NHTSA ID Number: 10241743
Manufacturer Communication Number: ReferenceS
TSB/Document Date: 2023-09-05
Summary
Quick Reference Specification Book
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: ReferenceS
Replacement Service Bulletin Number:
MFR Communication Date: 2014-02-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
2014 Volkswagen
Tiguan
Quick Reference Specification Book
Table of Contents
DTC Chart........................................................................ 1
Engine Codes CCTA..............................................................1
Fuel and Air Mixture, Additional Emissions Regulations...........1
Ignition System.........................................................................8
Additional Exhaust Regulation................................................10
Speed and Idle Control........................................................... 11
Control Module and Output Signals........................................12
Fuel and Air Ratios Control Module........................................13
Ignition System.......................................................................16
Additional Emissions Regulations..........................................17
VW
Tiguan Quick Reference Specification Book
•
February 2014
i
DTC Chart
Engine Codes CCTA
Fuel and Air Mixture, Additional
Emissions Regulations
Error Message
Malfunction Criteria and
Threshold Value
P000A
Intake Camshaft Position Slow
Response
Signal change > 8° CRK for
> 2.9 s and adjustment angle
< 2.5° CRK
P0010
Intake Camshaft Position
Actuator Circuit Open Bank 1
Signal voltage, > 4.7 - 5.4 V
P0011
Intake Camshaft Position
Timing - Over-Advanced
Signal change > 8° CRK for
> 2.9 s and adjustment angle
< 2.5° CRK
P0016
Crankshaft Position –
Camshaft Position Correlation
• Permissible deviation
< -11° Rev
or
• Permissible deviation
> 11° Rev
P0030
HO2S Heater Control Circuit
Bank 1 Sensor 1
Heater voltage 4.70 - 5.40 V
P0031
HO2S Heater Control Circuit
Low Bank 1 Sensor 1
Heater voltage < 0 to 3.26 V
P0032
HO2S Heater Control Circuit
High Bank 1 Sensor 1
Signal current > 5.50 A
P0036
HO2S Heater Control Circuit
Bank 1 Sensor 2
Heater voltage, 4.50 - 5.50 V
P0037
HO2S Heater Control Circuit
Low Bank 1 Sensor 2
Heater voltage < 3.00 V
P0038
HO2S Heater Control Circuit
High Bank 1 Sensor 2
Heater current, > 2.70 - 5.50 A
P0042
HO2S Heater Control Circuit
Bank 1 Sensor 3
Heater voltage 2.34 to 3.59 V
P0043
HO2S Heater Control Circuit
Low Bank 1 Sensor 3
Heater voltage < 2.34 V
P0044
HO2S Heater Control Circuit
High Bank 1 Sensor 3
Heater voltage > 3.59 V
P0068
MAF vs Throttle Position
Correlation
Plausibility with fuel system
• Load calculation < -22%
Plausibility with fuel system
• Load calculation > 22%
VW
Tiguan Quick Reference Specification Book
•
February 2014
DTC Chart
DTC
1
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0070
Ambient Air Temperature
Sensor Circuit
Ambient air temperature
< -50° C
P0071
Ambient Air Temperature
Sensor Range/Performance
• Difference in value between
ECT and AAT at engine start
(depending on engine off time)
> 25 K
and
• Difference in value between
AAT and IAT at engine start
(depending on engine off time)
> 25 K
P0072
Ambient Air Temperature
Sensor Circuit Low
Ambient air temperature > 77°
C
P0087
Fuel Rail/System Pressure Too Low
• Fuel trim activity 0.90 - 1.15 [-]
• Pressure controller activity
> 2 MPa
• Difference between target and
actual pressure > -16.4
P0100
Mass Air Flow Circuit Fault
MAF sensor signal 0 µs
P0101
Mass Air Flow Ciruit Range/
Performance
Mass air flow vs.
• Upper threshold model
> 60 - 800 kg/h
• lower threshold model < 0 to
400 kg/h
• Load calculation > 18%
• Fuel system < -18%
P0102
Mass or Volume Air Flow
Circuit Low Input
MAF sensor signal < 66 µs
P0103
Mass or Volume Air Flow
Circuit High Input
MAF sensor signal > 4500 µs
P0106
Manifold Absolute Pressure/
Barometric Pressure Circuit
Range/Performance
• Difference of boost pressure
signal vs altitude sensor signal
> 230 hPa
or
• Difference of boost pressure
signal vs altitude sensor signal
< -130 hPa
P0111
Intake Air Temperature Sensor
1 Circuit Range/Performance
• Difference in value IAT - ECT
@ engine start (depending on
engine off time) > 25 °C
• Difference in value IAT AAT @ engine start > 25 °C
(depending on engine off time)
2
VW
Tiguan Quick Reference Specification Book
•
February 2014
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0112
Intake Air Temperature Sensor
1 Circuit Low Input
Intake air temperature > 141° C
P0113
Intake Air Temperature Sensor
1 Circuit High Input
Intake air temperature < -46° C
P0116
Engine Coolant Temperature
Sensor 1 Circuit Range/
Performance
• No change on signal < 2 K
or
• Signal in range > 89° C with
no change on signal 1.5° K
P0117
Engine Coolant Temperature
Sensor 1 Circuit Low Input
Engine coolant temperature
> 140° C
P0118
Engine Coolant Temperature
Sensor 1 Circuit High Input
Engine coolant temperature
< -40° C
P0121
Accelerator Pedal Position
Sensor / Accelerator Pedal
Position Sensor 2 Circuit
Range/Performance
• TPS 1 - TPS 2 > 5.10 - 6.30%
• Actual TPS 1 calculated value
> actual TPS 2 calculated
value
