NHTSA ID Number: 10227919
Manufacturer Communication Number: Z2G_Dealer_Lette
TSB/Document Date: 2022-12-19
Summary
DL: Toyota
has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
Scion iQ
Scion xB
Sequoia
Highlander/
Highlander HV
Prius
Prius C
Prius PHV
Prius V
Op Code
Description
Flat Rate Hours
Repaint the affected
panel(s)
1.0 hr / vehicle*
ZKG001
Z2G001
(Submit under campaign Z2G)
Z3G001
A “warranty pre-approval code” must be issued by the website prior to authorizing any repairs. Include the
code in the CCR of the claim. This warranty pre-approval code is not a guarantee for payment of the claim. All
ZKG claims are subject to warranty department review for proper claim submission and compliance with
Toyota Warranty Policy and Procedures including Policies 8.22 and 4.12.
*On October 29, 2021, Toyota increased the flat rate time of Op Code ZKG001 to 1.0 hr / vehicle.
The flat rate time includes 1.0 hour for administrative cost per unit for the dealership which includes the
administrative time to upload photos and body shop preliminary estimate details to the website, and
coordinate the repair with a body shop.
•
Sublets:
• The total cost of the final invoice from the body shop should be included in the sublet section as
sublet type “PT”. A copy of the invoice is required to be attached.
• DO NOT include the actual cost of parts in the sublet section. The actual cost of parts should be
subtracted from the sublet bill if they are included in the body shop’s final invoice. Parts should
ONLY be claimed in the parts section of the warranty claim.
• In the very rare case that your dealership was required to use the damp cloth confirmation
procedure described in T-SB-0162-19 (Toyota) or S-SB-0004-19 (Scion), claim the cost under sublet
type “ZZ” using the following formula: 0.3 hours x Dealer Hourly Warranty Labor Rate x the number
of panels where the condition was confirmed using the damp cloth confirmation procedure. Photos
must be attached to the claim showing that the condition exists after the damp cloth confirmation.
© 2022 Toyota Motor Sales, USA
C u s t o m e r S u p p o r t P r o g r a m Z K G - D - P a g e | 12
Labor Rate for Body and Paint Work:
As provided in Policy 8.22, a dealership’s service department mechanical rate may not be used for the body
and paint work performed under ZKG. If the work is performed by the dealership’s own body shop, the labor
rate used for calculation of labor charges must be the posted body shop labor rate, not the service
department’s mechanical rate. If the work is performed as a sublet by an independent body shop, as provided
in Policy 4.12, the sublet repair shop’s invoice must include the reasonable and customary repair shop rate,
not the dealership’s service department rate.
Important Note: As provided in Policy 5.3, pre-authorization is required to submit a claim for paint repairs
exceeding $1,000, or as required in any Policy or Procedure. For ZKG work, this pre-authorization is obtained
at the ZKG website (“warranty pre-approval code”) by a dealer submitting a preliminary estimate and photos.
As provided in Policy 5.3, this authorization to submit a claim is not a guarantee for payment of the claim,
which is subject to Toyota’s review, including proper claim submission and compliance with Toyota Warranty
Policy and Procedures. In addition, a dealer claim for the work must follow the labor rate policies described
in this Dealer Letter and Toyota Warranty Policy and Procedures.
Claim Filing Accuracy and Correction Requests
It is the dealer’s responsibility to file claims correctly for this Customer Support Program. This claim filing
information is used by Toyota for various government reporting activities; therefore, claim filing accuracy is
crucial. If it has been identified that a claim has been filed using an incorrect Op Code or a claim has been
filed for an incorrect VIN, refer to Warranty Procedure Bulletin PRO17-03 to correct the claim.
C u s t o m e r S u p p o r t P r o g r a m Z K G - D - P a g e | 13
Post Campaign Expiration Warranty Procedures
Toyota will process claims submitted for vehicles where the condition covered by this Customer Support
Program was confirmed at the dealership prior to the expiration of the vehicle’s Customer Support Program
coverage.
Toyota requires your dealer to document the peeling diagnosis by uploading the required photos of the
peeling panels to the website prior to the expiration of the vehicle’s coverage. Photos for panels uploaded
after the expiration date will be considered ineligible for claim payment. Furthermore, all previously
diagnosed VINs prior to expiration must have repairs completed and claims submitted prior to 12 months from
the vehicle’s expiration date.
Note that once a photo is uploaded to the website for a panel, and has been accepted, the panel will show a
green check mark as shown in the screen shot below. At this point, the photo for that panel is saved
permanently in Toyota’s records with a date stamp unless you return to the website and delete the photo later.
You don’t have to “close” the web submission to save the photo(s). Also, note that the photo retention
functionality in the website does not provide exemption from warranty policy 8.1 and 8.2.
