NHTSA ID Number: 10240271
Manufacturer Communication Number: SC273_TSB
TSB/Document Date: 2023-08-02
Summary
VOLUNTARY SERVICE CAMPAIGN: VCU SOFTWARE LOGIC UPGRADE (SC273) - This bulletin provides information to upgrade the software logic of the Vehicle Control Unit (VCU) on certain 2022-2023MY EV6 (CV) vehicles produced from November 17, 2021 through May 30, 2023, in order to enhance the following two (2) functions: 1. Illumination of Brake lamp without depressing the brake pedal when the vehicle is quickly decelerating by way of regenerative braking in ‘i-Pedal’ mode. 2. Shift operation gear selection into Park (P) automatically when the auxiliary battery’s (12V) voltage is critically low and the vehicle is stopped.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SC273_TSB
Replacement Service Bulletin Number:
MFR Communication Date: 2023-07-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
GROUP
MODEL
Service Campaign
2022-2023MY
EV6 (CV)
All except GT model
NUMBER
DATE
SC273
July 2023
VOLUNTARY SERVICE CAMPAIGN
SUBJECT:
VCU SOFTWARE LOGIC UPGRADE (SC273)
This bulletin provides information to upgrade the software logic of the Vehicle Control Unit (VCU) on certain
2022-2023MY EV6 (CV) vehicles produced from November 17, 2021 through May 30, 2023, in order to
enhance the following two (2) functions:
1.
Illumination of Brake lamp without depressing the brake pedal when the vehicle is quickly decelerating
by way of regenerative braking in ‘i-Pedal’ mode.
2.
Shift operation gear selection into Park (P) automatically when the auxiliary battery’s (12V) voltage is
critically low and the vehicle is stopped.
Follow the procedure outlined in this publication to upgrade the software logic of the VCU system using the
KDS ECU Upgrade function as described in this bulletin on the applicable vehicle. For confirmation that the
latest reflash has been applied to a vehicle you are working on, verify the ROM ID using the table on page 3
of this bulletin. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs.
NOTICE
To assure complete customer satisfaction, always remember to refer to KDealer+ Warranty
Coverage (validation) Inquiry Screen (Service → Warranty Coverage → Warranty Coverage Inquiry)
for a list of any additional campaigns that may need to be performed on the vehicle before returning
it to the customer.
A printed copy is for reference only; publication information can be updated at any time.
Always refer to KGIS for the latest information. After logging in kdealer.com, the newest technical
publications are listed in ‘Service Releases’ and has the latest service information that has been released.
Page 2 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
ECU Upgrade Procedure:
To correct this condition, the ECU should be reprogrammed using the KDS
download, as described in this bulletin.
Upgrade Event Name
691.CV VCU S/W UPGRADE
NOTICE
•
Confirm a fully charged battery (12.3 volts or higher is necessary) is used or utilize a fully
charged jump starter box connected to the battery.
•
Ensure the KDS GDS is sufficiently charged at 60% or higher prior to reflash.
•
All ECU upgrades must be performed with the ignition set to the ‘ON’ position unless otherwise
stated.
•
Damaged VCI II units should not be used and promptly replaced.
•
Be careful not to disconnect the VCI-II connected to the vehicle during the ECU upgrade
procedure.
•
DO NOT start the engine during ECU upgrade.
•
DO NOT turn the ignition key ‘OFF’ or interrupt the power supply during ECU upgrade.
•
When the ECU upgrade is completed, turn the ignition ‘OFF’ and wait 10 seconds before
starting the engine.
•
ONLY use approved ECU upgrade software designated for the correct application.
IMPORTANT
It is recommended to ALWAYS check the Electronic Parts Catalog (EPC) to locate the ECU Part
Number respective to Auto/Manual Mode ROM IDs. DO NOT reference the parts label affixed to
the ECU.
NOTICE
If a ‘Communication Fail’ error notice appears or if the upgrade cannot be performed, DO NOT
disconnect the KDS/VCI-II. Contact GIT America Help Desk at (888) 542-4371 or Techline.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
Page 3 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
ROM ID INFORMATION TABLE:
Upgrade Event #691
Model
EM
IMMO
ECU P/No.
ROM ID
Previous
New
CV1A-N0-SB0-V400
CV1A-N0-SB1-V400
CV1A-N0-SB2-V400
39751 1XCN1
CV1A-N0-SB3-V400
CV1A-N0-SB5-V400
CV1A-N0-SB4-V400
CV1A-N0-SD2-V400
EV6
VCU
(CV)
CV1A-N0-SD3-V400
Yes
CV1A-N0-KB0-V200
CV1A-N0-KB1-V200
CV1A-N0-KB2-V200
39751-1XCN4
CV1A-N0-KB3-V200
CV1A-N0-KB5-V200
CV1A-N0-KB4-V200
CV1A-N0-KD2-V200
CV1A-N0-KD3-V400
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's ECM ROM ID
and reference the Information Table as necessary.
NOTICE
Prior to performing the ECU upgrade, be sure to check that the KDS is fully charged.
1.
Connect the VCI-II to the OBD-II connector,
located
under
the
driver’s
side
of
the
instrument panel.
NOTICE
The ECU upgrade function on KDS
operates wirelessly. It is not necessary
to perform the upgrade via USB cable.
2.
With the ignition ON, turn ON the KDS tablet.
Select ‘KDS’ from the home screen.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
Page 4 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
3.
Confirm communication with VCI (A) and then
configure the vehicle (B) using the ‘AUTO VIN’
(C) feature.
B
A
C
4.
Select ‘ECU Upgrade’.
5.
The KDS will check the server for recently
uploaded
Events
and
then
automatically
download Upgrade Event #691.
NOTICE
The vehicle must be identified in
Vehicle Selection to download an
Event for that vehicle.
6.
KDS
screenshot
shown
above
is
for
demonstration purposes only. Events shown in
screenshot are not applicable to this bulletin.
Select Auto Mode.
CAUTION
Do NOT attempt to perform a Manual
Mode upgrade UNLESS Auto Mode
fails. Always follow the instructions
given on the KDS in either Auto or
Manual mode.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
Page 5 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
7a.
Select the ‘VCU’ system under the System
selection menu.
7b.
Select the applicable Upgrade Event #691.CV
D
VCU S/W UPGRADE and select ‘Upgrade’ to
continue.
8.
The ECU upgrade will begin and the progress
of the upgrade will appear on the bar graph.
E
Upgrade part (1/2) (E) will download the
upgrade event to the VCI-II. Upgrade part (2/2)
(F) will upgrade the ECU.
CAUTION
F
Do not touch the system buttons (like
‘Back’,
‘Home’,
‘etc.’)
while
performing ECU Upgrade.
9.
If a “Communication Fail” screen appears, verify
that the VCI-II and KDS are communicating
properly. Select ‘OK’ and restart the from step
4.
NOTICE
If an error notice continues to appear
or
if
the
upgrade
cannot
be
performed, DO NOT disconnect the
KDS/VCI-II. Contact GIT America Help
Desk at (888) 542-4371 or Techline.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
Page 6 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
10.
When instructed on the KDS, turn the ignition
OFF for ten (10) seconds then back on. Select
‘OK’ to continue.
11.
Once the upgrade is complete, select ‘OK’ to
finalize the procedure.
12.
When prompted, select ‘YES’ to check for
Diagnostic Trouble Codes (DTC) and erase any
DTCs stored such as EPS, ESC, and TPMS that
may have been set during the upgrade.
13.
Start the engine to confirm normal operation of
the vehicle.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
Page 7 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
Manual Upgrade Procedure:
NOTICE
The manual upgrade should ONLY be performed if the automatic upgrade fails.
If the automatic upgrade fails, turn the ignition ‘OFF’ for about 10 seconds then place it back in
the ‘ON’ position to reset the control unit BEFORE performing manual upgrade.
See table below for ‘Manual Mode’ passwords.
Manual Mode ECU Upgrade Passwords
Menu
Password
CV VCU: 39751-1XCN1
5401
CV VCU: 39751-1XCN4
5201
1.
Within the ECU Upgrade screen displayed, select Manual Mode.
2.
Select the ‘VCU’ system under the System selection menu. Select Upgrade Event #691 and select
Upgrade to continue.
3.
Select the appropriate control unit part number with reference to the ROM ID Information Table on
page 3, and select OK.
4.
Enter the appropriate password from the Manual Mode password table above and select OK.
5.
The upgrade will begin and the progress of the upgrade will appear on the bar graph.
6.
When instructed on the KDS, turn the ignition OFF for ten (10) seconds then back on. Select OK.
7.
Once the upgrade is complete, select OK to finalize the procedure.
8.
When prompted, select YES to check for Diagnostic Trouble Codes (DTC) and erase any DTCs stored
such as EPS, ESC, and TPMS that may have been set during the upgrade.
9.
Start the engine to confirm proper operation of the vehicle.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
Page 8 of 8
VCU SOFTWARE LOGIC UPGRADE (SC273)
SUBJECT:
AFFECTED VEHICLE RANGE:
Model
Production Date Range
EV6 (CV)
November 17, 2021 to May 30, 2023
REQUIRED TOOL:
Tool Name
Figure
Comments
KDS
Kia
Diagnostic System
WARRANTY INFORMATION:
N Code: N99 C Code: C99
Claim
Type
R
Causal P/N
Qty.
39751 1XCN4
0
Repair
Labor Op
Op
Replacement
Description
Code
Time
P/N
(SC273A)
VCU S/W Logic Upgrade
230063R0
0.7
M/H
N/A
Qty.
0
NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference
SC273 when accessing the KDealer+ system.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC273 EV6 (CV) July 2023
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions for lifetime f.r.e.e update for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
- 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API