DEALER LETTER Service Bulletin/Repair Instructions

REPAIR INSTRUCTIONS
SUBJECT

In cabin fuel smell when vehicle is idling or being driven.

AFFECTED VEHICLES

All 2022-2024 Outlander (U.S. and Puerto Rico only)

PURPOSE

This document provides instructions on how to resolve an in cabin fuel smell detected

while the vehicle is idling or being driven and should be performed on a customer

complaint basis.

BACKGROUND

Fuel evaporation may cause a fuel smell to be present inside the vehicle cabin while the

vehicle is idling or being driven. This is a result of the canister vent positioned on the sidemember which is connected to the vehicle cabin. The concern is resolved by changing the

structure of the vent pipe and positioning it to the rear wheel house.

PROCEDURE

Follow the steps below to replace the TUBE COMPL - FILLER, referring to the applicable Service

manual as necessary.

1. Remove rear wheel house protector.

a. Refer to service manual: Body Exterior, Doors, Roof and Vehicle Security -Exterior,

Front Fender Protector/Rear Wheel House Protector.

2. Remove rear suspension.

a. Refer to service manual: Suspension - Rear Suspension, Rear Suspension Member

and the parts chart (page 11) for replacement of non-reusable parts.
8/2/2023
1 of 11
(5333/TSL2307018)
3. Remove vent pipe installed on the side member and remove vent hose from the vent tube

assembly (figure 1).
4. Replace TUBE COMPL - FILLER (figure 2).

a. Refer to service manual: Engine - Fuel System > Fuel Tank.

b. It is not necessary to remove the fuel tank when replacing the filler tube.

c. Tightening position and torque of filler tube COMPL may be found in the service

manual.

d. Connect TUBE COMPL - FILLER and filler hose (figure 3).

e. Connect TUBE COMPL - FILLER and vent tube (figure 3).

f. Make sure the yellow marking of vent hose is facing downward (figure 3).

g. Refer to TSB-23-13-005 for further information on the removal procedure for

the Fuel Filler Tube.
8/2/2023
2 of 11
(5333/TSL2307018)
REAR AXLE
16
REAR DRIVE SHAFT

Exploded View
Exploded View
SEC. 396
39234W010P
DF100AGEAA

DF100AGEAA00USA

Circular clip
Dust shield
Housing
Snap ring
Spider assembly
Boot band
Boot
Drive shaft
: Wheel side
: Fill Mitsubishi Motors genuine grease or an equivalent.

: Always replace after every disassembly.
8/2/2023
3 of 11
(5333/TSL2307018)
5
EXHAUST SYSTEM

REMOVAL AND INSTALLATION

EXHAUST SYSTEM

Exploded View
Exploded View

2WD

SEC. 200•208

1575A232
6.5 (0.66, 58)
5.8 (0.59, 51)
21.0 (2.1, 15)
21.0 (2.1, 15)
5.8 (0.59, 51)
50.0 (5.1, 37)
21.0 (2.1, 15)
10.0 (1, 89)
45.0 (4.6, 33)
CF100A1GAA00USA

Gasket
Stud bolt
Exhaust front tube
Heat insulator (upper)
Mounting rubber
Heated oxygen sensor 2
Heat insulator (lower)
Gasket
Mounting rubber
Main muffler
Mounting rubber
Mounting rubber
To exhaust manifold. Refer to Exploded View.

: Always replace after every disassembly.

: Nm (kg-m, in-lb)

: N⋅m (kg-m, ft-lb)

: Indicates that the part is connected at points with same symbol in actual vehicle.
8/2/2023
4 of 11
(5333/TSL2307018)
DRIVELINE
122

BACKLASH OF CENTER BEARING
Move the shaft near center bearing up and down and from side to side (axial direction of shaft and right angle to shaft) to check that the bearing has no backlash. If the bearing has a malfunction,

remove propeller shaft and perform inspection.
CF100ABEAA00USA
APPEARANCE AND NOISE

•
Check the propeller shaft tube surface for dents or cracks. If malfunction is detected, replace propeller shaft assembly.
•
If center bearing is noisy or damaged, replace propeller shaft assembly.
VIBRATION

If vibration is present at high speed, adjust the propeller shaft phase first.

1.Check the propeller shaft for bend and damage. If damaged, replace propeller shaft assembly.

