NHTSA ID Number: 10228693
Manufacturer Communication Number: Circular 23EM
TSB/Document Date: 2023-01-06
Summary
SERV_ACT - Engine Control Module (ECM) Software
Emissions Recall
Code: 23EM
Subject
Release Date
Engine Control Module (ECM) Software
December 20, 2022
Country
Beginning
Model
Year
Ending
Model
Year
Vehicle
USA
CAN
2009
2009
2012
2012
TOUAREG
TOUAREG
Affected Vehicles
Vehicle
Count
305
69
Check Campaigns/Actions screen in ELSA on the day of repair to verify that a VIN qualifies for repair under this
action. ELSA is the only valid campaign inquiry & verification source.
Problem Description
Corrective Action
Code Visibility
Campaign status must show “open.”
If ELSA shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Volkswagen
has determined, based on service records, that the software version of the engine
control module (ECM) requires an update to validate and, if necessary, reapply the ECM
software that was installed on these vehicles at the time that they received the Approved
Emissions Modification (USA) / Emissions Modification (Canada). This issue could have an
impact on vehicle tailpipe emissions.
Update the ECM software.
On or about December 20, 2022, the campaign code will be applied to affected vehicles.
Owner Notification
Owner notification will take place in December 2022. Owner letter examples are included in this
bulletin for your reference.
Emissions Campaigns
Requirements
(CALIFORNIA ONLY)
The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.vwhub.com.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2022 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
December 2022
23EM Page 1 of 11
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the ELSA screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option.
Canada dealers: Upload the repair order [signed by customer] to Volkswagen
WIN/Operations/Campaign
Closure.
Service Number
Damage Code
Parts Vendor Code
Claim Type
23EM
0099
WWO
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Mark labor as causal
Do not claim wash/loaner under this action
U.S.A.: Loaner/rental coverage cannot be claimed under this action. However,
loaner/rental may be covered under the Alternate Transportation Program. Please refer
to the Volkswagen
Warranty Policy and Procedures Manual for loaner claims
information and reimbursement details.
Canada: Loaner/rental coverage cannot be claimed under this action. Please refer to t
Volkswagen
Service Loaner Program to determine loaner eligibility.
Criteria I.D.
01
LABOR
Labor Op
Time Units
Description
2706 89 50
10
Connect battery charger
2470 25 99
Time stated on
diagnostic protocol
(up to 50 TU)
Update engine control module software
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Volkswagen
dealer. 2022 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
December 2022
23EM Page 2 of 11
Customer Letter Example (USA)
This notice applies to your vehicle: ,
Subject: Emissions Recall 23EM – Engine Control Module (ECM) Software
Dear Volkswagen
Owner,
In cooperation with the United States Environmental Protection Agency and the California Air Resources Board, we are
informing you of our decision to conduct an emissions recall on certain 2009-2012 model year Volkswagen
vehicles.
Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
Volkswagen
has determined, based on service records, that the software version of the
engine control module (ECM) requires an update to validate and, if necessary, reapply the
ECM software that was installed on these vehicles at the time that they received the
Approved Emissions Modification. This issue could have an impact on vehicle tailpipe
emissions.
What will we do?
Your authorized Volkswagen
dealer will update the ECM software in your vehicle. This work
will take about an hour to complete and will be performed for you free of charge. Please
keep in mind that your dealer may need additional time for the preparation of the repair, as
well as to accommodate their daily workshop schedule.
IMPORTANT! Please note that if the ECM in your vehicle has been “chipped,”
“tuned,” or otherwise modified from factory specifications with aftermarket
components and/or software, work needed to repair, replace, or return the ECM to
factory specifications is NOT covered under this action.
What should you do?
Please contact your authorized Volkswagen
dealer as soon as possible to schedule this
service. To set up an appointment online, please visit www.vw.com/find-a-dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt.
If you have changed your address or sold the vehicle, please fill out the enclosed prepaid
Owner Reply card and mail it to us so we can update our records.
