NHTSA ID Number: 10232449
Manufacturer Communication Number: No. 193-22
TSB/Document Date: 2023-03-04
Summary
Technical information - Check Engine Warning Light Active / Fault Memory Entry "P26B100/00CB24" in the Thermal Management Control Unit (TME):
Service
Technical Information
193/22 ENU
8274
8
Check Engine Warning Light Active / Fault Memory Entry "P26B100/00CB24" in the
Thermal Management Control Unit (TME): Re-Programming Control Unit (193/22)
Revision:
This bulletin replaces bulletin Group 8 193/22, dated September 23, 2022.
Model Year:
As of 2020 up to 2021
Vehicle Type:
Cayenne E-Hybrid
(9YA)/Cayenne E-Hybrid Coupé (9YB)/Cayenne Turbo S E-Hybrid
(9YA)/Cayenne Turbo S E-Hybrid Coupé (9YB)
Equipment:
Emissions concept PL7 with alternative. OBD (M No. 0GB)
Emissions concept LEV3 / TIER3 70 (M No. 7CE)
Emissions concept LEV3 / TIER3 125 (M No. 7MU)
Emissions concept C6B w/o RDE (M No. 7CM / 4BD)
Emissions concept C6B w/ RDE (M No. 7CR)
Concerns:
Thermal management control unit (TME)
Information:
•
•
Customers complain that the Malfunction Indicator Lamp (MIL)/ Check Engine Light is on in the
instrument cluster.
The fault memory entry “Directional-control valve for high-temperature circuit – function implausible
(P26B100/00CB24)” is set in the thermal management control unit (TME).
Action required: In the event of a customer complaint and if a fault memory entry is set in the thermal management control
unit (TME), the software version of the thermal management control unit (TME) must be checked and
re-programmed if necessary using the PIWIS Tester with PIWIS Tester software version 41.750.0046
(or higher) installed.
Required tools
Tool:
•
•
•
Battery charger with a current rating of at least 90 A, e.g. VAS 5908 battery charger 90A. For
further information about the battery chargers to be used, see the corresponding Workshop Manual.
Workshop Manual '270689 Charging vehicle electrical system and battery'
9900 - PIWIS Tester 3 with PIWIS Tester software version 41.750.046 (or higher) installed
9900 - PIWIS Tester 4 with PIWIS Tester software version 41.750.046 (or higher) installed
Preparatory work
NOTICE
Fault entry in the fault memory or control unit programming aborted, as the case may be, due to low voltage.
•
Increased current draw during diagnosis or control unit programming can cause a drop in voltage, which
can result in one or more fault entries and the abnormal termination of the programming process.
AfterSales
Feb 28, 2023
Page 1 of 4
8
Service
8274
Technical Information
ENU 193/22
Before commencing work, connect a suitable battery charger with a charging current of at least 90 A to
the jump-start terminals in the engine compartment.
NOTICE
Control unit programming will be aborted if the Wi-Fi connection is unstable.
•
An unstable Wi-Fi connection can interrupt communication between the PIWIS Tester II and the vehicle
communication module (VCI). As a result, control unit programming may be aborted.
During control unit programming, always connect the PIWIS Tester to the vehicle communication module
(VCI) via the USB cable.
NOTICE
Control unit programming will be aborted if the driver’s key is not detected.
•
If the driver’s key is not detected in the vehicle, programming cannot be started or will be interrupted.
Place the driver’s key with the back facing down into the front left storage compartment in the center
console to ensure a continuous radio link between the vehicle and the driver‘s key.
Work Procedure: 1
Carry out general preliminary work for control unit programming as described in Workshop
Manual '9X00IN Basic instructions and procedure for control unit programming – chapter on
“Preliminary work”'.
Check software version of the thermal management control unit (TME)
Work Procedure: 1
Feb 28, 2023
Page 2 of 4
Check software version of the thermal management control unit (TME).
1.1
Select ‘thermal management control unit (TME)’.
1.2
Select the ‘Extended identifications’ menu.
1.3
Checking software version of ‘thermal management control unit’ (TME).
1.3.1
If the software version is '0305' (or higher), the TME control unit is already
up-to-date, and the fault must otherwise be found and corrected. Continue with
Technical Information '9X00IN Concluding work'.
1.3.2
If the software version is earlier than '0304', re-program the thermal management
control unit (TME). Technical Information '9X00IN Re-programming thermal
management control unit (TME)'
AfterSales
Service
Technical Information
193/22 ENU
8274
8
Re-programming thermal management control unit (TME)
Information
The procedure described here is based on the PIWIS Tester 3 software version 41.750.046.
The PIWIS Tester instructions take precedence and in the event of a discrepancy, these are the
instructions that must be followed. Deviations may occur with later software versions, for example.
Work Procedure: 1
The basic procedure for control unit programming is described in the Workshop Manual
Workshop Manual '9X00IN Basic Instructions and Procedure for Control Unit Programming Using the
PIWIS Tester'.
For specific information on control unit programming during this campaign, see table
below.
Required PIWIS Tester software version:
41.750.046 (or higher)
Type of control unit programming:
Control unit programming using the 'Campaign'
function in the additional menu on the PIWIS
Tester by entering a programming code.
Programming code:
E3T8E
Programming sequence:
Read and follow the information and instructions
on the PIWIS Tester during the guided
programming sequence.
Do not interrupt programming and coding.
A backup documentation process for the
re-programmed software versions starts as soon
as programming and coding is complete.
Programming time (approx):
3 minutes
Software version programmed during this
campaign:
•
Thermal management control unit (TME):
0305
Following control unit programming, the software
version can be read out from the relevant control
unit in the ‘Incremented identifications’ menu
using the PIWIS Tester.
AfterSales
Feb 28, 2023
Page 3 of 4
8
Service
Technical Information
ENU 193/22
8274
Procedure in the event of error messages
appearing during the programming sequence:
Workshop Manual '9X00IN Basic instructions
Procedure in the event of a termination in the
control unit programming:
Repeat control unit programming by restarting
programming.
and procedure for control unit programming using
the PIWIS Tester - section on “Fault finding”'.
Concluding work
Work Procedure: 1
Carry out general rework for control unit programming as described in Workshop Manual '9X00IN
Basic instructions and procedure for control unit programming using the PIWIS Tester - section on
“Rework”'.
Invoicing
For documentation and invoicing in the event of a warranty, state the work items required depending on
the scope of work and the specified PCSS encryption in the warranty claim:
APOS
Labour operation
I No.
19290101
Checking thermal management control unit
19292551
Programming thermal management control unit
PCSS encryption:
Location (FES5)
82740
Directional-control valve
Damage type (SA4)
1611
does not function
References:
Workshop Manual '9X00IN Basic instructions and procedure for control unit programming using the
PIWIS Tester'
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2023 Porsche Cars North America, Inc.
Feb 28, 2023
Page 4 of 4
AfterSales
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: No. 193-22
Replacement Service Bulletin Number:
MFR Communication Date: 2023-02-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.