Loading...

NHTSA ID Number: 10232145

Manufacturer Communication Number: TS30-FM-2301

TSB/Document Date: 2023-02-28


Summary

Describes the replacement of label


SERVICE BULLETIN
Subject: Brake Pedal Label Change

Bulletin Type: FM

Bulletin No: TS30-FM-2301

PQR No: 500000007182

Rev No: 00

Ref. No: 000700004155

Vehicle Model: TS 30

Flat Rate Time / Code: 30 min.

Date of issue: 17.01.2023

Modify Before: 17.01.2024

What to do with off coming parts:

What to do with outstanding parts of
previous revision:

Scrap
☐Return
☐Use with additional parts
☐On consignment
☐No off coming parts

☐Scrap
☐Return
☐Use with additional parts
☐On consignment
No outstanding parts

Description of the modification:
This service bulletin describes how to replace the brake pedal switch label. The reason for the
change is that the label information of TS30 EPA21 vehicles is incorrect.

Bulletin Responsible: Mehmet Ali Kaysanık

Published & Approved By: Gökhan Avcılar

SERVICE BULLETIN
SAFETY INSTRUCTIONS
1. Mechanical Requested Dress Code
WARNING:
➢ Dress properly to avoid personal injury and damage to the
vehicle
✓ Always wear protective clothing
✓ Do not wear any worn or loose-fitting clothing
✓ Remove jewelry before starting to work
✓ In case of long hair, use hairnet
✓ The illustration on the left shows some of the correct and
incorrect clothing

2. Protect Seats when Mechanic Starts Working

✓ Seats, trimming, upholstery stuff and carpeting should be
protected with appropriate coverings.

3. Welding on the Chassis

a) Always disconnected the batteries. (Starting with the negative pole)
b) Disconnect the connectors of electrical and electronic equipment (electronic control units, sensors
and actuators) if they are less than 2 meters away from the chassis part to be welded or grounding
line of welding equipment.
c) Disconnect engine and vehicle.
d) Grounding line must never be connected to vehicle components such as engines, axles and springs.
To avoid risk of damaging parts such as bearings or springs, arc formation must not be allowed on
these parts.
e) Grounding line must take good contact and be placed as close as possible to part to be welded.
f)

Plastic pipes, rubber parts and parabolic springs should be well protected against welding spatter
and temperatures higher than 70C.

g) Ignition key should be removed.
h) Reconnect in reversed order of disconnecting. Ensure that a good grounding line is made between
chassis, engine and cover.

SERVICE BULLETIN
Excluded Parts List
No.

1

Part Number

9050-634Y

Part Name

Picture

Qty

Unit

1

Pcs.

Qty

Unit

1

Pcs.

LABEL, BRAKE
PEDAL SWITCH, TS
30 E

Included Parts List
No.

1

Part Number

9050-994Y

Part Name

LABEL, BRAKE
PEDAL SWITCH

Picture

SERVICE BULLETIN

OPERATION STEPS
Prepare the vehicle for the application

Prepare the hand tools and parts

Step 1

START
Open the cover under driver.

Step 2

Remove label.

Step 3

Paste the label on same position.

SERVICE BULLETIN
TECHNICAL INSTRUCTIONS

1- Open the cover under driver.

SERVICE BULLETIN
2- Remove the label “LABEL, BRAKE PEDAL SWITCH (9050-634Y P/N)” from the cover.

SERVICE BULLETIN
3-

Label is self-adhesive. Paste new label on the same position.

SERVICE BULLETIN
NEW LABEL BRAKE PEDAL SWITCH

SERVICE BULLETIN
LABOUR RATE BREAKDOWN

Application

Duration (min)

Tool and vehicle preparation
Aplication of instructions
Last Control
Total

15
10
5
30

AFFECTED VEHICLE LIST
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

VIN
NLTAPLA51P1000280
NLTAPLA55P1000279
NLTAPLA53P1000278
NLTAPLA51P1000277
NLTAPLA5XP1000276
NLTAPLA58P1000275
NLTAPLA58N1000273
NLTAPLA56N1000272
NLTAPLA54N1000271
NLTAPLA52N1000270
NLTAPLA56N1000269
NLTAPLA54N1000268
NLTAPLA52N1000267
NLTAPLA50N1000266
NLTAPLA59N1000265
NLTAPLA57N1000264
NLTAPLA55N1000263
NLTAPLA53N1000262
NLTAPLA51N1000261
NLTAPLA5XN1000260
NLTAPLA53N1000259
NLTAPLA51N1000258
NLTAPLA5XN1000257
NLTAPLA58N1000256
NLTAPLA56N1000255
NLTAPLA54N1000254
NLTAPLA52N1000253
NLTAPLA50N1000252
NLTAPLA59N1000251
NLTAPLA57N1000250
NLTAPLA50N1000249
NLTAPLA50M1000248
NLTAPLA57N1000281

COUNTRY
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA

1

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
SaleBestseller No. 2
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
  • 【FOR END USER & DIYERS】 This error code reader AL319 is...
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


If the PDF is very large, it may not load in the preview below.