Green check means photos
Photos are “saved” unless you
are “saved” unless you
chose to delete them later
choose to delete them later
© 2022 Toyota Motor Sales, USA
C u s t o m e r S u p p o r t P r o g r a m Z K G - D - P a g e | 14
Loaner Vehicle Reimbursement Procedure
The cost of providing a loaner vehicle for the period that the vehicle is undergoing repairs though Toyota
Rent-A-Car (TRAC) may be claimed at a maximum rate of $42.00 per day as sublet type “RT”. The maximum
allowable claimable days should follow the table below.
Total “Body” + “Paint” Labor Hours from
Body Shop Invoice
0-3
4-8
9-16
17-24
25-32
33-40
41-48
49-56
57-64
65-72
73-80
81-88
89-96
97-104
105-112
113-120
•
•
Maximum Claimable Loaner Vehicle Days
0
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
For rentals that exceed the maximum number of allowable days and/or dollars per day, refer to the Toyota
Transportation Assistance Policy (TTAP) for DSPM authorization requirements.
Rental invoice MUST be attached to all rental claims. These claims may be subject to debit if rental invoice
is not attached.
Customer Reimbursement
Reimbursement consideration instructions will be included in the owner letter.
Thank you for your cooperation.
TOYOTA MOTOR SALES, U.S.A., INC.
CUSTOMER SUPPORT PROGRAM ZKG
Multiple Models and Model Years
Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color
Coverage for Peeling of Factory-Applied Paint
Frequently Asked Questions
Original Publication Date: December 4, 2019
◄ IMPORTANT UPDATE ►
DATE
November 17, 2022
April 28, 2022
October 27, 2020
May 15, 2020
December 12, 2019
TOPIC
• Toyota has added approximately 275,590 Prius series vehicles covered by this
Customer Support Program.
• Toyota has added approximately 430,700 2008 – 2018 model year Highlander
and Highlander Hybrid vehicles to this Customer Support Program
• Toyota has added approximately 35,200 certain 2010 – 2018 model year
Sequoia vehicles to this Customer Support Program
• Toyota has added approximately 31,500 vehicles to the covered vehicles
population.
• Q/A #11 has been updated regarding vehicles that have been added to this
Customer Support Program
This document has been updated to clarify that only authorized Toyota dealerships
are authorized to confirm if the paint peeling condition is covered by this program.
However, after confirming that the paint peeling condition is covered by this
program, the authorized Toyota dealership may choose to coordinate to have the
repainting repair performed by a non-Toyota repair facility (e.g. third-party
collision repair facility, body shop, etc).
Note that as of May 15, 2020, Toyota Certified Collision Centers are now permitted
to confirm if the paint peeling condition is covered by this program. Review the
Dealer Letter for detailed information, polices, and training requirements.
The most recent update will be highlighted with a red box.
FAQ Page 1 of 8
© 2022 Toyota Motor Sales, USA
Q1:
A1:
Q2:
A2:
Q3:
A3:
What is the condition?
Toyota has received reports of paint peeling on certain vehicles with the original factory-applied
Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint
colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior
metal body panels.
Q1a:
What specific paint colors are affected by this condition?
A1a:
The vehicles involved in this program were factory-painted with Blizzard Pearl (Toyota paint
code 070) or Super White (Toyota paint code 040) paint color.
What is Toyota going to do?
In early August 2019, Toyota announced the “Customer Notification Phase” of this program. Toyota is
now launching the repair portion of this program
How will owners be notified that the repair is available for their vehicle?
Toyota is administering this program in multiple phases.
Phase 1 – Customer Notification
In the interest of customer satisfaction, Toyota first notified owners via first class mail between late
August 2019 and mid-September 2019 about this program, provided a process for reimbursing out of
pocket expenses associated with this condition incurred prior to September 26, 2019, informed owners
that Toyota is working on the repair for their vehicle, and that they will be re-notified when the repair
becomes available. Refer to the table below for a summary of these vehicles.
Model / Years
2008 – 2015 4Runner
2008 – 2017 Avalon
2013 – 2017 Avalon Hybrid
2008 – 2017 Camry
2008 – 2017 Camry Hybrid
2008 – 2019 Corolla
2011 – 2015 Scion iQ
2008 – 2017 RAV 4
2012 – 2014 RAV 4 EV
2008 – 2015 Scion xB
Production Period
Late December 2007 – Late May 2015
Early January 2008 – Late May 2017
Late May 2012 – Late May 2017
Early January 2008 – Late February 2017
Early January 2008 – Late February 2017
Late November 2007 – Late September 2018
Late September 2010 – Late September 2014
Early January 2008 – Early September 2017
Late July 2012 – Late August 2014
Mid January 2007 – Late December 2015
Approximate Total
Vehicles
73,900
86,600
13,800
555,700
47,400
580,700
3,200
332,400
1,100
44,200
Phase 2 – Repair Available and Customer Re-notification
In early December 2019 Toyota launched the repair portion of this program. Toyota started re-notifying
owners involved in phase 1 regarding the availability of the repair in late December 2019.
