07-213-22R Service Bulletin/Repair Instructions

ATTENTION:

GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All

Service Personnel

Should Read and

Initial in the boxes

provided, right.
SERVICE MANAGER
q
© 2022 Subaru of America, Inc. All rights reserved.
SERVICE BULLETIN

APPLICABILITY:
SUBJECT:
2020-23MY Legacy & Outback

2023MY Ascent
NUMBER: 07-213-22R
Genuine Battery Replacement
REVISED: 08/10/23
DATE: 11/16/22
INTRODUCTION:

This bulletin announces a new Genuine Subaru Replacement battery for use in applications where

the current SOA821B700 battery is specified. The new replacement battery (SOA821B900) has

higher capacity but is also slightly larger dimensionally. When replacing an original equipped battery

(SOA821B700) with the new SOA821B900, additional parts will be required to ensure proper

positioning and secure retention. Please refer to work procedures outlined below.

PART INFORMATION:

REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being

repaired.
Part Description
Part Number
Battery
SOA821B900
Part Description
Part Number
TRAY-BATTERY
821190AN000
ROD-BATTERY FIX
82161SJ000*
HOLDER-BATTERY FIX
82184SG000
* The original rod nut must be retained for reuse.
IMPORTANT NOTE: All the parts listed above

must be ordered through PRIME.
SERVICE PROCEDURE / INFORMATION:

Please review the battery identification, charging, and testing information provided in Service

Bulletin 07-178-21 prior to performing any battery testing and/or charging. ALWAYS confirm the

Midtronics equipment being used has the latest software available.

IMPORTANT: The original battery holder, battery tray, and rear holding rod are to be returned to the

customer.

CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD

RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.

Subaru Service Bulletins are intended for use by professional technicians ONLY. They

are written to inform those technicians of conditions that may occur in some vehicles,

or to provide information that could assist in the proper servicing of the vehicle. Properly

trained technicians have the equipment, tools, safety instructions, and know-how to

do the job correctly and safely. If a condition is described, DO NOT assume that this

Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is

ISO 14001 Compliant

ISO 14001 is the international standard for

excellence in Environmental Management

Systems. Please recycle or dispose of

automotive products in a manner that is friendly

to our environment and in accordance with all

local, state and federal laws and regulations.
Continued...

Bulletin Number: 07-213-22R; Revised: 08/10/23
Page 1 of 4
STEP 1: Refer to the applicable Service Manual and review: General Description > Repair Contents

> Action required before & after Battery Disconnect. Additionally, record any stored seat position(s)

before proceeding. Relearn any seat position memory after work is complete. If the power rear gate

(PRG) height has been customized, that position must also be noted and relearned.

STEP 2: Remove the battery as per the applicable Service Manual: Engine > STARTING/

CHARGING SYSTEMS > Battery > Removal.

STEP 3: Replace the original battery tray with the new part (p.n. 82190AN000).
STEP 4: Install the original battery cover to the new replacement battery. Confirm the bottom of the

cover is aligned flush with the bottom of the battery.
Continued...

Bulletin Number: 07-213-22R; Revised: 08/10/23
Page 2 of 4
STEP 5: Assemble the new battery holder (p.n. 82184SG000), NEW rear holding rod (p.n.

82161SJ000), and the ORIGINAL front holding rod as shown below. The original rod nut can be

transferred to the new rear holding rod.
IMPORTANT: DO NOT discard the original holder and rear rod. These parts are to be returned to

the customer.

STEP 6: Install the battery as per the applicable Service Manual: Engine > STARTING/CHARGING

SYSTEMS > Battery > Installation

STEP 7: Install the battery holder and holding rods on to the battery.

A. Torque the two holding rod mounting nuts to 3.5 N·m (2.6ft-lbs. or 31inch-lbs.).

B. Torque the positive terminal to 6 N·m (4.4ft-lbs. or 53inch-lbs.).

C. Torque the negative terminal to 7.5Nm (5.5ft.-lbs. or 66inch-lbs.).

D. If the battery sensor is removed or disconnected torque to 7.5Nm (5.5ft.-lbs. or 66inchlbs.) while supporting the sensor with the other hand as outlined in the applicable

Service Manual under: STARTING/CHARGING SYSTSEMS > Battery Sensor.