Download PDF [732.46 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: TS30-FM-2301

Replacement Service Bulletin Number:

MFR Communication Date: 2023-01-17

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: EQUIPMENT:OTHER:LABELS

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
THINKCAR Bidirectional Scan Tool, THINKSCAN 689BT All System Automotive Diagnostic Tool, Bi Directional OBD2 Scanner with ECU Coding, 34 Services, FCA Autoauth, CANFD and DoIP, Wireless Update
  • [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAMeBay logo and 64GB ROM, serving up to 5X faster than older MAX/MINIeBay logo/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool.
  • [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCAeBay logo AutoAuth(The 689BT only provides a login and purchase portal, and users are required to register for an FCAeBay logo account and pay a membership fee in order to perform the relevant automotive diagnostics)
  • [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
  • [Hot Advanced Features] 689BT bidirectional tool scanner for car newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
SaleBestseller No. 2
Thinkdiag OBD2 Scanner Bluetooth Full System Bidirectional Diagnostic Scan Tool OE Level Code Reader with ECU Function 15+ Reset Service FCA AutoAuth All Software 1 Year Update Fits for iOS & Android
  • 【15+ Advanced Reset & Calibration Functions】The Thinkdiag scanner provides 15+ professional maintenance functions, including:✔ Oil Reset | ✔ ABS Bleeding | ✔ Injector Coding | ✔ SAS Reset✔ TPMS Reset | ✔ BMS Reset | ✔ Transmission Adaptation | ✔ AFS Reset | ✔ Sunroof Calibration | ✔ Brake Reset | ✔ Suspension Relearn | ✔ Electronic Throttle Relearn | ✔ Seat Calibration | + More reset/relearn/calibrate/adaptive functions under automotive full systems diagnostic menu. Ideal professional OBDII scanner for mechanics and DIY enthusiasts, Thinkdiag delivers professional OE-level diagnostics with adaptive relearn capabilities for precise vehicle servicing.
  • 【Full-System Diagnostics OBD2 Scanner Bluetooth】 Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear DTCs, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It works with most car models after 1996, cover more than 120+ car brands. All car make and reset software come with 1 year update without any charge, much valuable and powerful than 1000 dollars level scanners in the market.
  • 【Potential Feature Activation】 Thinkdiag diagnose obd2 scanner Bluetooth allows you to match the replaced components with ECU, activate potential functions for BMWeBay logo, for GM, for Benz etc. Adjust some annoying features, adapt vehicle's settings to improve performance. No matter you are private owner or professional technician, Thinkdiag is a powerful and handy scanner in your repair tool list. Potential features are not suitable for every car models, please check with us before purchase. This superior function required newest Android OS device, it performs better on Android cell phone.
  • 【Bidirectional Test/Active Test】 Thinkdiag car code reader actuates solenoids and actuators for active testing, send commands to systems/components to test their real-time working status, without using manual vehicle controls which saves much diagnostic time and effort to identify malfunction causes. You can check windows, doors, mirrors, sunroof, fans, fuel pump and other parts working status by actuation test function, thinkdiag supports 10000+ active tests. When you process Automotive full system diagnostic, you can do active test on every supported module.
  • 【Intelligent Diagnostic Tool with Auto-VIN】Thinkdiag Bluetooth OBD2 scanner makes your smart phone device become a professional vehicle diagnostic tool, it compatible with Android and iOS system. Auto-VIN function supports the Thinkdiag identifies the most car models automatically, if autovin failed, you can choose car info manually. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined 4-in-1 Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
SaleBestseller No. 3
THINKCAR THINKSCAN 662 OBD2 Scanner,Car Diagnostic Tool with Bidirectional Active Test,Car Scanner Engine ABS SRS Transmission,Scanner for Car with 12 Reset,CAN FD & FCA SGW,Lifetime Free Update
  • 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
  • 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
  • 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
  • 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAMeBay logo + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
  • 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


This product presentation was made with AAWP plugin.

Share to...