Y NOMENCLATURE IDENTIFICATION ey
LiPPERT F
OF LABELS FOR SPRING AXLES FS
AXLES AND SUSPENSION
Anatomy of a Spring Axle Identification Label
G) CILiPPERT
—— 866 - 524 - 7821 www.lci1.com
= ltem# 000114573) Cust Part# Cust PO#
o==
o=—
— (8 =| LCI52-SBSA-86.5-68.5-NOSP-OS-L-65517-7225-30PT V000114392
=>
FS wait Tal pe
a= Serial: $007244765 nian
= Ill | I epee
(c) Capacity: 5200 Ibs] | MFG. Date: 07/16/21 fore chi = e
Tires, Rims, and Wheels: Shall comply with CMVTSS 109, and CMVSS; or CMVTSS 119 and CMVSS 1 (vd) [=] ae Ls o i
"Trailer running gear shall be equipped with tires having a static loaded radius that does not exceed by more than . ms
10% the stati loaded radus shown inthe te manufacturer's published data forthe actual te tested oo
CAN-D313-385 —- REC625-1 REC598 QR CODE FOR OEM USE ONLY
SLR as tested 13.25” AMP - 6.0 Axle Electrical Ratings: 12v Goshen, IN
This is the part number or Variant number used to order the
axle. Part numbers are traditionally considered to be standard
Part Number or i . A . “e
A . options without deviation from a set of metrics specific to
Variant Number 1 oe .
the axle's application, and Variant numbers are configured to
more custom applications.
Axle Description A code made up of several shorthand codes or "designations"
P that detail everything about the axle.
Calculated using the lowest rated component on the axle
assembly produced by Lippert. Axle capacity excludes tire and
Cc Axle Capacity wheel ratings. The vehicle manufacturer will determine final
GAWR (gross axle weight rating) and print that info on the VIN
label.
| _D | __DateofManufacture _| The date the axle was made in the factory.
RPO Number The production number for the run of axles to which this
particular axle belongs.
If axle is CSA/QAI certified, then a QAI logo will appear on the
F CSA/QAI Approved upper right corner of the label.
Rev: 12.28.2022 Page 1 CCD-0007341

Y NOMENCLATURE IDENTIFICATION ey
LiPPERT =
OF LABELS FOR SPRING AXLES FS
AXLES AND SUSPENSION
Purpose
This document outlines the nomenclature used to create spring axle descriptions that are applied to spring
axle identification labels.
Nomenclature
Model Options
NOTE: CURT models also available. CURT models are designated as CURTXXX in place of LCIXXX. In the
example axle tag and description, if it were a CURT model the model designation would be CURT52.
Model
Designation
Model Designation . .
4,000 - 4,400 Ibs 10” x 2.25” HD brake
LCI52 4,000 - 5,200 Ibs 12” x 2” brake
LCI60 6,000 tbs
LCI60MH 6,000 Ibs 12" x 2” brake
LCI7OMH
LCI70 7,000 Ibs 12” x 2” brake
LCI80H
8,000 Ibs 12.25" x 3.38” brake
LCl100 10,000 Ibs 12.25" x 3.38” brake
LCI100S 10,000 Ibs (short) 12.25” x 3.38" brake
LCcl120 12,000 Ibs 12.25" x 5.00” brake
Rev: 12.28.2022 Page 2 CCD-0007341

Y NOMENCLATURE IDENTIFICATION ey
LiPPERT F
OF LABELS FOR SPRING AXLES &
AXLES AND SUSPENSION
Spindle and Brake Options
Spindle and Brake
Designation
Spindle and Brake oe
Straight spindle, electric drum brake
SBSA Straight spindle, electric drum brake with self-adjust
SBSALL Straight spindle, electric drum brake with self-adjust, 33” lead wires
Straight spindle, idler hub, no brake
SINF Straight spindle, idler hub, no brake and no brake flange
SBWP Straight spindle, electric with park feature drum brake
ee Drop spindle, electric drum brake
DBSA Drop spindle, electric drum brake with self-adjust
DBSALL Drop spindle, electric drum brake with self-adjust, 33” lead wires
DBWP Drop spindle, electric with park feature drum brake
ee Drop spindle, idler hub, no brake
SHUS Straight spindle, hydraulic uni-servo drum brake
SHDS Straight spindle, hydraulic duo-servo drum brake
SHUSFB Straight spindle, hydraulic uni-servo free-backing drum brake
Straight spindle, air brake
DHUS Drop spindle, hydraulic uni-servo drum brake
DHDS Drop spindle, hydraulic duo-servo drum brake
DHUSFB Drop spindle, hydraulic uni-servo free-backing drum brake
Straight spindle with hydraulic disc brake
| pp Drop spindle with hydraulic disc brake
Hub Face Dimension, or Track Dimension
Hub Face
Information
The Hub face dimension is a customer specified value. It is the distance between the wheel mounting
surfaces of the hubs. This dimension is more commonly referred to as "hub face to hub face." Track
dimension is the distance from center of tire to center of tire on the mobile home unit's tires on the same
axle.
Rev: 12.28.2022 Page 3 CCD-0007341

