Technical Bulletin
Model(s)

Year

Eng. Code

Trans. Code

VIN Range
From

VIN Range To

Passat Wagon

2006 – 2010

All

All

All

All

Condition
55 14 11 December 16, 2014 2039197
Corrosion On Rear Lid Around Rear Lights

Figure 1: Example: rear lid when rear light is
installed

Figure 2: Example: rear lid when rear light is removed

Note:
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures
Manual.
Documentation required per Warranty Policies and Procedures Manual.
For vehicles outside of the Limited Warranty Against Corrosion Perforation this Technical Bulletin is for information
only.

Page 1 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Technical Background
The surface area of the rear lid becomes chafed from movements between the components.
Dirt between the rear lid surface and rear lights can cause paint damage (Figure 3).

Figure 3 Dirt on rear lights

Production Solution
Corrections in the production process after discovering deviations.

Page 2 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Service
Repair the rear lid (remove corrosion/restore paint structure).
Note:
This repair procedure should be performed on both sides of the rear lid.
• Remove the rear lights according to the repair manual. See Repair Group 94 in Elsa.
• Remove the necessary add-on parts from the rear lid according to the repair manual. See Repair Group 70 in
Elsa.
• Remove the corrosion with pneumatic brush grinder.
• Re-paint the rear lid according to Volkswagen guidelines.

Stick anti-chafing foils on the contact surfaces of the rear lights

Before installing the rear lights stick anti-chafing foils
on the contact surfaces in the rear lid (bottom and top,
Figure 4).

Figure 4 (contact surfaces in rear lid)

Page 3 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Cut out the anti-chafing foils per side from the part number: AKL 448 030 05 (Figure 5, red arrows)
• For top area: 1 x 7 cm long, 2 x 3 cm long, 1 x 4 cm long.
• For bottom area: 1 x 2 cm long, 2 x 3 cm long.
• Thoroughly clean the contact surface of the rear lights in the rear lid with silicon remover
• Stick on the cut-out foils (illustration 5, red arrows).

Note:
When applying the anti-chafing foil make sure that the edge to the outside is equal and is covered by the
rear lights.
• Install all removed parts according to the repair manual. See Repair Group 70 and 94 in Elsa.

Figure 5 Foil installation on right lift gate tail light surface.

Page 4 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
Warranty
Note:
• Dealers may complete the repair as described without prior authorization (through a WISE Warranty Repair
Acceptance request).
• Documentation required: Clear pictures, completed estimate and body shop invoice must be saved and kept on
file at the Dealership for audit purposes.
• Labor time units (TU), Material units (MU), and Material unit rate are correct at the time of publication. The time
units and/or material units may differ if the repair catalogue is updated. The information in the repair catalogue
applies, except for the open time items (labor operations ending in 99) which are calculated at actual time
multiplied by the body shop labor rate. The material allowance (Paint material price per unit) is subject to
change. Refer to WISE > Resource Center > Forms > Paint/Corrosion for the most current forms.
• This section is applicable for vehicles within the terms of Volkswagen’s Limited Warranty Against Corrosion
Perforation. For vehicles outside the terms of the Limited Warranty Against Corrosion Perforation this section is
for information only.
• This bulletin may be provided to outside shops to ensure the proper repair is completed.
Note:
Claim Processing Options
Option 1: Utilize the attached form examples and interactive forms on WISE to assist with calculating the
reimbursement amounts. This will expedite the claim review process and reduce the time to pay the claim.
Note that miscalculations are subject to claim adjustment.
For the complete set of pre-populated Paint/Corrosion Claim Form templates associated with this Technical
Bulletin, refer to WISE > Resource Center > Forms > Paint/Corrosion.
Option 2: Email repair estimates to paintcamp@vw.com. The Paint and Corrosion Team will calculate the
warranty allowance and complete the required form(s) on behalf of the dealer.

Page 5 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
1)
Procedures Manual
Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN Range From

VIN Range To

Passat Wagon

2006-2010

All

All

All

All

SAGA Coding
1)

Claim Type:

160

Damage
Service Number:

HST

Damage Location
(Depends on Service No.)

--

030

Code
5559

0003

Parts Manufacturer

Passat (3C5)

030

2)

Repair
Please use the following part number in “Outside Materials”

4)

LACKMATF: Paint and Materials

MU @ $12 per unit

Epoxy Primer (Locally Sourced)

Claim Dollar Amount (MAX: $40)

Please use the following Labor Operation in “Outside Labor”

4)

Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
Claim Dollar Amount
- L0020000: External Painting-metallic/2-layer
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Causal Part:

L00#0000
Diagnostic Time

4)

GFF Time expenditure

01500000 = 00 TU max.

NO

Road Test

01210002 = 00 TU

NO

Page 6 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Bulletin
01210004 = 00 TU
Technical Diagnosis

01320000 = 00 TU

NO

Claim Comment: Input “As per Technical Bulletin 2039197” in comment section of Warranty Claim.
1)

For Vehicles outside the Limited Warranty Against Corrosion Perforation this bulletin is information only

2)

Corrosion claim vendor code will be the damage location.

3)

Labor Time Units (TUs) are subject to change with ELSA updates.

4)

Documentation required per Warranty Policies and Procedures Manual.

5)

See attachment “srt_ref_table.pdf” for labor time reference.

Required Parts and Tools
Repair
Part No:

Part Description

Quantity

AKL 448 030 05

Anti-Chafing Foil

0.1

No Special Tools Required.

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.

Page 7 of 7 plus attachments
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Paint/Corrosion Claim Form

400000

Dealer No.
Repair
Order No.

910000

VIN (17-Digits)

3VWBA71K18M167634