Technical Service Bulletin
01 4.0TFSI Cylinder 1 or 6 Misfires - RS6 or RS7
01 23 75 2071263/2 August 29, 2023. Supersedes Technical Service Bulletin Group 01 number 23-74 dated
August 24, 2023, for reasons listed below.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

RS 6, and RS 7

2022

All

Not Applicable

Condition
REVISION HISTORY
Revision

Date

Purpose

2

-

Revised Warranty (Updated claim types, service number)

1

08/24/2023

Initial publication

Customer states:
• The MIL/exhaust emissions warning light flashes or is intermittently illuminated.
• No noticeable differences in performance are noted while the MIL/ exhaust emissions warning is illuminated.
• The “Start System: Fault” may also appear in the instrument cluster.
Workshop findings:
The following DTCs with specified ambient conditions must be stored in the ECM, -J623- (address word 0001):
• P030000 (Misfire detected)
• P030100 (Cylinder 1 Misfire detected)
• P030600 (Cylinder 6 Misfire detected)
Ambient Conditions
• Engine speed below 1900 rpm
• Normed load value: less than 20%
• Engine oil temperature: below 75 C
Note: If misfires for other cylinders or the ambient conditions outside the scope mentioned above are
stored in the ECM, -J623- (address word 0001), please continue with normal diagnosis process.

Technical Background
The ECM software has been optimized.

© 2023 Audi of America, Inc.

Page 1 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Production Solution
Not applicable.

Service
SVM Update instructions:
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Model

MY22, RS6 and
RS7

Old Target Data
Container
Number

Old Target
Data
Container
Version

New Target Data
New Target Data SVM Code
Container Number Container Version Input
(or higher)

(or higher)

4K0907557G

0001-0002

4K0907557G

0003

01A297

Warranty
Claim Type:

• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.

Service Number:

2740

Damage Code:

0039

Labor Operations:

Software Update (Includes checking for
DTCs)

0151 0000

Time stated on
the diagnostic
protocol (Max
50 TU)

Diagnostic Time:

GFF

0150 0000

Max 10 TU

Road test prior to the service procedure

No allowance

0 TU

Road test after the service procedure

0121 0004

10 TU

Claim Comment:

© 2023 Audi of America, Inc.

As per TSB 2071263/2

Page 2 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.

Required Parts and Tools
Tool Number

Tool Description

VAS 6160/VAS 6150

VAS tester with the current version of ODIS (Windows 10)

Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2071263) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.

© 2023 Audi of America, Inc.

Page 3 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.