP inquiry
process.

Subject
The Vehicle Emission Control Information (VECI) label on about 8,430 of the
above vehicles may have either an overstated weight or missing complete vehicle
information (GVWR, Curb Weight, and Frontal Area). This label information is
required by regulation.

© Copyright 2023, FCA US LLC, All Rights Reserved (djt)

Emissions Recall 06A – VECI Label

Page 2

Repair
A new VECI label must be installed.
New VECI labels are being mailed directly to all vehicle owners known to FCA
with the Owner Notification letter for this campaign. The owner may install the
label themselves or, if preferred, to arrange for dealer installation of the ownersupplied label without charge. To place an order for a lost label or for any unsold
vehicles, use the information below.

Parts Information
Part Number

Description

47480055AB

Label, VECI

-

2014 DJ (ESA)

47480028AB

Label, VECI

-

2014 DJ (EZC)

47480037AB

Label, VECI

-

2014 D2

47480155AB

Label, VECI

-

2015 DJ

47480152AB

Label, VECI

-

2015 D2

47480875AB

Label, VECI

-

2017 DJ

47480879AB

Label, VECI

-

2017 D2

68406487AB

Label, VECI

-

2019 D2

68470433AB

Label, VECI

-

2020 D2

68470450AB

Label, VECI

-

2021 D2

68495610AB

Label, VECI

-

2022 DJ

68470467AB

Label, VECI

-

2022 D2

Emissions Recall 06A – VECI Label

Parts Return
No parts return required for this campaign.

Special Tools
The following special tools are required to perform this repair:
➢ NPN
➢ NPN

Heat gun or equivilant
Plastic blade tool or trim stick

Page 3

Emissions Recall 06A – VECI Label

Page 4

Service Procedure
Remove and apply the VECI label by following the procedure below:
1. Raise the hood and support it with the prop rod if equipped.
2. Locate the original VECI label on the underside of the hood (Figure 1).

(Figure 1)
3. Use a heat gun or equivalent to soften the VECI label adhesive (Figure 1).

CAUTION: The heat source must be positioned far enough away from the
painted surface to avoid damage to the clear coat.

Emissions Recall 06A – VECI Label

Page 5

Service Procedure [Continued]
4. Use a thin plastic or rubber type tool to begin lifting a corner of the VECI label
(Figure 2).
PLASTIC TYPE TOOL
OR TRIM STICK

Figure 2 – Removing Label
5. Peel the VECI label slowly at a 45-degree angle to remove.
CAUTION: Do not at any time “scratch” or “scrape” at the adhesive. Care
is to be taken so that the substrate underneath the VECI label is not marred
in any manner.
6. Using isopropyl alcohol and a clean cloth, remove all adhesive residue from the
hood surface where the VECI label was applied. Allow the alcohol to evaporate
before applying the new VECI label.
7. Remove the NEW VECI label from the paper backing.
8. Apply the NEW VECI label to the underside of the hood surface, in the original
position, with the same text orientation.
9. Apply pressure to the entire surface of the VECI label with firm overlapping
strokes removing all wrinkles and air bubbles. Using a tool such as a squeegee is
allowed.
10. Reposition the hood prop in its holding location and close the hood.
11. Return the vehicle to the customer.

Emissions Recall 06A – VECI Label

Page 6

Complete Proof of Correction Form for California Residents
This recall is subject to the State of California Registration
Renewal/Emissions Recall Enforcement Program. Complete a Vehicle
Emission Recall Proof of Correction Form (Form No. 81-016-1053) and supply
it to vehicle owners residing in the state of California for proof that this recall
has been performed when they renew the vehicle registration.
Process Steps to obtain the California Proof of Correction form:
a. Access the “DealerCONNECT” website.
b. Select the “Service” tab.
c. Under the “Publications” heading, select the “ePublishing” link.
d. Sign in using your Dealer Code and Password.
e. Select the “Proof of Correction form”.

Completion Reporting and Reimbursement
Claims for vehicles that have been serviced must be submitted on the
DealerCONNECT Claim Entry Screen located on the Service tab. Claims paid will
be used by FCA to record recall service completions and provide dealer payments.
Use one of the following labor operation numbers and time allowances:
Labor Operation
Number
Replace VECI label

25-06-A1-82

Time
Allowance
0.2 hours

If applicable, add the cost of the recall parts package plus applicable dealer allowance
to your claim.
NOTE: See the Warranty Administration Manual, Recall Claim Processing Section,
for complete recall claim processing instructions.

Emissions Recall 06A – VECI Label

Page 7

Dealer Notification
To view this notification on DealerCONNECT, select “Global Recall System” on the
Service tab, then click on the description of this notification.

Owner Notification and Service Scheduling
All involved vehicle owners known to FCA are being notified of the service
requirement by first class mail. They are requested to schedule appointments for this
service with their dealers. A generic copy of the owner letter is attached.

