NHTSA ID Number: 10228690
Manufacturer Communication Number: Checklist 97FYV2
TSB/Document Date: 2023-01-06
Summary
SERV_ACT - Volkswagen
ID.4 Update Package - Updated
97FY REPAIR CHECKLIST
NOTE
This checklist is not intended to replace the 97FY work instructions. It is meant to help guide the technician through the
repair and ensure that no steps are missed. Refer to the 97FY work instructions for specific repair steps.
This document should be printed, filled out and attached to the work order.
Vehicle VIN:________________________________Technician Name______________________Repair Date:_________
Prerequisite Steps
USB Drive created
ODIS Service version at V10.0.0 – Diagnostic Content 2.46.5 or higher
One key available and key battery is OK
Second key more than 20 meters from the vehicle
New 12V battery properly charged
VAS5908 Battery charger attached
Front door windows both rolled down
No pre-existing “No Communication” or “Faulty Control Module” faults stored for modules that
require updating
Service interval adaptation channel $0541 read out and recorded:
Distance driven since the last inspection = ____________________
Time since the last inspection = _____________________________
Step 1 – USB Flash of ICAS3
Pre-flash:
Nothing connected to vehicle’s OBD diagnostic connection
Hazards on
Driver door open (must remain open for entirety of ALL flashes)
Seat belt buckled into driver’s seat buckle
Key placed over reader coil in center cupholder
Post-flash:
Radio System Information displays: Device part number - 10A035842J, Software - 0561
Seat belt unbuckled from driver seat buckle
Ignition turned off
USB drive removed
Step 2 – Replacing 12V Battery
Before replacing 12V battery:
Serial number from NEW battery recorded__________________________________________
Ignition turned off
Brake pedal was briefly pressed and 2 minutes has elapsed
Zero voltage measured on 12V battery cables after removing negative terminal
After replacing 12V battery:
All power cables installed on fuse panel A
All connections properly torqued
Battery cable cover installed prior to tightening negative terminal
Battery monitoring control module -J367- plugged back in
Step 3 – Perform Software Update SVM
Pre-flash:
VAS5908 Charger turned OFF and back ON to reset default charging time
VAS5908 Charger connected to 12V battery
Seat belt unbuckled from driver seat buckle
USB drive removed
Hazards on
Driver door open (must remain open for entirety of ALL flashes)
Scan tool is communicating with the diagnostic head by USB
ODIS shows address 005F software = 0561
ODIS shows address 8125 software = 0561
Ignition cycled OFF, then back ON before starting the SVM
Post-flash:
ALL control modules reporting OK
Step 4 – Perform Bus Sleep Procedure
All keys at least 20 meters from vehicle
Nothing connected to vehicle’s OBD diagnostic connection
Hazards off
Battery charger removed from 12V battery
All doors, hood are rear lid closed
Vehicle locked
15 minutes elapsed before turning ignition back on
Step 5 – Perform Software Configuration via SVM
Pre-flash:
VAS5908 Charger turned OFF and back ON to reset default charging time
VAS5908 Charger connected to 12V battery
Hazards on
Driver door open (must remain open for entirety of ALL flashes)
Scan tool is communicating with the diagnostic head by USB
Ignition cycled OFF, then back ON before starting the SVM
Post-flash:
ALL control modules reporting OK
Step 6 – Perform Replace 12V Battery Test Plan
Test plan completed
Step 7 – Perform Bus Sleep Procedure
All keys at least 20 meters from vehicle
Nothing connected to vehicle’s OBD diagnostic connection
Hazards off
Battery charger removed from 12V battery
All doors, hood are rear lid closed
Vehicle locked
15 minutes elapsed before turning ignition back on
Step 8 – Perform VKMS Adaptation Test Plan
Test plan completed
Step 9 – Perform Manual Basic Settings
G85 manual basic settings completed and warning light in cluster has gone out
Front and rear window end steps set
Temperature unit setting confirmed based on customer preference in infotainment display
Step 10 – Adjusting Service Interval
005F adaptation channel $0548 – “distance driven since the last inspection” checked and adjusted
005F adaptation channel $0549 – “time since the last inspection” checked and adjusted
Step 11 – Perform GFF Test Plans For All Faults Created by the Flash Process
All test plans for repair related faults completed
Verify ID Light operation after road test
Step 12 – Replacing Owner’s Manual
First page of original owner’s manual removed and placed with new owner’s manual
New owner’s manual AND tow hook supplement placed in glove compartment and original owner’s
manual discarded
Final Steps
Campaign completion label applied next to vehicle emission control information label
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
- [All-in-One OEM Reprogramming and Diagnostics] - When...
