Complaints About Noises or Poor
Windshield Wiper Wiping Performance
Topic number

LI82.30-P-059239

Version

12

Function group

82.30 - Windshield wipers

Date

2/13/23

Validity

All passenger car model series

Reason for change

Validity updated

Complaint
There are several types of complaint about noises or poor windshield wiper wiping performance:
A: Wiper blades squeaking
B: Wiper blades shuddering
C: Windshield not completely wiped (streaking)
D: During downward movement, water is pulled back onto the windshield from the A-pillar (picture 1)
E: After windshield cleaning, water keeps spraying onto the windshield for several wipe cycles (picture 2)

Attachments
File

Description

Bild 1.JPG

During the Downward Movement Water is Pulled Back
onto the Windshield from the A-pillar

Bild 2.JPG

After Windshield Cleaning, Water Keeps Spraying onto
the Windshield for Several Wipe Cycles

13.02.2023 15:56:56
© Copyright Mercedes-Benz AG

RROWELL

Page 1 / 6

Bild 3.JPG

Streaking Due to Excessive Downforce of the Wiper Arm

Cause
Cause A:
13.02.2023 15:56:56
© Copyright Mercedes-Benz AG

RROWELL

Page 2 / 6

A1: The windshield and wiper blades are contaminated with residues from car washing facilities, identifiable by the
water beading. The resulting differences in the
friction values between the wiper blades and the windshield can excite the wiper blades to vibrate.
Note: It is mostly wax residue from the washer system, but also water-repellent nano-particle coating for paint and/or
silicone-based washer fluid, that could cause this problem. A partially dry windshield
also has different friction values, which can likewise result in squeaking of the wiper blades
A2: The wiper blades are worn by mechanical damage (wiper lip damaged by ice or insect debris, or deformed by
long periods of disuse).
A3: Incorrect angle of incidence of the wiper arms to the windshield. Because of this, the rubber lip of the wiper blade
may not flip over at the reversal point.
Cause B:
B1: Wiper blades wear because of mechanical damage (wiper lip damaged by ice, insect remains or deformed by
long periods of disuse)
B2: Incorrect angle of incidence of wiper arms to windshield. Because of this, the rubber lip of the wiper blade may not
flip over at the reversal point.

Cause C:
C1: Wax/dirt residue on the windshield
C2: Wiper blades deformed or worn
C3: Clamping force of wiper arm not OK (picture 3)

Cause D:
Water is pulled back onto the windshield by the differential pressure created as the wiper arm moves downwards.

Cause E:
Washer water collects in the fastening of the wiper blade and is blown onto the windshield by the airstream over several wipe cycles.

Note and supporting information: Wiper blades are wear parts which, even when "not used" for long periods (kept in
park position), may become permanently deformed and damaged. Further stresses on the rubber wiper blade arise
due to various environmental influences which progressively change the effectiveness of the rubber wiper blade and
accelerate the aging process. Due to the natural aging process and wear, the wiper blades should be replaced twice a
year, preferably in Spring and Fall (see operator's manual).

Attachments
File

Description

Video 1.mp4

TEST

13.02.2023 15:56:56
© Copyright Mercedes-Benz AG

RROWELL

Page 3 / 6

Remedy
Remedy A:
A1: Cleaning entire windshield with A 000 986 40 71.
A2: Checking water's flow behavior after windshield has been cleaned (see video 1). If, after cleaning, there are still
areas with water beading, then the cleaning process must be carried out again until a rejection reaction is no longer
present.
Note: On the vehicle in the video (video 1), water still beads on the bottom left of the windshield. The windshield is still
not properly clean, even though it appears to be clean.
The windshield is only properly clean when there are no more areas on the windshield where water beads.
A3: Replace wiper blades with genuine wiper blades.
Important: Only exchange wiper blades if windshield no longer has water-repellent areas
Remedy B:
B1: Check wiper blades and replace if necessary.
B2: Check adjustment angle of wiper blades and correct if necessary.

Remedy C:
C1: Clean windshield with intensive cleaner A 000 986 40 71. Important: Do not clean the wiper blades otherwise the
graphite coating will be damaged.
C2: Replace wiper blades with genuine wiper blades
C3: Check wiper arm for sluggishness in the bearing. Restore mobility or replace wiper arm if necessary.

Remedy D:
Problem inherent in design for which there is no technical remedy.
Exception: X204 up to 02/2014. In these vehicles it is possible to install the design configuration of vehicles as of
02/2014. This includes wiper arms (styled arms) with improved behavior in this respect. It is also necessary to replace
the wiper blades because the styled arms feature a Top Lock connection (previously Side Lock). When installing the
passenger-side wiper arm, observe the new park position (21 mm) via the marking on the windshield (Figure 4).
Notes: The costs for this conversion must be borne by the customer. It is not possible to enter the modification in the
vehicle data card. The customer must therefore be advised that, when procuring replacement parts, wiper blades for
the X204 as of 02/2014 must be ordered in future.
Remedy E:
Problem inherent in design for which there is no technical remedy.
Exception: Model series 204 C-Class and model series 207. On these vehicles the wiper blades of the model series
212 can be used to improve the situation.

13.02.2023 15:56:56
© Copyright Mercedes-Benz AG

RROWELL

Page 4 / 6

Note: - Check and adjustment tools case for windshield wiper systems, see SI82.30-P-0004A
- Wipe quality and noise behavior, see SI82.35-P-0002A
- Windshield wipers" - W&G policies, see SI82.30-P-0010A
If problems continue to occur in isolated cases even after the criteria described above are taken into account, we
would ask you to contact us in order to discuss further details and courses of action.

Attachments
File

Description

Bild 4.JPG

Park position of tip of blade on X204 passenger-side wiper arm with Top Lock

WIS-References
Document number

Title

Note

SI82.30-P-0004A

Check and adjustment tools case for
windshield wiper systems

SI82.35-P-0002A

Wipe quality and noise development

SI82.30-P-0010A

Warranty and goodwill policies for wiper blades

Symptoms
Overall vehicle > Cleaning system > Windscreen wiper > Rubs/grabs
Overall vehicle > Cleaning system > Windscreen wiper > Too loud
Overall vehicle > Cleaning system > Windscreen wiper > Wiper arm deformed/broken

Parts
Part number

ES1 ES2 Designation

Quantity Note

EPC

A0009864071

Windshield cleaner

1

The windshield cleaner must not come into contact with plastic or painted parts otherwise they could be damaged.

X

A2048201644

Left wiper arm

1

Left wiper arm with Top Lock (Only
for X204 up to 02/2014 when retrofitted, standard as of 02/2014)

X

A2048201744

Right wiper arm

1

Right wiper arm with Top Lock (Only
for X204 up to 02/2014 when retrofitted, standard as of 02/2014)

X

A2048201400

Wiper blades parts kit

1

Parts kit for wiper blades with Top
Lock. (Only for X204 up to 02/2014

X

13.02.2023 15:56:56
© Copyright Mercedes-Benz AG

RROWELL

Page 5 / 6

when retrofitted, standard as of
02/2014)
A2128201700

Wiper blades parts kit, LHD

1

For D complaints in model series 204
C-Class and model series 207

X

A2128201800

Wiper blades parts kit, RHD

1

For D complaints in model series 204
C-Class and model series 207

X

Operation numbers/damage codes
Op. no.

Operation text

13.02.2023 15:56:56
© Copyright Mercedes-Benz AG

Time

RROWELL

Damage
code

Note

Page 6 / 6