NHTSA ID Number: 10235711
Manufacturer Communication Number: E290
TSB/Document Date: 2023-05-05
Summary
FIX-AS-FAIL â Updated procedures and claim filing information. EPA2021 injector cleaning is referenced in RMI for certain injector faults. Complete the procedures in E290. Refer to E300 for in-tank additive information.
4/3/23, 7:48 AM
Powertrain Service Bulletin
E290: EPA2021 PACCAR
MX Fuel Injector Cleaning Procedure
Number
Edit
Clone
E290
Subject
EPA2021 PACCAR
MX Engine Fuel Injector Cleaning Procedure
Date
3/31/2022
Revision
04/03/2023: Bulletin updated to clarify bulletin flow with RMI. Removed fuel filter element replacement steps in procedures. Added second cleaning cycle
if necessary. Removed in-tank additive information. Added quick claim for repairs on or after 04/03/2023. Added references to E300.
01/27/2023: Updated part number for Diesel Kleen additive.
01/04/2023: Revised in-tank fuel additives in Procedures section.
4/3/23, 7:48 AM
Powertrain Service Bulletin
12/16/2022: Removed John Deere additive from the recommended list.
09/26/2022: Updated Procedures diagram for before/after cleaning comparison of Unbalance Detection test results.
08/11/2022: Added in-tank cleaner information in the Procedure section.
07/22/2022: Removed Fleetguard
Diesel Fuel Injector Cleaner option from in-tank additive table.
06/15/2022: Edited parts and tool tables. Added in-tank additive recommendation.
06/03/2022: Adjusted cleaning solutions. DSG 4+ is now available from PPD for US use. John Deere is no longer listed as an alternate.
05/23/2022: Adjusted preferred order of cleaning solutions: DSG 4+ is now preferred while John Deere is an alternate.
05/16/2022: Removed "disconnect aftertreatment system" step in procedures. Updated SRT codes and parts lists.
04/28/2022: Removed Stanadyne cleaning solution. Stanadyne #43566 is not to be used as a cleaner for this procedure.
04/22/2022: Added secondary tool kit part number. Adjusted preference for cleaning fluids. Removed mileage limit for affected chassis.
04/13/2022: Updated the Parts section to include an alternative fuel system cleaning tool kit.
04/07/2022: Updated contact information for DSG ordering.
04/04/2022: Updated parts section and procedures document.
Condition
Chassis affected may experience one or more of the following DTCs or symptoms;
Engine Knock
P3300
P0300
P0301, P0302, P0303, P0304, P0305, P0306
P1263, P1266, P1269, P1272, P1275, P1278
P0263, P0266, P0269, P0272, P0275, P0278
Chassis Affected
All Model Year 2021 and later Model 389, 520, 567, 579, and 579 MLU chassis equipped with EPA2021 compliant PACCAR
MX-11 and MX-13 engines.
Action
Fix-As-Fail
https://paccarnet.sharepoint.com/sitepages/pwrtrnsvcbltin.aspx?ctx=eyJ3ZWJVcmwiOiJodHRwczovL3BhY2Nhcm5ldC5zaGFyZXBvaW50LmNvbS9zaXRlcy9hdXRob3JzZXJ2aWNlIiwibGlzdElkIjoiNmF… 2/12
4/3/23, 7:48 AM
Powertrain Service Bulletin
If a customer comes into your dealership and demonstrates the condition above, refer to RMI for troubleshooting procedures for specific fault codes.
Complete the procedures attached below for injector cleaning.
1. Check SIR for “complete” next to E290A. The vehicle SIR is also available in .pdf format under “Attachments” in Service Management. If “complete”
shows next to E290A, the cleaning has been previously performed. See warranty section for filing instructions on vehicles that require additional cleaning.
2. If E290A does not appear in SIR, check the Asset Service History under the Asset Profile in Service Management to ensure another dealer has not
recently completed the repair.
3. When completing this cleaning, make sure to manually enter E290A in a new operation line in Service Management when starting repairs to ensure
the repair is tracked properly.
4. Print the E300 Driver’s Information Packet (attached below) and fill in the warranty end date and mileage information on the first page for the chassis.
Refer to E300 for specific limitations of in-tank additive reimbursement.
•Check the vehicle in SIR to determine end date and mileage of any applicable engine warranty. The warranty start date is the vehicle “In Service”
date.
Warranty
4/3/23, 7:48 AM
Powertrain Service Bulletin
Through Base Warranty or any applicable active Extended Warranty, Peterbilt
will pay for parts at dealer net plus applicable mark-up and labor:
Campaign and SRT Codes
Quick
Claim
Code
SRT Code
Labor
Hours
Use
NONE
B44-FSD
3.1
Repairs completed BEFORE 04/03/23
E290A1
B23-04A
1.8
Repairs completed on or after 04/03/23
– Cleaning performed ONCE
B23-04B
3.0
Repairs completed on or after 04/03/23
– Cleaning performed TWICE in same
service event.
