TECHNICAL SERVICE BULLETIN
Illuminated ABS Warning Indicator With DTC C0030:07 Stored In The ABS
Module - Built On 04-Aug-2022 And Through 05-Aug-2022

22-2413
07 December
2022

Model:
Ford
2022 Bronco Sport

Built on 04-Aug-2022 and through 05-Aug-2022

Issue: Some 2022 Bronco Sport vehicles built on 04-Aug-2022 and through 05-Aug-2022 may exhibit an illuminated
anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) C0030:07 stored in the ABS
module. The vehicle may also exhibit a squeal noise from the left front wheel area. This may be due to a condition
where the wheel bearing and snap ring are not fully seated in the left wheel knuckle causing contact between the
front halfshaft and wheel knuckle. To correct this condition, follow the Service Procedure to diagnose and replace the
wheel knuckle, hub, bearing and front halfshaft.
Action: Follow the Service Procedure to correct the condition on vehicles that meet all the following criteria:
• 2022 Bronco Sport
• Built on 04-Aug-2022 and through 05-Aug-2022
• Illuminated ABS warning indicator with DTC C0030:07
Parts
Service Part
Number

Quantity Description

CCPZ-3B477G

1

LX6Z-1104-B

1

LX6Z-1215-A

Unit of
Issue

Piece
Quantity

1

1

Wheel Hub Assembly

1

1

1

Wheel Bearing

1

1

LX6Z-3K186-A

1

Left Wheel Knuckle

1

1

CV6Z-7059-A

1

Snap Ring

1

1

W520203S440

1

1

1

W719924S439

1

4

1

W520515S442

1

4

1

W719460S439

1

4

2

W520516S442

1

4

2

W715624S439

1

4

2

LX6Z-3B437-B

1

Left Front Drive Halfshaft (Part Time 4WD)

1

1

LX6Z-3B437-N

1

Left Front Drive Halfshaft (Full Time 4WD)

1

1

JM5Z-1S177A

1

1

1

PM-4-A

As
Needed

Retainer Nut

Left Tie Rod Bolt
Left Ball Joint Pinch Bolt
Left Ball Joint Pinch Nut
Strut To Wheel Knuckle Bolts
Strut To Wheel Knuckle Nuts
Brake Caliper Bolts

Left Halfshaft Seal
Motorcraft® Metal Brake Parts Cleaner (Compliant With Low
Volatile Organic Compound Requirements As Required In

Some USA States)
PM-4-B

As
Needed

Motorcraft® Metal Brake Parts Cleaner (Not Compliant With
Volatile Organic Compound Requirements)

XL-2

As
Needed

Motorcraft® High Temperature Nickel Anti-Seize Lubricant

Parts
Parts To Inspect And Replace Only If Necessary
Service Part Number Quantity Description
XT-12-QULV

If Needed Motorcraft® MERCON® ULV Automatic Transmission Fluid

Quantity refers to the amount of the service part number required to repair the vehicle.
Unit of Issue refers to the number of individual pieces included in a service part number package.
Piece Quantity refers to the total number of individual pieces required to repair the vehicle.
As Needed indicates the amount of the part may vary and/or is not a whole number. Parts can be billed out as nonwhole numbers, including less than 1.
If Needed indicates the part is not mandatory.
Warranty Status: Eligible under provisions of New Vehicle Limited Warranty (NVLW)/Service Part Warranty
(SPW)/Special Service Part (SSP)/Extended Service Plan (ESP) coverage. Limits/policies/prior approvals are not
altered by a TSB. NVLW/SPW/SSP/ESP coverage limits are determined by the identified causal part and verified
using the OASIS part coverage tool.
Labor Times
Operation
No.

Description
2022 Bronco Sport: Remove The Left Front Wheel Hub Assembly Inspect (Fail) Replace The
Wheel Knuckle, Wheel Bearing And Halfshaft Following The Service Procedure (Can Be
Claimed With Operation B)
Additional Time To Check And Correct Front Toe (Can Be Claimed With Operation A)

Time

222413A

2.4
Hrs.

222413B

0.6
Hrs.

Repair/Claim Coding
Causal Part:

1215

Condition Code: 17

Service Procedure
1. Remove the left front wheel hub assembly. Refer to the Workshop Manual (WSM), Section 204-01 Front Wheel
Bearing and Wheel Hub > Removal and Installation.
2. Inspect if the wheel bearing and snap ring are fully seated with metallic particles in the bearing surface. Does the
vehicle exhibit a wheel bearing snap ring and/or wheel bearing not fully seated in the left front wheel knuckle with
metallic particles in the bearing surface?
(1). Yes - proceed to Step 3.
(2). No - reinstall the left front wheel knuckle assembly with a new wheel bearing and snap ring. Road test at a
speed greater than 12 mph (20 km/h) to clear DTC C0030:07. Repair is complete.
3. Replace the left front wheel knuckle, left front wheel hub and wheel bearing, and left front halfshaft.
(1). For left front wheel knuckle, refer to the WSM, Section 204-01 Front Suspension > Removal and Installation.
(2). For left front wheel hub and wheel bearing, refer to the WSM, Section 204-01 Front Wheel Bearing and Wheel
Hub > Removal and Installation.
(3). For left front halfshaft, refer to the WSM, Section 205-04 Front Drive Halfshafts > Removal and Installation.
4. Road test at a speed greater than 12 mph (20 km/h) to clear DTC C0030:07.

© 2022 Ford Motor Company
All rights reserved.
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and
equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information
that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do not assume that a condition
described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy
and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article.
The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supersede
this information with updates. The most recent information is available through Ford Motor Company's on-line technical resources.