FAQ Page 2 of 8
© 2022 Toyota Motor Sales, USA
Phase 3 – Approximately 31,500 vehicles added to this Customer Support Program
In mid-May 2020, Toyota added approximately 31,500 vehicles to this Customer Support Program and
the repair is available for these vehicles. Refer to the table below for a summary of the added vehicles.
Model / Years
2008 Avalon
2008 - 2009 Camry
2008 Camry Hybrid
2008 Corolla
Production Period
Late February 2007 – Late December 2007
Early August 2007 – Late December 2007
Early August 2007 – Late December 2007
Early June 2007 – mid-December 2007
Approximate Total Vehicles
5,000
18,600
2,800
5,100
Phase 4 – Approximately 35,200 model year 2010 – 2018 Sequoia vehicles added to this Customer
Support Program
In late October 2020, Toyota added approximately 35,200 model year 2010 – 2018 Sequoia vehicles to
this Customer Support Program and the repair is available for these vehicles. Refer to the table below
for a summary of the added vehicles.
Model / Years
2010 – 2018 Sequoia
Production Period
Early May 2009 – Late August 2018
Approximate Total Vehicles
35,200
Phase 5 – Approximately 430,700 2008 – 2018 model year Highlander and Highlander Hybrid vehicles
added to this Customer Support Program
In late April 2022, Toyota added approximately 430,700 2008 – 2018 model year Highlander and
Highlander Hybrid vehicles to this Customer Support Program and the repair is available for these
vehicles. Refer to the table below for a summary of the added vehicles.
Model / Years
2010 – 2018 Highlander
2008 – 2018 Highlander
Hybrid
Production Period
Late May 2007 – Late August 2018
Approximate Total Vehicles
401,600
Late August 2007 – Late August 2018
29,100
Phase 6 – Approximately 276,590 model year 2007 – 2015 Prius, Prius C, Prius PHV, and Prius V vehicles
added to this Customer Support Program
In mid-November 2022, Toyota added approximately 276,590 model year 2007 – 2015 Prius, Prius C,
Prius PHV, and Prius V vehicles added to this Customer Support Program and the repair is available for
these vehicles. Refer to the table below for a summary of the added vehicles.
Model / Years
2007 – 2015 Prius
2012 – 2015 Prius C
2012 – 2015 Prius PHV
2012 – 2014 Prius V
Production Period
Early July 2007 – Early November 2015
Mid-December 2011 – Late April 2015
Late July 2011 – Late February 2015
Late September 2010 – Early November 2014
Approximate Total
Vehicles
22,9610
9,640
11,180
26,160
FAQ Page 3 of 8
© 2022 Toyota Motor Sales, USA
Q4:
A4:
Which and how many vehicles are covered by this Customer Support Program?
There are now approximately 2,512,930 vehicles covered by this Customer Support Program.
Model Name
Model Year
Production Period
4Runner
Avalon
Avalon Hybrid
Camry
Camry Hybrid
Corolla
RAV 4
RAV 4 EV
Scion iQ
Scion xB
Sequoia
Highlander
Highlander Hybrid
Prius
Prius C
Prius PHV
Prius V
2008 – 2015
2008 – 2017
2013 – 2017
2008 – 2017
2008 – 2017
2009 – 2019
2008 – 2017
2012 - 2014
2011 – 2015
2008 – 2015
2010 – 2018
2008 – 2018
2008 – 2018
2007 – 2015
2012 – 2015
2012 – 2015
2012 – 2014
Late December 2007 – Late May 2015
Late February 2007 – Late May 2017
Late May 2012 – Late May 2017
Early August 2007 – Late February 2017
Early August 2007 – Late February 2017
Early June 2007 – Late September 2018
Early January 2008 – Early September 2017
Late July 2012 – Late August 2014
Late September 2010 – Late September 2014
Mid-January 2007 – Late December 2015
Early May 2009 – Late August 2018
Late May 2007 – Late August 2018
Late August 2007 – Late August 2018
Early July 2007 – Early November 2015
Mid-December 2011 – Late April 2015
Late July 2011 – Late February 2015
Late September 2010 – Early November 2014
Q4a:
Are there any other vehicles covered by this Customer Support Program in the U.S.?
A4a:
Yes, there are approximately 5,780 2008 – 2009 model year Lexus GX 470 vehicles covered by
this Customer Support Program.