Important information for
California Vehicle
Owners – California
Regulations
California regulations require that this campaign be completed prior to the time you renew
your vehicle registration. Therefore, please make sure that this campaign is completed
prior to the renewal of your vehicle registration, and that you furnish proof of completion
to the Department of Motor Vehicles (DMV) in the form of a copy of the dealer’s repair order,
including a signed “Proof of Correction” certificate. You obtain this from your dealer after the
campaign has been completed. Please retain the signed “Proof of Correction Certificate”
with your vehicle records. DO NOT MAIL THIS FORM to the DMV, unless requested.
Can we assist you
further?
If your authorized Volkswagen
dealer fails or is unable to complete this work free of charge
within a reasonable time, or if you should have any questions about this communication,
please reach out to us using your preferred method of communication at
www.vw.com/contact or by calling us at 800-893-5298.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Volkswagen
Customer Protection
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described.
To determine whether this information applies, contact an authorized Volkswagen
dealer. 2022 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
December 2022
23EM Page 3 of 11
Customer Letter Example (CANADA)
This notice applies to your vehicle: ,
Subject: Emissions Recall 23EM – Engine Control Module (ECM) Software
Dear Volkswagen
Owner,
This notice is sent to you in accordance with the requirements of the Canadian Environmental Protection Act, 1999.
Volkswagen
has determined that a defect, which relates to a prescribed emission standard, exists in certain 2009-2012
model year Volkswagen
vehicles. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
Volkswagen
has determined, based on service records, that the software version of the
engine control module (ECM) requires an update to validate and, if necessary, reapply the
ECM software that was installed on these vehicles at the time that they received the
Emissions Modification. This issue could have an impact on vehicle tailpipe emissions.
What will we do?
Your authorized Volkswagen
dealer will update the ECM software in your vehicle. This work
will take about an hour to complete and will be performed for you free of charge. Please
keep in mind that your dealer may need additional time for the preparation of the repair, as
well as to accommodate their daily workshop schedule.
IMPORTANT! Please note that if the ECM in your vehicle has been “chipped,”
“tuned,” or otherwise modified from factory specifications with aftermarket
components and/or software, work needed to repair, replace, or return the ECM to
factory specifications is NOT covered under this action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Volkswagen![]()
dealer as soon as possible to schedule this service. On or about December 20, 2022 the
necessary repair instructions and parts will be available to your authorized Volkswagen![]()
dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt.
If you have changed your address or sold the vehicle, please fill out the enclosed prepaid
Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Volkswagen
dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Customer Relations, Monday through Friday from
8AM to 8PM EST by phone at 1-800-822-8987 or via our “Contact Us” page at www.vw.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Volkswagen
Customer Protection
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described.
To determine whether this information applies, contact an authorized Volkswagen
dealer. 2022 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
December 2022
23EM Page 4 of 11
Required Tools
Diagnostic Tester
Battery Tester/Charger
capable of minimum 70
Amp continuous supply
-VAS6150X/VAS6160X(or equivalent)
Repair Instruction
Section A - Check for Previous Repair
TIP
If Campaign Completion label is present, no further work is required.
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a
copy with the repair order.
Confirm the Campaign/Action is open . If the status is closed, no further work is
required.
Note the Applicable Criteria ID for
use in determining the correct work to be done
and corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are
open, they must be performed in order of the Start
date . The oldest should be performed
first.
All Safety Recalls must be completed prior
to completing this campaign.
Proceed to Section B.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular 23EM
Replacement Service Bulletin Number:
MFR Communication Date: 2022-12-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW
, for Audi
, for GM, for Ford
and more. Note:D200 does‘t provide any OE software. - 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW
, for Audi
, for BMW
, for Benz, for Mitsubishi
and more. PMI function for Ford
/for Lincoln
/for Mazda
, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market. - 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA
Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars. - 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