Editable
Repairs completed on or after 04/03/23
–Includes 2 cleanings AND injector
Editable replacement in the same service event.
Injector replacement (up to 6 injectors)
may only be claimed ONCE.
B23-04C
1.0
Repairs completed on or after
04/03/2023 - Cleaning performed ONCE
- Only applies to MY2023 chassis with
NA31 RC1 software - See procedures for
details.
1.6
Repairs completed on or after
04/03/2023 - Cleaning performed
TWICE in same service event. - Only
applies to MY2023 chassis with NA31
RC1 software - See procedures for
details.
1.8
Subsequent claim for secondary
cleaning on vehicles with E290A
“Complete” – Cleaning performed
ONCE in second service event
Subsequent claim for secondary
cleaning on vehicles with E290A
“Complete” – Cleaning performed
TWICE in second service event
E290A2
E290A3
E290A4
E290A5
E290B1
B23-04D
B23-04A
E290B2
B23-04B
3.0
E290B3
Editable
Editable Subsequent claim for secondary
cleaning on vehicles with E290A
4/3/23, 7:48 AM
Quick
Claim
Code
Powertrain Service Bulletin
SRT Code
Labor
Hours
Use
“Complete” – Includes 2 cleanings AND
injector replacement in second service
event. Injector replacement (up to 6
injectors) may only be claimed ONCE.
Only applies if injectors have not been
previously replaced under E290A
E290B4
E290B5
B23-04C
B23-04D
1.0
Subsequent claim for secondary
cleaning on vehicles with E290A
“Complete” – Cleaning performed ONCE
in second service event - Only applies to
MY2023 chassis with NA31 RC1
software - See procedures for details.
1.6
Subsequent claim for secondary
cleaning on vehicles with E290A
“Complete” – Cleaning performed
TWICE in second service event. - Only
applies to MY2023 chassis with NA31
RC1 software - See procedures for
details.
For repairs completed before 04/03/2023:
• File a long form claim for applicable repair parts (listed below) and 3.1 hrs labor using SRT code B44-FSD. This claim includes filter element
replacement.
For repairs completed on or after 04/03/2023:
• 1.8 hours labor to perform the attached cleaning procedure ONCE in the same service event – according to the attached procedure. Use
appropriate quick claim code from the table above. This quick claim does NOT include filter element replacement.
• 3.0 hours labor to perform the attached cleaning procedure TWICE in the same service event – according to the attached procedure. Use
appropriate quick claim code from the table above. This quick claim does NOT include filter element replacement.
• 1.0 hours labor to perform the attached cleaning procedure ONCE in the same service event - according to the attached procedure on
MY2023 chassis with NA31 RC1 software. Use appropriate quick claim code from the table above. This quick claim does NOT include filter element
https://paccarnet.sharepoint.com/sitepages/pwrtrnsvcbltin.aspx?ctx=eyJ3ZWJVcmwiOiJodHRwczovL3BhY2Nhcm5ldC5zaGFyZXBvaW50LmNvbS9zaXRlcy9hdXRob3JzZXJ2aWNlIiwibGlzdElkIjoiNmF… 5/12
4/3/23, 7:48 AM
Powertrain Service Bulletin
replacement.
• 1.6 hours labor to perform the attached cleaning procedure TWICE in the same service event - according to the attached procedure on
MY2023 chassis with NA31 RC1 software. Use appropriate quick claim code from the table above. This quick claim does NOT include filter element
replacement.
NOTE
This bulletin covers the injector cleaning ONLY.
The attached procedures require an editable claim to cover parts
(injectors) and any labor associated with injector replacement and
additional troubleshooting (if necessary).
Use appropriate quick claim code from the table above in the campaign
code field of this claim.
• If the vehicle has previously completed E290A and requires another cleaning in a second service event, file an additional claim using the
appropriate quick claim code from the table above in the Campaign Code Field.
• For extraordinary circumstances, please use code E290. Add from "Recommended Repairs", then select the gear icon to edit Parts/Labor/Misc.
• File the claim within 14 days in accordance with the Warranty Policy.
Peterbilt
dealers may perform E290A repairs on Kenworth
chassis, but Quick Claims do not apply. For Kenworth
chassis repairs, use the long claim
4/3/23, 7:48 AM
Powertrain Service Bulletin
input form.
