NHTSA ID Number: 10238062
Manufacturer Communication Number: B010122
TSB/Document Date: 2023-06-26
Summary
With the court's FINAL approval, BMW
of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC. The Settlement Benefits are effective and available on and after February 9, 2022. Note: This bulletin is a notice of a Class Action Settlement Service Campaign benefits that are now available.
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
SIB 01 01 22
N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL
CONSUMPTION DIAGNOSIS/REPAIR
2023-05-10
This Service Information bulletin (Revision 3) supersedes SI B01 01 22 dated December 2022
What’s New:
Engine oil part numbers updated
The B010122 N63TU1 Oil Consumption (OCTest) Claim Info attachment has been corrected and
updated
The B010122 N63TU1 Oil Consumption Checklist attachment has been reformatted and updated
MODEL
ESeries
F01
F01
F01
F01
F02
F02
F02
F02
F06
F06
F06
F07
F07
F10
F10
F12
F12
F13
F13
MY
2013 to
2015
2013 to
2015
2013 to
2015
2013 to
2015
2013 to
2015
2013 to
2015
2013 to
2015
2013 to
2015
2013 to
2019
2013 to
2019
2015 to
2019
2013 to
2015
2013 to
2017
2014 to
2016
2014 to
2016
2013 to
2018
2013 to
2018
2013 to
2017
2013 to
2017
Model Description
Production Dates
750i Sedan
June 18, 2012 to May 21, 2015
N63TU1
750i xDrive Sedan
June 18, 2012 to May 19, 2015
N63TU1
ALPINA B7 SWB
July 12, 2012 to May 12, 2015
N63TU1
ALPINA B7 xDrive SWB
July 09, 2012 to May 04, 2015
N63TU1
750Li Sedan
June 18, 2012 to May 21, 2015
N63TU1
750Li xDrive Sedan
June 19, 2012 to May 20, 2015
N63TU1
ALPINA B7 LWB
July 06, 2012 to May 12, 2015
N63TU1
ALPINA B7 xDrive LWB
July 09, 2012 to May 11, 2015
N63TU1
650i Gran Coupe
650i xDrive Gran
Coupe
ALPINA B6 xDrive Gran
Coupe
550i Gran Turismo
May 03, 2012 to September 25,
2018
February 02, 2012 to September
24, 2018
March 14, 2014 to September 12,
2018
June 18, 2012 to February 13,
2015
N63TU1
N63TU1
N63TU1
N63TU1
550i xDrive Gran
Turismo
June 20, 2012 to January 27, 2017
N63TU1
550i Sedan
June 27, 2013 to October 20, 2016
N63TU1
550i xDrive Sedan
July 25, 2013 to October 21, 2016
N63TU1
650i Convertible
June 22, 2012 to May 28, 2018
N63TU1
650i xDrive Convertible
June 18, 2012 to May 28, 2018
N63TU1
650i Coupe
June 20, 2012 to February 23,
2017
June 18, 2012 to February 14,
2017
N63TU1
650i xDrive Coupe
N63TU1
Copyright ©2023 BMW of North America, Inc.
about:blank
1/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
2014 to
2018
2015 to
2019
F15
F16
X5 xDrive50i
July 17, 2013 to June 30, 2018
N63TU1
X6 xDrive50i
March 04, 2014 to May 16, 2019
N63TU1
SITUATION
With the court’s FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide
settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke
Aktiengesellschaft and BMW of North America, LLC.
The Settlement Benefits are effective and available on and after February 9, 2022.
Note: This bulletin is a notice of a Class Action Settlement Service Campaign benefits that
are now available. This is NOT a notice of a Recall or Service Action.
Eligible Class Vehicles that Qualify: They fulfill the applicable State’s requirements, have a valid
vehicle registration in addition to the meeting the criteria that is described in the corresponding
Important Note below.
This bulletin applies to Class Members who are current owners/lessees of Class Vehicles that have not
opted-out of this Settlement, therefore, accepting the corresponding Class Member benefits, the terms,
and conditions.
Eligible Class Vehicles will have the following VIN-specific Vehicle Comment in the DCSnet Warranty
Vehicle Inquiry.
SI B01 01 22 and B01 02 22: The current owner or lessee (Class Member) and their Class
Vehicle that qualifies, as both are defined in these corresponding Service Information
Bulletins, are eligible to receive the Service Campaigns (Engine oil consumption diagnosis,
engine repair and future engine level oil top offs) and other benefits that are provided
through the N63TU1 Engine Class Action Settlement. These Service Campaign benefits are
subject to certain limitations and exclusions which are also outlined in the Settlement and
the bulletins.
Note: Before performing a repair and submitting a claim, first confirm that the Class member’s Class Vehicle
has the above Notice of Eligibility in the DCSnet Warranty Inquiry’s Vehicle Comments section.
Important Note:
The service (repair) benefit that is provided by this settlement is subject to the corresponding vehicle
eligibility requirements, limitations, and exclusion criteria that apply to all repairs that will result with a claim
submission to BMW.
Specifically, the coverage shall be null and void because the:
Vehicle has been declared a total loss or sold for salvage purposes, the true mileage cannot be
determined, the Vehicle Identification Number (VIN) has been altered and cannot be
determined, and/or the
Applicable covered vehicle components were previously replaced with used or salvaged
automobile parts
The BMW DCSnet Warranty Vehicle Inquiry (WVI) may not contain a corresponding Vehicle Comment that
identifies that one or more of the above non-eligible vehicle situations apply. In these cases, please use any
other resources that are available at your center to confirm the vehicle’s eligibility (for example, CARFAX®).
Copyright ©2023 BMW of North America, Inc.
about:blank
2/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
Always verify the correct engine serial number is installed in the vehicle. Enter the VIN into AIR and
compare the engine serial number to the engine serial number in AIR using “Vehicles Details”.
If the engine serial number does not match-
Create a TSARA TeileClearing Hotline case that includes or identifies the issues that could
affect the vehicle’s eligibility
Wait for a response before proceeding
Provide a picture of the engine serial number in the case
If it is determined the vehicle is non-eligible, or if you are uncertain of the vehicle’s eligibility, or you do not
have access to any other resources; please create a TSARA TeileClearing Hotline case that includes or
identifies the issues that could affect the vehicle’s eligibility and wait for a response before proceeding.
Non-Eligible Class Vehicles
Certain Class Members have opted out of this Settlement. Those Class Members are excluded and not
eligible for any of the corresponding Class benefits.
The non-eligible Class Vehicles have been updated with the following VIN-specific Vehicle Comment in
the DCSnet Warranty Vehicle Inquiry.
SI B01 01 22 and B01 02 22: The current owner/lessee of this Class Vehicle has opted-out
of the N63TU1 Engine Class Action Settlement. By asking to be excluded, the owner/lessee
and their N63TU1 engine vehicle are not eligible to receive any of the Settlement Class
Member benefits.
If you have vehicle repair eligibility, coverage and/or claim submission questions, please contact the
Warranty department through IDS by selecting Coverage, Policy, Coding Questions and Mileage
Corrections prior to performing any repair.
Class Allegations
The plaintiffs in the lawsuit alleged that certain model year 2013 through 2019 BMW 5 Series, 6 Series, 7
Series, X5 and X6 vehicles with the N63TU1 engine consume excessive amounts of engine oil, requiring
additional oil changes and the need for adding engine oil between regular oil changes.
BMW NA, which distributes and warrants BMW vehicles in the U.S., denies these allegations, and stands
behind and supports its products.
Class Vehicles
The eligible US-specification BMW vehicles (listed above) that were purchased or leased, registered, and
operated in the United States, including the District of Columbia and Puerto Rico.
Settlement Class Members (Who did not opt-out)
Settlement Class Members are persons or entities who currently own or lease a Settlement Class Vehicle
that was distributed for sale or lease in the United States and registered and operated in the United States,
including the District of Columbia and Puerto Rico.
Inquiries and Updates
Class Members can call toll free at 1-888-208-0032 or visit www.Isleysettlement.com. Updates will be
posted to the settlement website as new information becomes available.
Copyright ©2023 BMW of North America, Inc.
about:blank
3/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
The Claims Administrator will address questions related to the Reimbursement Benefits only.
CAUSE
When performed by an authorized BMW center in the United States (including Puerto Rico), the
Settlement’s Service Campaign benefits below are covered as follows:
Diagnosis and N63TU1 Oil Consumption-Related Engine Repairs at 100 Percent (NonEngine Replacement)
Year One (1): Regardless of the Class Vehicle’s time (age) and mileage, then for
Year Two (2) and after: Up to first 10 years/120,000 for the Class Vehicle, whichever occurs first,
as determined by the in-service date
Oil Consumption-Related N63TU1 Engine Replacement (Matrix applies)
Year One (1): Regardless of the Class Vehicle’s time (age) together with applying the vehicle
mileage-based contribution matrix up to first 120,000 miles, then for
Year Two (2) and after: Up to the vehicle’s first 10 years together with applying the vehicle
mileage-based contribution matrix up to first 120,000 miles
N63TU1 Engine Oil Consumption Tests/Inspections
Eligible Settlement Class Members’ may receive up to three (3) free engine oil consumption
tests/inspections for their eligible Class Vehicles.
N63TU1 Oil Consumption-Related Engine Repair or Engine Replacement
After one failed oil consumption test (exceeds specification) on a Class Member’s Class Vehicle, and a
confirmation by an authorized BMW Center that the Class Vehicle has an oil consumption issue, BMW NA
will, at its discretion, either authorize the BMW Center:
A. To make one engine repair attempt (at 100 percent), or
B. Offer the Class Member an engine replacement per the contribution Matrix by mileage below
If after the BMW NA approved engine repair (A) is performed, a Class Member’s Class Vehicle returns
and fails a second engine oil consumption test (exceeds specification), the Class Member’s Class
Vehicle is then entitled to an engine replacement per the provisions and exclusions in the Settlement
attached document.
Copyright ©2023 BMW of North America, Inc.
about:blank
4/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
Important Notes:
1. No Settlement Class Member contribution applies if the Class Vehicle engine is still covered under either
the New Vehicle Limited Warranty term or the BMW Certified Pre-Owned warranty term.
2. If there is no applicable warranty coverage the Settlement Class Member shall contribute to the total
replacement cost, including parts, labor and sublet, in accordance with the schedule above.
3. Replacement N63TU1 engines will have improved components compared to engines produced before
May 2017.
4. Subject to the mileage limitations above for all eligible Class Members, engine replacement contribution
will only be made until the later of 10 years from the Class Vehicle’s in-service date or 1 year from the
Effective Date.
5. In the event a Class Member’s engine fails or otherwise needs replacing that is unrelated to Excess Oil
Consumption, this benefit and the schedule above shall not apply, and the Class Member will not be entitled
to any contribution from BMW.
CORRECTION
For eligible Class Members who did not opt out of the N63TU1 Engine Settlement with Class Vehicles that
qualify, perform the engine oil consumption diagnosis and engine repair as applicable.
Please follow the instructions in the PROCEDURE section.
PROCEDURE
The Service Campaign (Engine oil consumption diagnosis and repair) benefit that is provided by this
settlement to the Class member and their Class Vehicle is subject to the corresponding vehicle eligibility
requirements, limitations, and exclusion criteria that apply to all repairs that will result with a claim
submission to BMW.
Specifically, the coverage shall be null and void because the:
Vehicle has been declared a total loss or sold for salvage purposes, the true mileage cannot be
determined, the Vehicle Identification Number (VIN) has been altered and cannot be
determined, and/or the
Applicable covered vehicle components were previously replaced with used or salvaged
automobile parts
Copyright ©2023 BMW of North America, Inc.
about:blank
5/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
The BMW DCSnet Warranty Vehicle Inquiry (WVI) may not contain a corresponding Vehicle Comment that
identifies that one or more of the above non-eligible vehicle situations apply. In these cases, please use any
other resources that are available at your center to confirm the vehicle’s eligibility (for example, CARFAX®).
Always verify the correct engine serial number is installed in the vehicle. Enter the VIN into AIR and
compare the engine serial number to the engine serial number in AIR using “Vehicles Details”.
If the engine serial number does not match-
Create a TSARA TeileClearing Hotline case that includes or identifies the issues that could
affect the vehicle’s eligibility
Wait for a response before proceeding
Provide a picture of the engine serial number in the case
If it is determined the vehicle is non-eligible, or if you are uncertain of the vehicle’s eligibility, or you do not
have access to any other resources; please create a TSARA TeileClearing Hotline case that includes or
identifies the issues that could affect the vehicle’s eligibility and wait for a response before proceeding.
For frequently asked questions go to the TIS.Net Advanced Information, search for “N63TU1 Oil
Consumption FAQ”.
Engine serial number verification (included in the engine diagnosis labor operations):
Verify that the proper engine serial number is installed in the vehicle before starting any diagnosis or repairs.
NOTE: Only vehicles equipped with the original engines (engine serial number matching the serial number
in AIR), or with a BMW Replacement Engine (purchased from BMW PDCs and replaced under Warranty; or
customer pay) are eligible to participate in this Class Action Settlement.
The engine serial number is located at the
lower front right corner of the engine block.
Engine serial number (1)
Engine type Number (2)
Copyright ©2023 BMW of North America, Inc.
about:blank
6/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
Compare the engine serial number in AIR.
Enter the VIN (1).
Enter the VIN (1).
Select “Vehicle details” (1).
Engine serial number is shown (2).
If the serial numbers do not match, then create a TSARA TeileClearing Hotline case with the numbers that
are shown on the engine block and wait for a response before proceeding with repairs.
Regardless, if you are requesting an engine repair or an engine replacement, each TSARA case requires
enclosing a photograph of the engine serial number.
To reduce processing time, also state the engine serial number in the case comments before submitting.
All engine serial numbers will be verified at the Warranty Part Return Center.
IMPORTANT NOTES:
1. Only a Shop Foreman is authorized to approve the results of N63TU1 Class Action diagnosis and repair.
2. Complete the attached N63TU Oil Consumption Checklist along with the relevant photographs must be
submitted via a TSARA TeileClearing Hotline case titled “N63TU1 Class Action Consumption”.
3. Do not attach photographs which are not relevant, vague, not clear, and which are not providing a clear
evidence/source of an observed major leak. A TC case with an excessive number of poor-quality
photographs requires more time to process, resulting in a delayed response.
4. Please specify in the case details the photograph description. Renaming the photograph is not
necessary.
For example:
Front engine cover = X1234.jpg
Turbo inspection = X5678.jpg
5. The TSARA TeileClearing N63TU1 Class Action process has started on February 09, 2022. Weekend
and holiday submissions will beCopyright
accepted but
mustBMW
wait for
a response
on the
first business day before
©2023
of North
America,
Inc.
about:blank
7/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
starting any repairs.
6. It is the Shop Forman’s responsibility to provide a complete and accurate diagnosis documentation, as
described below.
7. Including follow-up/updates to the original TSARA TeileClearing case prior to performing any additional
related work that is found needed during the repair process.
8. Incomplete, missing, or misleading N63TU1 Class Settlement engine diagnosis and repairs will result in
debiting of the Warranty claim.
9. Do not drain and measure the engine oil. Follow the applicable instructions to use the electronic oil level
measurement.
Measuring the engine oil level:
1. Do not drain and measure the engine oil. Follow the applicable instructions to use the
electronic oil level measurement.
Do not reprogram the vehicle.
The engine oil must be measured using the electronic measurement test plan called “Motor Oil Quantity”
found in ISTA/D.
Test Plan Path:
Select “Vehicle management”
Select “Powertrain”
Select “Engine electronics, quality control valve (MSV)
Select “Engine oil”
Select “ABL Motor oil quantity”
Select “Display”
Follow the onscreen prompts. The test plan will measure the engine oil in 100 ml increments.
Top up the engine oil accordingly and perform the test plan a second time (after topping) to ensure
the proper full engine oil level is reached.
The vehicle must be driven by the customer roughly 750 to 1,000 miles or until the next low engine oil
message appears (whichever comes first). After the customer returns the engine oil must be measured
again using the electronic measurement test plan called “Motor Oil Quantity” found in ISTA/D (see test plan
path above).
If the oil consumption is not greater than 1 liter per 750 miles, then top the engine oil and return the vehicle
to the customer.
OR:
If the engine oil consumption is greater than 1 liter per 750 miles, then proceed to step 2.
For additional information on oil consumption refer to B11 03 13.
2. The vehicle has returned for the oil consumption measurement:
Copyright ©2023 BMW of North America, Inc.
about:blank
8/15
5/30/23, 1:34 PM
01 01 22_N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR
- Why Choose the 2026 CR MAX -Upgrade the latest diagnostic...
- Newst in Innovation Full Services - iCarsoft auto car...
- Up to 50 Reset Services - Performs: Oil Reset...
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR...
- Advanced ECU CODING: Unlock Your Vehicle's Full Potential...
- 【Looking for More Professional Vehicle Scan...
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E...
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E...
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is...
- 【118+ Real Time Record & Live Graph View】iCarsoft E...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B010122
Replacement Service Bulletin Number:
MFR Communication Date: 2023-05-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-07-08 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.