NHTSA ID Number: 10241792
Manufacturer Communication Number: N222371151-11
TSB/Document Date: 2023-09-05
Summary
Customer Satisfaction. Due to the industry-wide semiconductor shortage, the heat feature on the steering wheel is not functional on certain 2022-2023 model year vehicles listed above, built beginning November 17, 2021. The affected vehicle owners should have been made aware of the condition at sale, and notified that once parts are available, they would be eligible for a no additional cost retrofit to enable the feature. Dealers are to replace the steering wheel assembly.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N222371151-11
Replacement Service Bulletin Number:
MFR Communication Date: 2023-09-05
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STEERING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Customer Satisfaction Program
N222371151 – Heated Steering Wheel Retrofit – Steering Wheel
Replacement Only
Release Date:
Revision Description:
Attention:
Revision:
11
This bulletin has been revised to add “Steps For A Successful Order On Retrofit” into
the parts section. Please discard all previous copies of N222371151.
This program is in effect until August 31, 2026.
Make
Buick![]()
Cadillac![]()
Cadillac![]()
Cadillac![]()
Cadillac![]()
Cadillac![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
GMC![]()
GMC![]()
GMC![]()
GMC![]()
GMC![]()
September 2023
Model
Enclave
CT4
CT5
XT4
XT5
XT6
Blazer
Silverado 1500 LTD
Silverado 2500HD/3500HD
Suburban
Tahoe
Traverse
Acadia
Sierra 1500 Limited
Sierra 2500HD/3500HD
Yukon
Yukon XL
Model Year
From
To
2022
2022
2022
2022
2022
2022
2022
2023
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
2022
RPO
Description
Involved vehicles are marked “Open” on the Investigate Vehicle History screen in GM Global Warranty Management
system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections
and/or repairs.
Condition
Correction
Due to the industry-wide semiconductor shortage, the heat feature on the steering wheel is not
functional on certain 2022-2023 model year vehicles listed above, built beginning November 17,
2021. The affected vehicle owners should have been made aware of the condition at sale, and notified
that once parts are available, they would be eligible for a no additional cost retrofit to enable the
feature.
Dealers are to replace the steering wheel assembly.
Parts – MUST BE ORDERED BY SPAC, PLEASE SEE NOTES BELOW
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Part Name
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Copyright 2023 General Motors
. All Rights Reserved.
Part Number
Displayed in EPC
85128539
85143361
85533770
84997109
84945917
84945918
85551801
85533772
85533780
84994089
84994090
84994093
84945911
85551795
84945914
84678264
84859083
84859084
84859093
Part Number To
Be Ordered
85128539
85143361
85533770
85533782*
87821703
87821704
87821705
85533772
85533780
84994089
84994090
84994093
87821697
87821699
87821700
84859081
84859083
84859084
84859093
Page 1 of 5
Customer Satisfaction Program
N222371151 – Heated Steering Wheel Retrofit – Steering Wheel
Replacement Only
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
1
1
1
1
Steering Wheel
Steering Wheel
Steering Wheel
Steering Wheel
84859097
84859104
84922936
84922937
84946327
84946329
84946331
85544815
84946335
84946337
84946339
84946341
84946343
84946344
84946346
85004120
86792567 or
86825617
85003691
85003699
85003705
85003707
85108334
85108339
85590951
84922937
84946327
84946329
84946331
84946333
84946335
84946337
84946339
84946341
84946343
84946344
84946346
85004120
85580671
85143418
85143422
85003705**
85003707**
* If the steering wheel part number does not populate by VIN in the EPC:
1) Remove the VIN filtering
2) Look for body styles DE69 or DF69
3) Part number 84997109 should populate in the list
4) Part number 85533782 is the correct part number to order
** If the steering wheel part number does not populate by VIN in the EPC for the XT4:
1)
2)
Make sure the Ultra VIN Filter is UNCHECKED
Make sure the VIN Filter is CHECKED
The EPC will be updated in the near future.
Note: Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which Steering Wheel to order.
Do NOT place orders until the customer contacts the dealership to schedule an appointment.
Parts required to complete this recall are to be obtained from General Motors
Customer Care and Aftersales (GMCCA).
Please refer to your “involved vehicles listing” before ordering parts. Parts for this Retrofit will be on Order Writing
control initially and all DRO’s (Daily Replenishment Orders) may cancel. Dealers should place orders CSO (Customer
Special Order) and upgrade to SPAC with a VIN. All orders will be reviewed prior to being filled. All CSO may be
cancelled daily. Only SPAC orders with a valid VIN associated with the vehicle listing will be released while on
the order writing control. Due to order writing control orders will not ship as OVN. Please take this into
consideration in shipping if not coming from your Admin PDC.
Reminder: Parts will be removed from SPRINT, they are non-returnable and may be removed from Retail Inventory
Management (RIM). Dealers should review the affected parts to confirm RIM managed status. Parts may have
quantity limiters in effect.
Steps For A Successful Order on Retrofit:
1.
2.
3.
4.
5.
6.
7.
8.