2.Perform a cruise test drive to check the propeller shaft for runout. If vibration occurs, separate propeller shaft at final drive companion flange; then change the phase between companion flange and

propeller shaft by the one bolt hole at a time and install propeller shaft.

3.If vibration is still detected, measure propeller shaft runout after removing it. Refer to Inspection.
REMOVAL AND INSTALLATION

REAR PROPELLER SHAFT

Exploded View
Exploded View

3401B263
3401B264
AX000207
3401B265
CF100ABFAA00USA
Propeller shaft assembly
: Vehicle front

: N⋅m (kg-m, ft-lb)

: Always replace after every disassembly.
8/2/2023
5 of 11
(5333/TSL2307018)
REAR AXLE
12
REMOVAL AND INSTALLATION

REAR WHEEL HUB AND HOUSING

Exploded View
Exploded View

SEC. 430
105 (11, 77)
105 (11, 77)
105 (11, 77)
3815B113
125 (13, 92)
3815B105

DF100AGDAA00USA

Axle housing
Bushing
Hub cap
Back plate
Hub bolt
Wheel hub and bearing assembly
Disc rotor
Wheel hub lock nut
Cotter pin
: Vehicle front
: N⋅m (kg-m, ft-lb)

: Always replace after every disassembly.
8/2/2023
6 of 11
(5333/TSL2307018)
15
REAR SUSPENSION

RADIUS ROD

Exploded View
Exploded View

SEC. 431
105 (11, 77)
AX000260

105 (11, 77)

DF100AHWAA00USA

Radius rod
Rear suspension member
Axle housing
: Vehicle front
: N⋅m (kg-m, ft-lb)

: Always replace after every disassembly.

Removal and Installation
Removal and Installation

REMOVAL

1.Remove tires. Refer to Removal and InstallationRemoval & Installation.

2.Remove radius rod
mounting bolts
and nut
.
CF100AHXAA00USA
3.Remove radius rod.

4.Perform inspection after removal. Refer to Inspection.
8/2/2023
7 of 11
(5333/TSL2307018)
REAR SUSPENSION
16

INSTALLATION

Note the following, and install in the reverse order of removal.

•
Perform final tightening of fixing parts at the vehicle installation position (rubber bushing), under unladen conditions with tires on level ground.
•
Perform inspection after installation. Refer to Inspection.

Inspection
Inspection

INSPECTION AFTER REMOVAL

Check radius rod and bushing for deformation, cracks, and other damage. Replace it if necessary.
INSPECTION AFTER INSTALLATION

Check wheel alignment. Refer to Inspection.
FRONT LOWER LINK

Exploded View
Exploded View

SEC. 431
88 (9.0, 65)
AX000260
145 (15, 107)
DF100AHYAA00USA

Rear suspension member
Eccentric disk
Front lower link
Axel housing
Adjusting bolt
: Vehicle front
: N⋅m (kg-m, ft-lb)

: Always replace after every disassembly.
8/2/2023
8 of 11
(5333/TSL2307018)
REAR SUSPENSION
18
REAR LOWER LINK

Exploded View
Exploded View

SEC. 431
88 (9.0, 65)
88 (9.0, 65)
AX000260

DF100AI0AA00USA

Rear suspension member
Adjusting bolt
Eccentric disk
Rear lower link
: Vehicle front
: N⋅m (kg-m, ft-lb)

: Always replace after every disassembly.
8/2/2023
9 of 11
(5333/TSL2307018)
REAR SUSPENSION
20
REAR STABILIZER

Exploded View
Exploded View

SEC. 431

62 (6.3, 46)
164 (17, 121)
AX000270

164 (17, 121)

DF100AI2AA00USA

Rear suspension arm
Rear stabilizer bar
Rear stabilizer clamp
Rear stabilizer connecting rod
Rear stabilizer bushing
: Vehicle front
: N⋅m (kg-m, ft-lb)

: Always replace after every disassembly.
8/2/2023
10 of 11
(5333/TSL2307018)
PARTS INFORMATION

Part Name

TUBE COMPL－FILLER
Part No.

17220W040P
Quantity

1
Remarks

--
(Non-reusable parts)

Part Name

BOLT,PROPELLER SHAFT

NUT,PROPELLER SHAFT

BOLT,PROPELLER SHAFT

NUT,PROPELLER SHAFT

PIN,RR AXLE DRIVE SHAFT

NUT,RR AXLE DRIVE SHAFT

CLIP,RR AXLE DRIVE SHAFT

GASKET,CATALYTIC

CONVERTER
Part No.

3401B265

AX000207

3401B264

3401B263

3815B105

3815B113

39234W010P

1575A232
NUT,INDEP RR SUSP ARM
AX000260
NUT,INDEP RR SUSP ARM
AX000270
Quantity

4

2

4

4

2

2

2
2WD/4WD

4WD

4WD

4WD

4WD

4WD

4WD

4WD
Remarks

For Propeller shaft

For Propeller shaft

For Propeller shaft

For Propeller shaft

For Rear axle drive shaft

For Rear axle drive shaft

For Rear axle drive shaft
1
2WD/4WD
For Exhaust pipe
2

4

4

4
2WD/4WD

2WD/4WD

2WD/4WD

2WD/4WD
For Rear suspension arm

For Rear suspension assist link

For Rear suspension lower arm

For Rear suspension arm
WARRANTY

This bulletin is supplied as technical information only and is not an authorization to

repair. If an affected vehicle is reported with the described condition, diagnose the

condition, repair as described in this bulletin, and submit a normal warranty claim

using the information below.

LABOR

OPERATION

QUANTITY

REMARKS

LABOR OP CODE

TIME

Replacement

1

4.0H

2WD

173100LM

Replacement

1

5.3H

4WD

173100LN
8/2/2023
11 of 11
(5333/TSL2307018)

SaleBestseller No. 1

ANCEL X7HD 10'' Heavy Duty Truck Scanner, Semi Trucks Full System Diagnostic Tool, Bidirectional Diesel Scan Tool with DPF, ECU Coding, 40+ Reset for Cummins, Detroit, Caterpillar, Volvo, Paccar etc

🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc

SaleBestseller No. 2

ANCEL Heavy Duty Truck Scanner HD601 All System Diesel Diagnostic Scan Tool fits for Cummins, Detroit, Freightliner, International, Paccar, Check Engine for Truck & Car 2 in 1 Code Reader

【Extensive Compatibility】HD601 heavy duty truck scanner supports 12V & 24V commercial vehicles and all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Caterpillar, Freightliner, International, Peterbilt, Ford Heavy Truck, Class 4-Class 8 trucks, etc. It also supports engine diagnosis on most cars, minivans, light trucks and pickups
【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Caterpillar, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money. Note: Only heavy truck vehicles that comply with the above protocol can diagnose the entire system
【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand code definitions and helps you locate vehicle faults. Note: This device cannot directly solve the fault. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work

SaleBestseller No. 3

NEXAS Heavy Duty Truck Scanner NL102 Full System Diesel Truck Scan Tool for Cummins, Isuzu, Freightliner, Caterpillar, Detroit, Peterbilt, 2-in-1 Code Reader Read & Clear Fault Codes for Truck & Car

Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
Wide Compatibility - Friendly Reminder: To avoid compatibility issues, please confirm with us via Amazon Messages before purchasing. This heavy duty truck scanner is compatible with all heavy-duty trucks and semi that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, ISUZU etc. Equipped with 6-pin, 9-pin, and 16-pin connectors for versatile device compatibility, ensuring stable plug-and-play connections.
Save Hundreds of Money for All Heavy Duty Trucks – This diesel diagnostic scanner supports accurate full-system scans for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). It can read and clear trouble codes across a range of vehicle systems, including the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The truck scanner communicates directly with your truck's computer to provide real-time data stream analysis, letting you pinpoint issues with precision. This cuts down on waste from unnecessary part replacements, saving you time and hundreds or even thousands of dollars.
All OBD2 Functions + Battery Health Monitoring – Unlike many obd2 scanners on the market that only cover partial OBD2 features, ours gives you full OBD2 capability: read & clear codes, live data, freeze frame data, I/M readiness checks, EVAP tests, on-board monitor, O2 sensor tests, vehicle info, and DTC lookup. That means more detailed insights for pros and DIYers alike. The NL102 isn't just a code scanner – it's a battery saver. Regularly check your car's battery health, and catch issues before it dies completely. No more unexpected no-starts in the driveway or on the road. It diagnoses battery condition accurately, helping you avoid costly last-minute repairs.
Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor