Service Information
Number: VSE-13-15

Workshop Equipment
Subject: VW Minimum Required Tool Auto Shipment
AT-353 US and Canada

Date: September 3, 2013

VWGoA would like to inform you of the release and automatic delivery of required Special Tools which are
used on the all-new 1.8T, Gen III 2.0T, TDI, Jetta Hybrid and other vehicles.
Starting September 23, 2013, every VW dealer will be shipped one AT-353 Special Tool Package.
Freight F.O.B. Snap-On OEM and invoiced directly by the VW Special Tools Program (Snap-On Business
Solutions - SBS).
Dealers who wish to order additional AT-353 Special Tool Packages can notify the VW Tools and
Equipment Program by calling 800-892-9650. Orders will be filled in the order they are received.
Additional individual pieces of this package may be ordered from the VW Tools and Equipment program
after the automatic shipment takes place.
For shipping & billing inquiries, please contact the VW Tools and Equipment program @ 800-892-9650.
Franchise Type

Package Qty

Dealer Price USA

Dealer Price Canada*

VW

32 Tools

$1877.40

$1973.20 CDN*

VW/Audi Dual

11 Tools

$985.30

$1064.90 CDN*

Note * Canadian prices are subject to change. USD to CAD conversion will be calculated at time of
invoicing at the current rate. Canadian pricing also accounts for importation costs from US to Canada.

Page 1 of 6

ver1.3

© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
VW AT-353
Tool Description

Repair Group

T10172/11 – Couterhold Tool Adapter

Illustration

10 & 15

Used to hold camshaft belt pulley when servicing the TDI engine.
VW Exclusive
T10352/2 – Assembly Tool, Camshaft

15

Used for removal and installation of camshaft control valve of on
1.8 and 2.0 Gen 3 TFSI engine
VW Exclusive
T10353/1 – Seal Installer, Intermediate Shaft

15

Used to install intermediate shaft seal on 1.8 and 2.0 Gen 3 TFSI
engine.
VW Exclusive
T10356/7-8 – Assembly Tool

40 & 42

Used to remove and install sub-frame bushings on the MK 7 golf,
front-wheel and four-wheel drive.
VW Exclusive & VW/Audi Dual
T10359/3 – Adapter

10

Used in conjunction with VAG1383A to remove and install engine
on vehicles equipped with the 1.8 and 2.0 Gen 3 TFSI engine.
VW Exclusive
T10486A – Assembly Tool, Sub-frame Alignment

40

Used to keep alignment of the sub-frame during reassembly.
VW Exclusive

Page 2 of 6
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
T10489 – Puller

23

Used to remove the high pressure fuel pump sprocket on the TDI
engine.
VW Exclusive
T10490 – Crankshaft Lock

13

Used to lock crankshaft @ TDC when serving the 1.8 and 2.0 Gen
3 TFSI engine.
VW Exclusive
T10491 – Lambda Probe Socket

26

Used to remove and install the oxygen sensor on the TDI engine.
VW Exclusive

T10492 – Locking Pin

15 & 23

Used to lock the high pressure pump of the TDI engine during
removal/installation of the high pressure pump or timing belt.
VW Exclusive
T10493 – Assembly Tool

15

Used to remove and install the camshaft seal on the TDI engine.
VW Exclusive

T10501 – Socket Bit ZXN 10

23

Used to remove and install the intake manifold of the TDI engine.
VW Exclusive

T10504 – Camshaft Clamp

15

Used for locking camshaft on vehicle equipped with the 1.4TFSI
engine.
VW Exclusive & VW/Audi Dual

Page 3 of 6
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
T10511 – Assembly Aid

26

Used as an assembly aid when reinstalling DPF on the TDI
engine.
VW Exclusive
T10512 – Calibration Tool

26

Used to position the self-adjusting nuts when installing the
exhaust purification module on the TDI engine.
VW Exclusive
T10517 – Release Tool

68

Used to remove the new style fastener clips used to secure
headliner trim.
VW Exclusive & VW/Audi Dual
T10530 – Ignition Coil Puller

28

Used to remove the new “pencil” type ignition coil used on the1.8
and 2.0 Gen 3 TFSI engine.
VW Exclusive
T40073 – Wheel Lock Set

44

Master wheel lock set, used to remove new style “tamper
resistant” wheel security lock bolts.
VW Exclusive
T40093/3-6 – Adapter

10 & 34

Used in conjunction with T40093 to remove and install
transmission on various vehicles.
VW Exclusive & VW/Audi Dual

Page 4 of 6
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
T40138 – Release Tool

GFF & 9x

Used to disconnect difficult to reach electrical connectors on
various vehicles.
VW Exclusive
T40191 – Camshaft Spacer

15

Used to properly align camshafts when installing camshafts into
cylinder head on the 1.8 and 2.0 Gen 3 TFSI engine.
VW Exclusive
T40196 – Camshaft Adjuster Locks

15

Used to properly position cam adjusters when disassembling
cylinder head on the 1.8 and 2.0 Gen 3 TFSI engine.
VW Exclusive
T40265 – Locking Tool

15

Used to lock timing and oil pump chain tensioners on the 1.8 and
2.0 Gen 3 TFSI engine.
VW Exclusive
T40266 – Camshaft Adapter

15

Used to rotate and hold camshaft on the 1.8 and 2.0 Gen 3 TFSI
engine.
VW Exclusive
T40280 – Removal Tool

68

Used to remove trim fastened using the Omega clips.
VW Exclusive

Page 5 of 6
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Service Information
VAS5301/7 – Pressure Sensor Socket, 27MM

24

Used to remove the high pressure sensor G247 found on the 1.8
and 2.0 Gen 3 TFSI engine.
VW Exclusive & VW/Audi Dual
VAS5575 – Adapter, Electrical Test, Fakra Connector

GFF & 69

Used to connect multimeter or other test instrument when
diagnosing capacitive seat occupation detection faults.
VW Exclusive & VW/Audi Dual
VAS6762/10 – High Voltage Cable Covers

93 & GFF

Used to cover high voltage cables upon disconnecting from high
voltage components of Hybrid vehicles.
VW Exclusive & VW/Audi Dual
3282 – Transmission Support

10, 34, 37

Used to remove powertrain components per ELSA instructions
and in accordance with labor operations. Minimizes component
damage to transmission assembly and E machine.
VW Exclusive & VW/Audi Dual
3282/29 – Adapter Pin

10, 34, 37

Used to adapt 3282 to specific transmissions during the removal
process.
VW Exclusive & VW/Audi Dual
3282/66 – Transmission Jack Adjustment Plate.

10, 34 & 93

Used to properly set up 3282 for removal of 0CG transmission in
Jetta Hybrid.
VW Exclusive & VW/Audi Dual

Page 6 of 6
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.