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
- [One-Click Installation, Continuous Updates] - The exclusive...
- [Works with Windows Compatibility and OEM Software...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Checklist 97FYV2
Replacement Service Bulletin Number:
MFR Communication Date: 2022-12-17
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- AI-Assisted Wireless Car Diagnostic Scanner Puts $2,000 Scan Tools to Rest: Upgrade Ver. of D8BT/D7W, wireless ver. of D8S, XTOOL D8W obd2 scanner diagnostic tool targeted for professional US mechanics/workshops/family garage, with 64 GB high-end hardware, 20X faster Built-in WIFI connection, More Stable than BT, packs high-level comprehensive, easy to use AI Assistance features: Topology Mapping, ECU C0ding, PMI Function, 4K+ Active Tests, All System Diagnosis, 42+ Maintenance and more, FCA/CAN FD/DoIP, Pre/Post Scan, Diagnostic Report V2.0, etc. offers the “dealership” diagnosis, isn’t it a Top Pick Scan Tool in this budget
- Super Powerful WI-FI Communication, Extraordinary Built-in Wireless Connectivity: The WI-FI connection, the advanced version of BT, enables the D8W car scanner diagnostic tool to connect directly to vehicles more quickly, easily by simply plugging in the VCI, with the built-in Wi-Fi inside. No additional WiFi signal is required. Its Max high-speed 64 Mbps transmission speed, 33 ft-66 ft or further diagnostic distance, and stable connectivity, makes this obd 2 scanner the winner surpasses traditional BT scanners, more stable, faster, supports longer distance, convenient, and easy to plug and play
- Topology Mapping/AI-Assisted OE-Level Full Systems Diagnostics/Bi Directional Scan Tool/4000+ Active Test: D8W topology scan tool can scan, display all modules with a color topology structure, and view faults at a glance, comparable to other $1,200 to $2,000 obd scanners in the market. Its AI-powered system instantly analyzes fault codes and diagnostic reports for faster and precise repair solution. It also features full-featured bidirectional ability such as Compression Test, Mirror/Sunroof Test, and more active tests, save costs from "dearlership", covers more vehicles for Chrysler 2018+. Please check compatibility with XTOOL before purchase, AI is just for reference
- Advance ECU Configuration/PMI: XTOOL D8W advanced automotive scanner diagnostic tool has the abilities for BENZ/for BMW/for Mitsubishi are designed to unleash the hidden function like turn off the seat belt buzzer and improve car performance. New launched PMI function provided by XTOOL D8W car code scanner for Ford, for Lincoln, for Mazda supports restore full ECU operation into new modules to finish replacement. Note: Please check compatibility with VIN, and Modules
- 42+ Services/Calibration/Initialization/Matching/Relearn Functions: D8W wireless bidirectional obd2 scanner performs more than 42 comprehensive service functions for 10,000+ vehicles including Oil reset, EPB, SAS, Throttle, BMS reset, ABS Bleed, injector c0ding, Fuel Trim Reset, Cylinder Power Balance, Cam Crank Sensors Relearn, VIN Writing, Fuel Injector Balance, Language Change, Auto Stop/Start Reset, A/F Reset, PMI function, etc. Note: Special Functions do NOT work on all cars
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.