Vehicle Lists, Global Recall System, VIP and Dealer Follow Up
All involved vehicles have been entered into the DealerCONNECT Global Recall
System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry as needed.
GRS provides involved dealers with an updated VIN list of their incomplete vehicles.
The owner’s name, address and phone number are listed if known. Completed
vehicles are removed from GRS within several days of repair claim submission.
To use this system, click on the “Service” tab and then click on “Global Recall
System.” Your dealer’s VIN list for each recall displayed can be sorted by: those
vehicles that were unsold at recall launch, those with a phone number, city, zip code,
or VIN sequence.
Dealers must perform this repair on all unsold vehicles before retail delivery.
Dealers should also use the VIN list to follow up with all owners to schedule
appointments for this repair.
Recall VIN lists may contain confidential, restricted owner name and address information that was
obtained from the Department of Motor Vehicles of various states. Use of this information is
permitted for this recall only and is strictly prohibited from all other use.

Additional Information
If you have any questions or need assistance in completing this action, please contact
your Service and Parts District Manager.
Customer Services / Field Operations
FCA US LLC

This notice applies to your vehicle,

[Model Year and Model]

IMPORTANT EMISSIONS RECALL

VIN XXXXXXXXXXXXXXXXX

VECI Label

06A
Dear [Name],

LOGO
VEHICLE PICTURE

YOUR SCHEDULING OPTIONS
1. RECOMMENDED OPTION
Call your authorized Chrysler /
Dodge / Jeep® / RAM Dealership.
2. Call the FCA Recall Assistance
Center at 1-800-853-1403. An
agent can confirm part availability
and help schedule an appointment
3. Visit recalls.mopar.com, scan the
QR code below, or download the
Mopar Owner’s Companion App.

QR Code

FCA US LLC has determined that incorrect vehicle emission control information (VECI)
labels were installed on certain [2014-2015, 2017 & 2019-2022 DJ Cab Chassis and 20142015, 2017 & 2019-2022 D2 Cab Chassis] vehicles equipped with a 6.4L engine and sales
code XBC (delete pickup box).
WHY DOES MY VEHICLE NEED REPAIRS?
The VECI label on your vehicle [1] may have either an overstated weight or missing
complete vehicle information (GVWR, Curb Weight, and Frontal Area). This label
information is required by regulation.
HOW DO I RESOLVE THIS IMPORTANT EMISSIONS ISSUE?
You may choose to apply the enclosed VECI label using the instruction as described on the
enclosed instructions letter, understanding the original label MUST be removed. Or if you
prefer not to install the label yourself, simply contact your dealer to schedule a service
appointment. The label installation is expected to take approximately one hour. However,
additional time may be necessary depending on service schedules. This service will be provided
free of charge. Please bring the enclosed VECI label and this letter with you to your dealer.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you
may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [2]
Once we receive and verify the required documents, reimbursement will be sent to you within
60 days. If you have had previous repairs performed and/or already received reimbursement,
you may still need to have the recall repair performed.
We apologize for any inconvenience, but are sincerely concerned about your satisfaction. Thank
you for your attention to this important matter.

Get access to recall notifications, locate
your nearest dealer, and more through
this website or Mopar Owner’s
Companion App. You will be asked to
provide your Vehicle Identification
Number (VIN) to protect and verify
your identity. The last eight characters
of your VIN are provided above.
DEALERSHIP INSTRUCTIONS
Please reference Emissions Recall
06A

Customer Assistance/Field Operations
FCA US LLC

Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371

[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.
[2] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 21-8004,
Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.

Owner Instructions
Apply the VECI label by following the procedure below:

NOTE: Original label MUST be removed from the vehicle.

1. Raise the hood and support it with the prop rod if equipped.
2. Locate the original VECI label on the underside of the hood (Figure 1).
3. Use a heat gun or hair dryer to soften the VECI label adhesive (Figure 1).

Figure 1 – Label Removal

CAUTION: The heat source must be positioned far enough away from the painted
surface to avoid damage to the clear coat.

4. Use a thin plastic or rubber type tool to begin lifting a corner of the VECI label (Figure 2).
PLASTIC TYPE TOOL OR
TRIM STICK

Figure 2 – Removing Label

5. Peel the VECI label slowly at a 45-degree angle to remove.
CAUTION: Do not at any time “scratch” or “scrape” at the adhesive. Care is to be taken so
that the substrate underneath the VECI label is not marred in any manner.
6. Using isopropyl alcohol and a clean cloth, remove all adhesive residue from the hood surface
where the VECI label was applied. Allow the alcohol to evaporate before applying the new
VECI label.
7. Remove the NEW VECI label from the paper backing.
8. Apply the NEW VECI label to the underside of the hood surface, in the original position, with
the same text orientation.
9. Apply pressure to the entire surface of the VECI label with firm overlapping strokes
removing all wrinkles and air bubbles. Using a tool such as a squeegee is allowed.
10. Reposition the hood prop in its holding location and close the hood.