Validate your VIN is open by checking Investigate Vehicle History (IVH)
Validate what part number is needed for the VIN
Verify that this part for this VIN has not been ordered previously by your dealership
Place a CSO order
Upgrade to a SPAC case immediately following placing CSO
Order will be released once VIN information has been verified
One part per VIN
Use the part on the VIN it was ordered for
Page 2 of 5
Customer Satisfaction Program
N222371151 – Heated Steering Wheel Retrofit – Steering Wheel
Replacement Only
9.
If an order was cancelled and you are unable to determine why, please seek assistance from your District
Manager Aftersales (DMA)
Warranty Information
Labor
Operation
9106623
9106771
Labor
Time
Description
Replace Steering Wheel
XT5
XT6
CT4
CT5
Blazer
Suburban
Tahoe
Acadia
Yukon
Yukon XL
Sierra 1500 Limited
Sierra 2500HD/3500HD
Silverado 1500 LTD
Silverado 2500HD/3500HD
Traverse
Enclave
XT4
Cost of the T50 impact Torx bit (only 1 claim per dealer allowed)
0.4
0.5
0.6
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.4
0.5
0.4
0.4
0.4
0.8
N/A
Trans.
Type
ZFAT
Net
Item
N/A
ZFAT
*
Important: The tool reimbursement labor code, 9106771, must be submitted prior to the submittal of the replacement
labor code 9106623 or the claim will reject. This tool is required for both N222371150 and N222371151. Only one claim
per dealer is allowed for both bulletins. The tool can be reused to perform either bulletin.
* Dealers will be allowed to purchase one ½ inch drive T50 impact Torx bit locally. Submit the actual cost of the T50
impact Torx bit, not to exceed $20.00 USD ($27.06 CAD).
Service Procedure
Tools, Equipment and Materials
•
½ inch drive T50 impact Torx bit*
*Dealers will be allowed to purchase one ½ inch drive T50 impact Torx bit locally.
6298325
Caution: During steering wheel bolt removal, observe the following precautions:
Page 3 of 5
Customer Satisfaction Program
N222371151 – Heated Steering Wheel Retrofit – Steering Wheel
Replacement Only
•
•
•
Do NOT use heat on the steering wheel bolt, steering wheel, or steering column. Using heat could cause damage
to the steering related components.
Do NOT hammer or apply excessive downward force on the steering wheel bolt, steering wheel, or steering
column. Hammering or applying excessive downward force could cause damage to the steering related
components.
Damaged columns due to hammering or excessive downward force can cause a rubbing of the trim pieces
potentially leading to a customer comeback.
Note:
•
•
•
•
1.
Steering wheel bolts installed during manufacturing require high torque efforts to remove.
The ONLY acceptable bit for removing and installing the steering wheel bolt is a T50 Torx bit. Do NOT use any
other size bit or a worn bit.
If a power tool is used to remove the steering wheel bolt, the tool must have a minimum torque rating greater
than 75 NM (55 lb ft) and both the power tool and the T50 Torx bit MUST be positioned perpendicular to the bolt
recess.
Apply appropriate downward force to maintain engagement of bit to bolt recess during bolt removal.
Remove and replace the Steering Wheel. Refer to Steering Wheel Replacement in SI.
Dealer Responsibility
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers’ possession
and subject to this program must be held and inspected/repaired per the service procedure of this bulletin before
customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealertraded, released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System
(CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting
an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified
for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this program at no charge to customers, regardless of mileage, age of vehicle,
or ownership, through August 31, 2026. Customers who have recently purchased vehicles sold from your vehicle
inventory, and for which there is no customer information indicated on the involved vehicle listing, are to be contacted by
the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this
bulletin. A copy of the customer letter is provided in this bulletin for your use in contacting customers. Program followup cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this program enters your vehicle inventory or is in your facility for service
through August 31, 2026, you must take the steps necessary to be sure the program correction has been made before
selling or releasing the vehicle.
Dealer Reports – For USA & Export
For dealers with involved vehicles, a listing has been prepared and will be available through GM GlobalConnect Maxis
Field Action Reports or sent directly to export dealers. The Inventory tab of the dealer reports will contain VINs that
apply to this field action. This information is intended to assist dealers with the PROMPT COMPLETION of these
vehicles. The Customer In-Service tab will contain customer names and addresses from Motor Vehicle Registration
Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete
this field action may be a violation of law in several states.
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for customers whose vehicles are involved in a product program and still within the
warranty coverage period. See General Motors
Service Policies and Procedures Manual for courtesy transportation
program details.
Customer Notification
USA & Canada – General Motors
will notify customers of this program on their vehicle (see copy of customer letter
included with this bulletin).
Export – Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor
Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
GM bulletins are intended for use by professional technicians, NOT a “do-it-yourselfer”. They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 4 of 5
Customer Satisfaction Program
N222371151 – Heated Steering Wheel Retrofit – Steering Wheel
Replacement Only
This notice applies to your vehicle, VIN: ________________________________
Dear General Motors
Customer:
Our records indicate that, at the time you purchased or leased your GM vehicle, the vehicle was not equipped with the
heat feature on the steering wheel assembly due to an industry-wide parts shortage.
We are pleased to inform you that you are now able to schedule an appointment with your GM dealer so they can
replace your steering wheel assembly.
What We Will Do: Your GM dealer will replace the steering wheel assembly. This service will be performed for you at
no charge until August 31, 2026. After that, any applicable warranty will apply.
What You Should Do: We recommend that you contact your GM dealer as soon as possible to schedule an
appointment for this retrofit. By scheduling an appointment, your dealer can order the necessary parts to be available
on your scheduled appointment date.
If you have any questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer
Assistance Center at the number listed below.
For the hearing or speech impaired, please contact our Customer Assistance Center using the Telecommunication
Relay Service by dialing 711 then providing the appropriate Customer Assistance Center number for your vehicle.
Division
Buick![]()
Cadillac![]()
Chevrolet![]()
GMC![]()
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-800-521-7300
1-800-333-4223
1-800-222-1020
1-800-462-8782
1-866-467-9700
1-866-467-9700
1-866-467-9700
Text Telephones (TTY)
711 / 1-800-833-2438
711 / 1-800-833-2438
711 / 1-800-833-2438
711 / 1-800-833-2438
We truly appreciate you taking the time to retrofit your vehicle as we know your time is valuable. We want you to know
that we will do our best, throughout your ownership experience, to ensure that your GM vehicle provides you with many
miles of enjoyable driving.
Neelie O’Connor
Global Executive Director
Customer Experience Operations
N222371151
Page 5 of 5
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS6664
URGENT - DISTRIBUTE IMMEDIATELY
Date:
September 5, 2023
Subject: REVISION: N222371151-11 - Customer Satisfaction Program
Heated Steering Wheel Retrofit – Steering Wheel Replacement Only
Update to Parts Section
Models: 2022 Buick
Enclave
2022 Cadillac
CT4
2022 Cadillac
CT5
2022-2023 Cadillac
XT4
2022 Cadillac
XT5
2022 Cadillac
XT6
2022 Chevrolet
Blazer
2022 Chevrolet
Silverado 1500 LTD
2022 Chevrolet
Silverado 2500HD/3500HD
2022 Chevrolet
Suburban
2022 Chevrolet
Tahoe
2022 Chevrolet
Traverse
2022 GMC
Acadia
2022 GMC
Sierra 1500 Limited
2022 GMC
Sierra 2500HD/3500HD
2022 GMC
Yukon
2022 GMC
Yukon XL
To:
All General Motors
Dealers
This bulletin has been revised to add “Steps For A Successful Order On Retrofit”
into the parts section. Please discard all previous copies of N222371151.
As parts become available for more vehicles involved in this retrofit, and VINs
are moved to an Open status, we will communicate that in an upcoming
message.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM
✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages - 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- 🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- 【Extensive Compatibility】HD601 heavy duty truck scanner supports 12V & 24V commercial vehicles and all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins
, Paccar
, Detroit, Caterpillar
, Freightliner
, International
, Peterbilt
, Ford
Heavy Truck, Class 4-Class 8 trucks, etc. It also supports engine diagnosis on most cars, minivans, light trucks and pickups - 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins
, Caterpillar
, Detroit, Caterpillar
, Maxxforce, Bendix
,Wabash
, Wabaco, Haldex
, Allison, Eaton
heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money. Note: Only heavy truck vehicles that comply with the above protocol can diagnose the entire system - 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand code definitions and helps you locate vehicle faults. Note: This device cannot directly solve the fault. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work
- Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
- Wide Compatibility - Friendly Reminder: To avoid compatibility issues, please confirm with us via Amazon Messages before purchasing. This heavy duty truck scanner is compatible with all heavy-duty trucks and semi that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins
, Detroit, Caterpillar
, Freightliner
, International
, Kenworth
, John Deere, Peterbilt
, Sterling, Mack
, Paccar
, Western Star
, Mercedes-Benz
, Volvo
, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, ISUZU
etc. Equipped with 6-pin, 9-pin, and 16-pin connectors for versatile device compatibility, ensuring stable plug-and-play connections. - Save Hundreds of Money for All Heavy Duty Trucks – This diesel diagnostic scanner supports accurate full-system scans for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). It can read and clear trouble codes across a range of vehicle systems, including the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The truck scanner communicates directly with your truck's computer to provide real-time data stream analysis, letting you pinpoint issues with precision. This cuts down on waste from unnecessary part replacements, saving you time and hundreds or even thousands of dollars.
- All OBD2 Functions + Battery Health Monitoring – Unlike many obd2 scanners on the market that only cover partial OBD2 features, ours gives you full OBD2 capability: read & clear codes, live data, freeze frame data, I/M readiness checks, EVAP tests, on-board monitor, O2 sensor tests, vehicle info, and DTC lookup. That means more detailed insights for pros and DIYers alike. The NL102 isn't just a code scanner – it's a battery saver. Regularly check your car's battery health, and catch issues before it dies completely. No more unexpected no-starts in the driveway or on the road. It diagnoses battery condition accurately, helping you avoid costly last-minute repairs.
- Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.
This product presentation was made with AAWP plugin.
Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API