CRITICAL: Confirm the battery holder is center mounted with the battery cables secured and routed

correctly.
Continued...

Bulletin Number: 07-213-22R; Revised: 08/10/23
Page 3 of 4
WARRANTY / CLAIM INFORMATION:

For vehicles within the Basic New Car Limited Warranty period, this repair may be submitted using

the following claim information:

Legacy & Outback Labor Description
Labor Operation #
Labor Time
START-STOP BATTERY TEST & REPLACE
B800-002
0.5
ADD TIME; MOUNTING HARDWARE R&R
C800-055
0.2
Ascent Labor Description
Labor Operation #
Labor Time
ENHANCED FLOODED BATTERY TEST & REPLACE
B800-103
0.5
ADD TIME; MOUNTING HARDWARE R&R
C800-055
0.2
Fail Code

FFF-42
Fail Code

FFI-42
NOTE: A valid battery test code or an authorization with reason Leaking/cracked battery will

be required for Claim submission.
IMPORTANT REMINDERS:

•
SOA strongly discourages the printing and/or local storage of service information as previously

released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 07-213-22R; Revised: 08/10/23
Page 4 of 4

Bestseller No. 1

KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bidirectional Test Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update

OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
Wide Compatibility CANFD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase.
Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis

SaleBestseller No. 2

KINGBOLEN K7 Bidirectional Scan Tool 2026 OBD2 Scanner Bluetooth with Lifetime Updates, No Annual Fees, 31+ Resets, Component Matching, All System Diagnostic, CAN FD, FCA AutoAuth, Crankshaft Relearn

No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase

SaleBestseller No. 3

KINGBOLEN OBD2 Scanner S608, 2026 Bidirectional Scan Tool for ABS/SRS/Transmission/Engine, 9 Resets Oil Brake DPF Bleed Gear Injector Throttle BMS SAS, CAN FD & FCA/Renault SGW, Lifetime Free Update

WHY S608 STANDS OUT:2026 Kingbolen S608 is the only scanner <200 bucks that offers powerful active tests on Engine, ABS, SRS, and Transmission systems. Offers 9 resets,Covers 110+ global brands with a 6.2'' larger touchscreen
KINGBOLEN'S NEW BIDIRECTIONAL SCAN TOOL: As the 2026 upgraded version of S600, our Newest S608 obd2 scanner has the powerful Bi-directional Control on Engine, ABS, SRS, and Transmission systems. It can send commands to the ECUs of actuators for functional tests and work status checks, such as ABS, fuel injectors, adjusting throttle, coolant pumps, EVAP test, fuel trim reset, etc. No more Guesswork. Quickly identify problem components without teardown, get fuss-free results in seconds.
【9 HOT RESET SERVICES CAR SCANNER】Tired of costly mechanic trips for common resets? The Kingbolen S608 obd2 scanner lets you do it yourself, even for beginners—quickly and effortlessly! It offers 9 hot reset functions: Oil/EPB Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Injector Coding, BMS Matching, Throttle Adaptation, Gear Learning. Stop paying mechanics for 5-minute jobs. Save hundreds per year! 🚗*Function vary from vehicle models. reach us to check compatibility firstly!
【4 SYSTEM DIAGNOSTIC TOOL + FULL OBDII FUNCTIONS】Kingbolen S608 is an OBDII scanner and 4 systems diagnostic tool made for home mechanics, DIYers, and professionals. You can access Engine, ABS, SRS, Transmission fault codes, track live data in graphs, and onboard DTC library lookup to find the right troubleshooting procedure, and diagnose with full 10 OBD2 test modes to fix most of emission issues. Give your aging cars routine maintenance to avoid costly repairs, a breakdown, or even a crash.
【NEW CAN FD, FCA/RENAULT SGW, 140+ BRANDS】Kingbolen S608 scanner for car supports 140+ vehicle brands, 100,000+ models, 28 languages and can be used worldwide. S608 stays up-to-date with modern vehicles, allows secure access to 2017+ FCA cars and 2015+ Renault cars (📢*Need to purchase an AutoAuth/Renault account by yourself), and supports the latest CAN-FD protocol for 2019+ GM/Chrysler, enabling 2X faster data transfer and more precise diagnostics. 🚗*Check compatibility before purchase.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor