NHTSA ID Number: 10228928
Manufacturer Communication Number: JLRTB02109NAS1
TSB/Document Date: 2023-01-06
Summary
Air Conditioning (A/C) Inoperative
04/01/2023, 12:48
TECHNICAL BULLETIN
JLRTB02109NAS1
TECHNICAL BULLETIN
01 SEP 2022
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a specific vehicle.
INFORMATION
SECTION:
412-01
SUBJECT/CONCERN:
Air Conditioning (A/C) Inoperative
AFFECTED VEHICLE RANGE:
MODEL:
MODEL YEAR:
VIN:
ASSEMBLY PLANT:
I-PACE (X590)
2019-2020
F60001-F90422
Graz (Austria)
I-PACE (X590)
2020-2023
600001-626745
Graz (Austria)
MARKETS:
NORTH AMERICA
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
1/9
04/01/2023, 12:48
TECHNICAL BULLETIN
CONDITION SUMMARY:
SITUATION:
The Air Conditioning (A/C) does not blow cold and is found to be inoperative. Further
investigation has found a leak on the A/C compressor inlet and/or outlet pipes. New level
service parts are available and even if only 1 pipe is found to be leaking, both pipes must
be renewed.
CAUSE:
Low weld quality.
ACTION:
Follow the instruction(s) below.
PARTS:
PART NUMBER
DESCRIPTION
QUANTITY
T4K19677
High Pressure (HP) pipe
1
T4K19719
Low Pressure (LP) pipe
1
T2H3162
Subframe to body bolts
2
J9C2719
Subframe to body bolts
4
XR857426
Steering column bolt
1
T2H5007
Front lower arm nut
4
T4K5106
Front lower arm bolt
2
T2H3774
Front lower arm bolt
2
T2H5057
Steering gear boot clips
2
T2H17786
Yolk to lower arm bolt
2
T4N8037
Tie-rod end nut
2
C2P7444
Stabilizer bar link nut
2
T4A12521
Halfshaft circlip
2
T4K2896
Front Electric Drive Unit (EDU) vibration damper
1
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
2/9
04/01/2023, 12:48
TECHNICAL BULLETIN
PART NUMBER
DESCRIPTION
QUANTITY
C2Z2224
Front EDU mounting nut
1
J9D1169
1
WARRANTY:
NOTE:
* When submitting your Warranty claim within the Warranty portal, use the
Condition Code list shown to select the Condition Code which best describes the
vehicle defect.
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL PART
JLRTB - A/C compressor pipe Pair - Renew
99.01.82
8.7
*
J9D1139/T4K1278
57.64.99
0.6
*
J9D1139/T4K1278
DESCRIPTION
NOTE:
Normal Warranty procedures apply.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
3/9
04/01/2023, 12:48
TECHNICAL BULLETIN
SERVICE INSTRUCTION:
NOTES:
Some components shown removed for clarity.
Some variation in the illustrations may occur, but the essential information is
always correct.
1.
Recover the A/C refrigerant (see TOPIx Workshop Manual section 412-00: Climate
Control System - General Information - General Procedures - Air Conditioning
System Recovery, Evacuation and Charging).
2.
Remove the front EDU for access only (see TOPIx Workshop Manual section 60101: Electric Drive Unit - Removal and Installation - Front Electric Drive Unit).
3.
Remove the cover.
Remove the 2 nuts.
Torque: 10 Nm
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
4/9
04/01/2023, 12:48
TECHNICAL BULLETIN
4.
Reposition the High Voltage (HV) harness away from the bracket.
Remove the 2 bolts.
Torque: 10 Nm
5.
NOTE:
A new O-ring must be installed during installation.
Disconnect the A/C pipe.
Remove the bolt.
Torque: 12 Nm
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
5/9
04/01/2023, 12:48
TECHNICAL BULLETIN
6.
Reposition the indirect condenser away from the bracket.
Remove the 2 nuts.
Torque: 10 Nm
Remove the bolt.
Torque: 12 Nm
7.
Disconnect the electrical connector from the A/C HP temperature sensor.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
6/9
04/01/2023, 12:48
TECHNICAL BULLETIN
8.
Disconnect the A/C pipe.
Remove the bolt.
Torque: 12 Nm
9.
Disconnect both A/C pipes from the A/C compressor.
Remove the 2 bolts.
Torque: 24 Nm
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
7/9
04/01/2023, 12:48
TECHNICAL BULLETIN
10.
Remove the A/C compressor HP pipe.
Remove the bolt.
Torque:8 Nm
11.
Disconnect the electrical connector from the A/C temperature and pressure
sensor.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
8/9
04/01/2023, 12:48
TECHNICAL BULLETIN
12.
Disconnect the A/C compressor LP inlet pipe from the accumulator and remove
the pipe.
Remove the bolt.
Torque: 10 Nm
13.
CAUTION:
Only the front wheel alignment may be affected by the repair procedure
outlined in this technical bulletin. If the rear wheel alignment is found to be
out of specification, this must be investigated and rectified separately, not
as part of this technical bulletin. If the rear wheel alignment is found to be
out of specification, the rear toe link locking nuts must be renewed
separately, not as part of this technical bulletin.
To install the new A/C pipes, reverse steps 1 to 12.
https://www.odyssey.jlrint.com/odyssey/HtmlFromUrlComposition.do
9/9
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: JLRTB02109NAS1
Replacement Service Bulletin Number:
MFR Communication Date: 2022-12-22
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.