• TPS 1 calculated value
> 9.00%
P0122
Accelerator Pedal Position
Sensor / Accelerator Pedal
Position Sensor 2 Circuit Low
Input
Signal voltage < 0.20 V
P0123
Accelerator Pedal Position
Sensor / Accelerator Pedal
Position Sensor 2 Circuit High
Input
Signal voltage > 4.81 V
P0130
HO2S Circuit Bank 1 Sensor 1
O2S ceramic temperature
< 640° C
P0131
HO2S Circuit, Bank 1 Sensor
1 Low Voltage
VM > 1.75 V
UN > 1.50 V
IA or IP > 0.30 V
P0132
HO2S Circuit, Bank 1 Sensor
1 High Voltage
VM > 3.25 V
UN > 4.40 V
DTC Chart
IA or IP > 7 V
VW
Tiguan Quick Reference Specification Book
•
February 2014
3
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0133
HO2S Circuit Slow Response
Bank 1 Sensor 1
Signal dynamic slope check
• O2S signal front vs. modeled
O2S signal ratio < 0.35 and
> 0.01
• Lower value of both counters
for area ratios L to R and R to
L ≥ 5 times
Oscillation check
• Lambda amplitude signal
> 20%
• Cycles > 8
• Time lambda > lambda
amplitude 400 m s
Delay check
• Delay modeled lambda signal
minus measured signal > 460
ms
• Cycles > 12
P0135
HO2S Heater Circuit Bank 1
Sensor 1
• Heater duty cycle, >100%
• O2S ceramic temperature
< 715° C
• Time after O2S heater on 40 s
P0136
HO2S Circuit Bank 1 Sensor 2
Malfunction
• Delta voltage one step at
heater switching > 2.00 V
• Number of checks ≥ 4
P0137
HO2S Circuit Low Voltage
Bank 1 Sensor 2
Cold condition
• Signal voltage < 0.06 V for
time > 3 Sec.
Warm condition
• Signal voltage < 0.01 V
• Reaction at closed loop
enrichment - no reaction
P0138
HO2S Circuit High Voltage
Bank 1 Sensor 2
Signal voltage > 1.08 V for
> 5 Sec.
P0139
HO2S Circuit Slow Response
Bank 1 Sensor 2
• EWMA filtered transient time
at fuel cutoff > 0.0 s
• In voltage range of 201 - 401
mV
• Number of checks, ≥ 3
4
VW
Tiguan Quick Reference Specification Book
•
February 2014
Error Message
Malfunction Criteria and
Threshold Value
P013A
HO2S Circuit
Slow Response
Rich to Lean Bank 1 Sensor 3
• EWMA filtered max differential
transient time at fuel cutoff
≥ 0.65 s
• Number of checks ≥ 1
P013B
HO2S Circuit Slow Transient
Time Lean to Rich Bank 1
Sensor 2
• EWMA filtered max differential
transient time at fuel cutoff ≥
1.50 s
• Number of checks ≥ 1
P013E
HO2S Circuit Check of Delay
Time Rich to Lean Bank 1
Sensor 2
• Arithmetic filtered max
differential delay time at lean
to rich transition = n.a.
or
• EWMA filtered max differential
delay time at lean to rich
transition > 1.0 [s] and number
of checks ≥ 3.00 [-]
P013F
HO2S Circuit Check of Delay
Time Lean to Rich Bank 1
Sensor 2
• Arithmetic filtered max
differential delay time at lean
to rich transition = n.a.
or
• EWMA filtered max differential
delay time at lean to rich
transition > 1.5 [s] and number
of checks >= 3.00 [-]
P0140
HO2S Circuit No Activity
Detected Bank 1 Sensor 2
Signal voltage
• Signal voltage .40 - .60 V
for > 3 Sec
Internal resistance
• > 40000 ohm
P0141
HO2S Heater Circuit Bank 1
Sensor 2
Heater resistance, 702 - 5250 O
P0142
HO2S Sensor Circuit Bank 1
Sensor 3
• Delta voltage one step at
heater > 2.0 V
• Number of checks, 4
P0143
HO2S Sensor Circuit Low
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi
/ VW
/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery
, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has) - REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW
/MINI
/RollsRoyce / Audi
/VW
/Seat/Skoda/Bentley
/Bugatti
/Lamborghini
, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
- 【Designed for Most Mercedes-Benz
, Sprinter
and Smart from 1996-2023】As every car model of Benz has its-owned specific car system and ECUs, not all models are equipped with a complete vehicle ECU, which may cause the scanner to be unable to perform all listed reset services on some models, or even completely incompatible. Like For Sprinter
's newer models, it support diagnostic functions only, lacking support for specialized service functions.. So please tell us the car's VIN and required service before purchase for compatibility check. You may also refer to the instructions in the eighth image of the main product photos to perform your inquiry. - 【Up to 38 Reset Services】MB V3.0 2026 Version diagnostic tool performs Up to 38 maintenance services - Oil Rest , SAS, EPB, ETC, D-P-F, TPMS, ABS, Suspension, Air Conditioner, Head Lamp, Body Stability, Engine Control, Seat, Fuel Pump, Air-Filter, Engine Idle, Door, Im-mo-bilizer, Injector Coding, Transmission Control, Miscellaneous, Adblue, BMS, Cluth, Water Pump, NOxSensor, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Shutoff Test, Speed Limit Assist, Control Unit Reset, Oxygen Sensor, Seat Belt, Cruise Control System, Turbocharger, Crankshaft, Language Setting and etc. (Tips: Please update the software after receiving the product to obtain new service functions)
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2026 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
- 【Real Time Record & Graph View】iCarsoft MB V3.0 (2026 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage, our tech team will service you in time.
This product presentation was made with AAWP plugin.
Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API




