NHTSA ID Number: 10232397
Manufacturer Communication Number: No. 126-20
TSB/Document Date: 2023-03-04
Summary
Technical information for a complaint - error message "engine control system fault" when brake pedal is pressed slightly. Vehicle still moves normally.
Service
Technical Information
126/20 ENU
2470
2
Complaint: Error Message “Engine Control System Fault” When Brake Pedal is Pressed
Slightly - Vehicle Can Still be Moved Normally (126/20)
Vehicle Type:
Cayenne E-Hybrid
(9YA/9YB)
Model Year:
As of 2019 up to 2023
Equipment:
Emissions concept ULEV70
Emissions concept ULEV125
Concerns:
DME control unit
Information:
The error message “Engine control system fault” appears in the instrument cluster and the
fault memory entry “P057200 - Brake light switch – short circuit to ground” is stored in the fault
memory of the DME control unit.
Cause:
When the brake pedal is pressed slightly, disparate braking information may be supplied, which will result
in an error message. The distance sensor in the brake booster detects that the brake is pressed, while
the brake light switch indicates that the brake is not pressed.
Action required: In the event of a customer complaint and if the fault memory entry “P057200 - Brake light switch – short
circuit to ground” is stored, re-program the ‘engine electronics (DME)’ control unit.
Information
The total time required for control unit programming is approx. 12 minutes.
Required tools
Tool:
•
•
9900 - PIWIS Tester 3/ 4 with PIWIS Tester test software version 41.600.020 (or higher) installed
Battery charger with a current rating of at least 90 A, e.g. VAS 5908 battery charger 90A.
Preparatory work
NOTICE
Fault entry in the fault memory and control unit programming aborted due to low voltage.
•
Increased current draw during diagnosis or control unit programming can cause a drop in voltage, which
can result in one or more fault entries and the abnormal termination of the diagnostic process.
Before starting control unit programming, connect a suitable battery charger with a current rating of at
least 90 A to the vehicle.
AfterSales
Feb 13, 2023
Page 1 of 5
2
Service
Technical Information
ENU 126/20
2470
NOTICE
Control unit programming will be aborted if the WLAN connection is unstable.
•
An unstable WiFi connection can interrupt communication between the PIWIS Tester and the vehicle
communication module (VCI). As a result, control unit programming may be aborted.
During control unit programming, always connect the PIWIS Tester to the vehicle communication module
(VCI) via the USB cable.
NOTICE
Control unit programming will be aborted if the driver's key is not recognized
•
If the driver's key is not recognized in the vehicle, control unit programming cannot be started or will be
interrupted.
Position the driver's key in the rear area of the left cupholder in the center console between the holding
struts (emergency start tray) in order to guarantee a permanent radio link between the vehicle and
driver's key.
NOTICE
Use of a PIWIS Tester test software version that is older than the prescribed version
•
Measure is ineffective
Always use the prescribed version or a higher version of the PIWIS Tester test software for control unit
programming and coding.
Work Procedure: 1
Position the driver key in the rear area of the left
cupholder in the centre console between the holding
struts (emergency start tray) in order to guarantee a
permanent radio link between the vehicle and driver
key Emergency start tray.
2
Carry out general preliminary work for control unit
programming as described in Workshop Manual
'9X00IN Basic instructions and procedure for control
unit programming using the PIWIS Tester - section on
“Preliminary work”'.
Emergency start tray
Re-program DME control unit
Work Procedure: 1
Feb 13, 2023
Page 2 of 5
The basic procedure for programming a control unit is described in the Workshop Manual
Workshop Manual '9X00IN Basic instructions and procedure for control unit programming using the
PIWIS Tester - section on “Programming”'.
AfterSales
Service
Technical Information
126/20 ENU
2470
2
Specific information on control unit programming in the context of this Technical Information:
Required PIWIS Tester software version:
41.600.020 (or higher)
Type of control unit programming:
Control unit programming using the ‘Automatic
programming’ function for the DME control unit:
‘Engine electronics (DME)’ control unit –
‘Coding/programming’ menu – ‘Automatic
programming’ function.
Read and follow the information and instructions
on the PIWIS Tester during the guided programming
sequence.
During the programming sequence, the DME control
unit is re-programmed and then automaticallyrecoded.
Programming sequence:
Do not interrupt programming and coding.
Once the control units have been programmed and
coded, you will be prompted to switch the ignition off
and then back on again after a certain waiting time.
Backup documentation of the new software versions is
then performed.
The programming sequence takes (approx.):
12 minutes
Data record (software part number and
software version) programmed for the DME
control unit during programming:
See Technical Information '9X00IN Overview of the
programmed software versions'.
Procedure in the event of abnormal termination of control unit programming:
• Switch ignition off and then on again.
• Read out and erase the fault memory Workshop
Manual '9X00IN Basic instructions and procedure
for control unit programming using the PIWIS Tester “Rework” section'.
• Repeat control unit programming by restarting
programming.
Procedure in the event of other error
messages appearing during the
programming sequence:
Workshop Manual '9X00IN Basic instructions and
procedure for control unit programming using the
PIWIS Tester - section on “Troubleshooting”'.
AfterSales
Feb 13, 2023
Page 3 of 5
2
Service
Technical Information
ENU 126/20
2470
Overview of the programmed software versions
Information
The software part number and software version of the programmed data record are based on the
specified PIWIS Tester test software version. Please note that these may have changed in a higher
version.
Exhaust
emission
standard
Model year
2019 (K)
2020 (L)
2021 (M)
2022 (N)
2023 (P)
-
-
x
x
x
-
x
-
-
-
ULEV70
ULEV12
5
Control
unit
Software part
no.
Software
version
DME
9Y0907
559AB
0006
DME
9Y0907
559R
0001
Concluding work
Work Procedure: 1
Carry out general reworking for control unit programming as described in Workshop Manual
'9X00IN Basic instructions and work procedure for control unit programming using the PIWIS Tester “Reworking” section'.
Invoicing
Invoicing:
For documentation and warranty invoicing, enter the labor operations and PQIS coding specified below in
the warranty claim:
APOS
Labour operation
I No.
24702507
Re-programming DME control unit
PQIS coding:
Location (FES5)
24700
DME control unit
Damage type (SA4)
1134
Programming error
References:
Workshop Manual '9X00IN Basic instructions and procedure for control unit programming using the
PIWIS Tester'
Feb 13, 2023
Page 4 of 5
AfterSales
Service
Technical Information
126/20 ENU
2470
2
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2023 Porsche Cars North America, Inc.
AfterSales
Feb 13, 2023
Page 5 of 5
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock...
- Ideal for hydraulic and disc brakes
- Provides an extra margin of safety in extreme braking...
- Mix of polyglycol ethers ensures hot brake-system operation...
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy...
- Both wet and dry boiling points exceed the minimum...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: No. 126-20
Replacement Service Bulletin Number:
MFR Communication Date: 2023-02-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.