FAQ Page 4 of 8
© 2022 Toyota Motor Sales, USA
Q5:
A5:
What are the coverage details of this program?
This Customer Support Program provides coverage for involved vehicles with the original factory
Blizzard Pearl or Super White paint. The covered condition may occur when sunlight over time
degrades the adhesion between the factory-applied paint primer coat layer and the base metal
electrodeposition layer causing the paint to peel from the metal body panel. If the condition is verified,
the specific panel affected will be repainted.
•
Phase 1 – 4
vehicles
•
•
Phase 5
vehicles
Phase 6
vehicles
•
•
•
Duration of Coverage
The Primary Coverage will be offered until December 11, 2022, regardless of
mileage.
After the Primary Coverage, the Secondary Coverage is applicable for 10 years
from the date of first use, regardless of mileage.
The Primary Coverage will be offered until November 4, 2024, regardless of
mileage.
After the Primary Coverage, the Secondary Coverage is applicable for 10 years
from the date of first use, regardless of mileage.
The Primary Coverage will be offered until June 13, 2025, regardless of mileage.
After the Primary Coverage, the Secondary Coverage is applicable for 10 years
from the date of first use, regardless of mileage.
Note:
Damage to the vehicle exterior (such as collision damage, deep scratches, dents, etc.) may prevent a
repair facility from performing the paint repair covered by this Customer Support Program.
This Customer Support Program does not cover repair of such damage.
If any damage must be repaired prior to performing the paint repair covered by this Customer Support
Program, the dealer may offer to repair the damage at the customer’s expense.
Examples of damage that might prevent paint repair are:
• Collision damage
• Dents
• Deep scratches
• Deep rock chips
This coverage is for work performed at an authorized Toyota dealer only*. It is subject to the same terms
and conditions set forth in the New Vehicle Limited Warranty Section of the Owner’s Warranty
Information booklet.
*Only authorized Toyota dealerships (and Toyota Certified Collision Centers) are authorized to confirm
if the paint peeling condition is covered by this program. However, after confirming that the paint
peeling condition is covered by this program, the authorized Toyota dealership may choose to
coordinate to have the repainting repair performed by a non-Toyota repair facility (e.g., third-party
collision repair facility, body shop, etc.).
FAQ Page 5 of 8
© 2022 Toyota Motor Sales, USA
Q6:
What if my vehicle’s paint is peeling from this condition, but my vehicle has damage that requires repair
prior to repairing the peeling condition?
A6:
This Customer Support Program only provides the coverage described above. This program does not
cover the repair of damage (e.g., collision damage, dents, etc.) which may be required to complete
the Customer Support Program repair. Some dealers may be willing to repair damage needed to
complete this Customer Support Program. If your dealer is willing to do so, you will be responsible for
any costs associated with the damage repair. If you elect not to repair the damage, the dealer may
indicate that they are not able to complete the Customer Support Program repair.
Q7:
What should I do if the factory-applied Blizzard Pearl or Super White paint is currently peeling from
this condition?
A7:
If an owner thinks that he/she has experienced the condition described in this Customer Support
Program, a local Toyota dealer should be contacted for appropriate diagnosis and repair. If the
condition is verified as being in accordance with the terms of the program, the repair will be performed
FREE OF CHARGE to the owner. Note that after confirming that the paint peeling condition is covered
by this program, the authorized Toyota dealership may choose to coordinate to have the repainting
repair performed by a non-Toyota repair facility (e.g., third-party collision repair facility, body shop,
etc.).
Q7a:
What if the diagnosis is performed and my vehicle is not covered by the Customer Support
Program?
A7a:
Please be aware that, if the condition is not covered by this Customer Support Program, you
may be responsible for the initial diagnostic fees and any other repairs you may decide to have
performed. Any authorized Toyota Dealership can determine if a condition is covered by this
Customer Support Program.
Q8:
A8:
Q9:
A9:
Q10:
A10:
What if an owner HAS NOT experienced this condition but would like to have the repair completed?
This Customer Support Program only applies to vehicles that have exhibited the condition described
above. If an owner has not experienced the condition, he/she is asked to tear off the sheet included in
the owner letter and insert it into the Owner’s Warranty Information Booklet for future reference.
Do I need to wait until I receive an owner notification letter before visiting a dealer to receive a repair?
No. you may visit any authorized Toyota dealer for diagnosis if your vehicle is exhibiting the condition
and, if applicable, repair.
What is involved in the repair?
If the condition is verified as being in accordance with the terms of the program, the specific metal
panel affected will be repainted. Your vehicle will not be completely repainted under this program.
FAQ Page 6 of 8
© 2022 Toyota Motor Sales, USA
Q10a:
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Z2G_Dealer_Lette
Replacement Service Bulletin Number:
MFR Communication Date: 2022-11-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.