Y NOMENCLATURE IDENTIFICATION 3
LiPPERT =
OF LABELS FOR SPRING AXLES 3
AXLES AND SUSPENSION
Spring Center Dimension
Spring Center
Dimension
Spring Center
Dimension or Code Description
Options
Customer specified dimension. Each dimension has a set value of
. . spring overhang limitations specified by Lippert Engineering. For more
XX-XX (Dimension) information on the parameters of these values, contact the Lippert Care
Center.
NOSS No spring seats welded
Tie Plate Designation
Tie Plate
Designation
Tie Plate Designation oe
SPIB Shock plate mounted for inboard shocks
SPOB Shock plate mounted for outboard shocks
NOSP No shock plate, regular tie plate is to be used
Fixed spring seats on both sides at a standard width (2.5” for 10K and 3”
FIXSS for 12K & 16K). Otherwise this designation will specify either 3FIXSS or
2.5FIXSS if not a standard width
For 10, 12 & 16K axles only. 1 fixed and 1 adjustable spring seat on the curb
ADJSS side
HUTSS For 12K & 16K axles only. 10K with 5” tube. Hutch spring seat welded
Rev: 12.28.2022 Page 4 CCD-0007341

ViiPPERT NOMENCLATURE IDENTIFICATION 3
7 Ct
’ OF LABELS FOR SPRING AXLES FS
AXLES AND SUSPENSION
Spring Mounting Designation
LCI52-SBSA-86.5-68.5-NOSP0S;-L-65517-7225-30PT VO000114392
Spring Mounting
Designation
Spring Mounting a.
Lubrication Designation
LCI52-SBSA~-86.5-68.5-NOSP-OS+L765517-7225-30PT V000114392
Lubrication
Designation
Lubrication Descripti
Designation Options escription
L Super-lube, grease zerk in end of spindle, dust cap with rubber plug.
Standard on LCI20-LCI80, and LCI80H axles.
Oil lubrication. This is an optional feature on LCI80 & LCI80H, but is
standard on 10-16K axles.
Rev: 12.28.2022 Page 5 CCD-0007341

Y NOMENCLATURE IDENTIFICATION 3
LiPPERT 7
OF LABELS FOR SPRING AXLES FS
AXLES AND SUSPENSION
Hub or Hub/Drum Designation
Hub/Drum
Designation
Hub/Drum
Designation Description Hub Options
Options
4 wheel bolts on a 4.00" circle with 1/2-20 stud.
545/5.5 5 wheel bolts ona 4.50 circle with 1/2-20 stud. 5.50" hub Idler
face diameter. For 10" and less wheels only.
545/6.5 5 wheel bolts ona 4.50 circle with 1/2-20 stud. 6.50" hub Idler
face diameter. For 12" and larger wheels only.
5 wheel bolts on a 4.50" circle with 1/2-20 stud. 7" X 1.25" brake
545 5 wheel bolts on a 4.50" circle with 1/2-20 stud. 10"X 2.25 brake, disc
brake, or idler
C545 5 wheel bolts on a 4.50" circle with 1/2-20 stud. Curt hub 10" X 2.25" brake
5 wheel bolts on a 4.75" circle with 1/2-20 stud. 10"x 2a take: or
5 wheel bolts on a 5.00" circle with 1/2-20 stud. 10"x arn or
5 wheel bolts on a 5.50" circle with 1/2-20 stud. 10"x 7 te or
655 6 wheel bolts on a 5.50" circle with 1/2-20 stud. 10"X 2.25 brake, disc
brake, or idler
6 wheel bolts on a 5.50" circle with 1/2-20 stud. Curt hub 10" X 2.25" brake
65517 6 wheel bolts on a 5.50" circle with 1/2-20 stud. 12"X2 brake, dise
brake, or idler
C65517 6 wheel bolts on a 5.50" circle with 1/2-20 stud. Curt hub 12" X 2" brake
| 660—#=é$éss| 6 wheel bolts on a 6.00" circle with 9/16-18 stud. AG hub
608B 8 wheel bolts on a 8.00" circle with 5/8-18 stud. AG hub
86517 8 wheel bolts on a 6.50" circle with 1/2-20 stud. 12"X2 brake, dise
brake, or idler
C86517 8 wheel bolts on a 6.50" circle with 1/2-20 stud. Curt hub
86537 8 wheel bolts on a 6.50" circle with 9/16-18 stud. 12°X 2" brake, disc
brake, or idler
8 wheel bolts on a 6.50" circle with 5/8-18 stud.
865H-9/16 8 wheel bolts on a 6.50" circle with 9/16-18 stud. 12°X 2" brake, dise
brake, or idler
Rev: 12.28.2022 Page 6 CCD-0007341

Y NOMENCLATURE IDENTIFICATION 3
LiPPERT 7
OF LABELS FOR SPRING AXLES FS
AXLES AND SUSPENSION
Hub or Hub/Drum Designation Table Continued
Hub/Drum
Designation Description Hub Options
Options
C865H-9/16 wheel bolts on a 6.50" circle with 9/16-18 stud. Curt 12"X 2" brake
865H-5/8 8 wheel bolts on a 6.50" circle with 5/8-18 stud. 12"X2 brake, disc
brake, or idler
C865H-5/8 8 wheel bolts on a 6.50" circle with 5/8-18 stud. Curt hub
86580-9/16 8 wheel bolts on a 6.50" circle with 9/16-18 stud. 12.25" X 3.38" brake,
disc brake, or idler
C86580-9/16 pwheel bolts on a 6.50" circle with 9/16-18 stud. Curt 12.25" X 3.38" brake
86580-5/8 8 wheel bolts on a 6.50" circle with 5/8-18 stud. 12.25" X 3.38" brake,
disc brake, or idler
8 wheel bolts on a 6.50" circle with 5/8-18 stud. Curt hub
12.25" X 3.38" brake
noe . (10K axle), 12.25" X 5"
865 8 wheel bolts on a 6.50" circle with 5/8-18 stud. brake (12K axle), or disc
brake
8/275 8 wheel bolts on a 275mm circle with M22-1.5 stud. 12.25 x 5" brake, or
disc brake
UTG 5 mount on 10.13" circle with 9/16 stud. Demountable 12" X 2" brake
for 14.5 rims
ABS Designation
NOTE: Example axle tag and description does not feature "ABS" designation.
If the axle description has ABS after the Hub or Hub/Drum designation value, then the axle will be equipped
with ABS sensor and tone ring.
Rev: 12.28.2022 Page 7 CCD-0007341

Ves NOMENCLATURE IDENTIFICATION S
HiPPERT OF LABELS FOR SPRING AXLES B
AXLES AND SUSPENSION
Leaf Spring Designation
LCI52-SBSA-86.5-68.5-NOSP-OS-L-65517 SOPT 000114392
Designation
Double Eye
Leaf Spring apace Free Number Eye to Eye Stack Leaf
Designation Length Length Width
Options Leaves
aswasi-Wa | 172-185
| Prev? | 3000tbs_ || arta 72-185 |
| raxr [3500165 | 488 | 6 | maria | 172-185
oom [Rig
axle
Rev: 12.28.2022 Page 8 CCD-0007341

Ves NOMENCLATURE IDENTIFICATION S
HiPPERT OF LABELS FOR SPRING AXLES B
AXLES AND SUSPENSION
Leaf Spring Designation Continued (Slipper Leaf Springs:
Slipper
Leaf Spring Cepperaiay Free Number Eye to Hook Stack Leaf
Designation Length Length Width
Options Leaves
|__Hwsi16 | 5001s | 265stip | 6 | 265 | 2
[sss | a0ooibs | 295ip [6 | 295 | 208/-03
| 724g | c000Ibs_ | 305Sip | 6 | 305 | 3.00
[sate | e2soibs | 325sip | 6 | 2s [as
| 7246 | 000ibs_ | 305stip_ | 6 | 305 | 3.00
11,200 Ibs 43.75 Slip 3 43.75 3.00
rome [were | ff
axle
NOTE: *354 Will be followed by the designation FRONT or BACK denoting the orientation requirement of
the spring.
Rev: 12.28.2022 Page 9 CCD-0007341

Ves NOMENCLATURE IDENTIFICATION 8
HiPPERT OF LABELS FOR SPRING AXLES B
AXLES AND SUSPENSION
Wire Leads and Connectors
LCI52-SBSA-86.5-68.5-NOSP-OS-L-65517-7225 (000414392
Connectors
Connector Options
available on 10-16K axles

Rev: 12.28.2022 Page 10 CCD-0007341

=: =Seer NOMENCLATURE IDENTIFICATION e
a 4
OF LABELS FOR SPRING AXLES FS
AXLES AND SUSPENSION
Additional Descriptors
NOTE: Additional descriptors are not featured in example axle tag or description.
Additional
Descriptors (If any)
eens Description
Descriptors PI
NO PWDR No powder coat option
NO CAMBER No camber put in tube (not recommended)
CAP - XXXXX Axle Capacity. (If not listed elsewhere on the axle identification tag.)
If the tube used in the axle is not standard, the part number for the tube will be added as an additional
descriptor. This is an optional tube designation for instances where overhang maximums are exceeded to
achieve desired axle capacity rating or if heavier tubing is desired.
Other Tube Options
177043 5.2K AXLE TUBE, 3.00” X .142” MIN WALL
122446 6K AXLE TUBE, 3.00” X .202” MIN WALL
122447 7K AXLE TUBE, 3.00” X .234” MIN WALL
132068 8K AXLE TUBE, 3.00” X .275” MIN WALL
Axle Beam Assembly Number/Variant Number
If axle has a variant number, there will be an additional variant number at the end of the description. This is
the Axle Beam Assembly Variant Number and is for internal use only
Axle Beam Assembly
Number or Variant Number
Asa supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are
our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at [email protected].
Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.
Rev: 12.28.2022 Page 11 CCD-0007341