PRWS CLAIM CODING
Campaign
Code:
E290A
Claim
Category:
Engine Repair Type:
Fix-As-Fail
Customer
Concern
Code:
202
Causal Code:
64
Corrective
Action
Code:
02
Responsibility
CAMP
Code:
Failure
Location:
044002002
Causal Part:
2272926
N/A
SRT Code:
B44-FSD (3.1 hrs)
Injector cleaning procedure
before 04/03/2023
Supplier
Code:
Campaign
Type:
Field Repair
B23-04A (1.8 hrs)
Injector cleaning procedure (1x)
on or after 04/03/2023 (without
filter element replacement)
B23-04B (3.0 hrs)
Injector cleaning procedure (2x)
on or after 04/03/2023 (without
filter element replacement)
B23-04C (1.0 hrs.)
Injector cleaning procedure (1x)
on or after 04/03/2023 (without
4/3/23, 7:48 AM
Powertrain Service Bulletin
filter element replacement) on
MY2023 with NA31 RC1 software.
B23-04D (1.6 hrs.)
Injector cleaning procedure (2X)
on or after 04/03/2023
(without filter element
replacement) on MY2023
with NA31 RC1 software.
Parts
Tools and parts are available from PACCAR
parts. Tool kits are not reimbursable through this bulletin. Repair parts are only authorized for repairs on
4/3/23, 7:48 AM
Powertrain Service Bulletin
or before the dates listed.
TOOLS
Quantity
1
Part Number
Description
2281101
Fuel System Cleaning Tool Kit
OR
1
1961366-1CH
Fuel System Cleaning Tool Kit
Only one of the above tool kits is necessary. Tool Kits listed above do
NOT include 5L container. A locally sourced container will be needed for
US locations.
1
5L container or clean bucket. Available
through Dynalon or Amazon
Locally Sourced
REPAIR PARTS
Quantity
5qt
1
Part Number
DK32P (for US use)
Description
DSG 4+ Super Clean #DK32
(Preferred solution available from PPD
for US use)
2281100PE (Canada Tunap FX9 (5qt container for Canada use
Only)
Only)
The following parts only apply to repairs completed before 04/03/23
1
2272926
Filter Set
The following parts only apply to repairs completed before 05/17/2022
(1)
A029E744
Gasket
(1)
Q312526
Gasket
(1)
LP34216
Clamp, 5"
(1)
90-0012
Clamp, 4"
Background
The diagnostic codes and injector problems may be caused by carboxylate clogging of injector internal ports. This cleaning procedure should clean
4/3/23, 7:48 AM
Powertrain Service Bulletin
the deposits, but it is not a permanent fix. If the problem returns, switching fuel sources may reduce the formation of deposits.
Procedure
Please follow your dealership's safety procedures and precautions to ensure the vehicle can be safely repaired and maintained. Read all steps before
beginning.
Please ensure you are using the latest version of the attached procedure. Please discard any printed versions you may have and refer to the bulletin link
below each time.
This procedure is in addition to other diagnostic and troubleshooting steps as specified in RMI or other service documentation and repair direction from
10/12
4/3/23, 7:48 AM
Powertrain Service Bulletin
field service or the Vehicle Support Center.
NOTE
If the vehicle has already had E290A completed and requires the cleaning
again, contact the Vehicle Support Center (TCS365) for direction.
File claims for additional work using appropriate quick claim code from
table in warranty section of bulletin.
1. RMI will refer you to this procedure for any active fault codes listed above.
2. Complete the attached cleaning procedure.
EPA2021 MX13 MX11 Fuel Injector Cleaning Procedure
NOTE
On MY2023 vehicles, check component group 1020. If software number
is 2397180, the vehicle has NA31 RC1 software. Do not perform injector
calibration on these vehicles. See Software Change Notice RC1 for Model
Year 2023 for more information.
3. Refer to E300 for in-tank additive use and reimbursement of additive cost.
A. Print the Driver’s information Packet (below)
B. Fill in the Chassis number and warranty expiration date/mileage.
C. Explain to the customer what they need to do and the expiration date/mileage that they need to meet.
D. Give the Driver’s Information Packet with the expiration information filled in to the driver.
E. Advise the driver that the log sheet is necessary for in-tank fuel additive reimbursement through E300 through their local dealer.
Links
E290 Fuel Injector Cleaning Procedure
E300 Driver Information Packet
https://paccarnet.sharepoint.com/sitepages/pwrtrnsvcbltin.aspx?ctx=eyJ3ZWJVcmwiOiJodHRwczovL3BhY2Nhcm5ldC5zaGFyZXBvaW50LmNvbS9zaXRlcy9hdXRob3JzZXJ2aWNlIiwibGlzdElkIjoiNm…
11/12
4/3/23, 7:48 AM
Powertrain Service Bulletin
E300 Fuel System Additives Bulletin
12/12
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: E290
Replacement Service Bulletin Number:
MFR Communication Date: 2023-04-03
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




