T-SB-0099-22

November 9, 2022

2023 GR Corolla Pre-Delivery Service (PDS)
Service
Category

General

Section

Pre-Delivery Service

Market USA

Applicability
YEAR(S)

MODEL(S)

2023

GR Corolla

ADDITIONAL INFORMATION

Introduction

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer
feedback indicates the following areas deserve special attention when performing PDS:





Careful inspection for paint chips/scratches and body dents/dings.
Proper operation of electrical accessories (including interior light, clock, and radio reset).
Interior cleanliness.
Proper function of mechanical systems.

Customer retention and proper maintenance of vehicles are and have always been a major focus
for Toyota. To help remind customers that regular service is essential to the proper maintenance
of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing
this, customers will be reminded to return to your dealership for service. Your current service
reminder sticker may be used. (See PDS Check Sheet item 8 of “Final Inspection and Cleaning.”)
This bulletin contains the PDS procedures that apply specifically to 2023 model year GR Corolla
vehicles. A universal PDS Check Sheet that contains PDS steps that apply to all 2023 model year
Toyota vehicles has been developed. To properly perform a complete PDS, you must complete
all procedures contained in this TSB as well as the universal PDS Check Sheet.
In addition, if the vehicle is stored for over 30 days, be sure to follow Long-Term Vehicle
Storage Guidelines.

© 2022 Toyota Motor Sales, USA

Page 1 of 11

T-SB-0099-22

November 9, 2022

Page 2 of 11

2023 GR Corolla Pre-Delivery Service (PDS)
Warranty Policy

If the need for additional repairs or adjustment is noted during PDS, the required service should
be performed under warranty. Reimbursement will be managed under the warranty policy.
The Warranty Policy and Procedures Manual requires that you maintain the completed
Check Sheet in the customer’s file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject
to debit.
An additional Repair Order completed in conjunction with normal PDS MUST have time
punch/flags for service. If multiple repairs are performed, separate time flags MUST be punched
for each repair.

Warranty Information
OP CODE

DESCRIPTION

MODEL

TIME

OFP

T1

T2

001013

Pre-Delivery Service (PDS)

GR Corolla

1.0

–

–

–

Required Tools & Equipment
REQUIRED EQUIPMENT

SUPPLIER

Techstream ADVi*

QTY

TSADVUNIT

Techstream 2.0
Techstream Lite

PART NUMBER

TS2UNIT
ADE

Techstream Lite (Green Cable)

TSLITEPDLR01
TSLP2DLR01

*Essential SST.

NOTE
 Only ONE of the Techstream units listed above is required.
 Software version 17.20.013 or later is required.
 Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787.

© 2022 Toyota Motor Sales, USA

1

T-SB-0099-22

November 9, 2022

Page 3 of 11

2023 GR Corolla Pre-Delivery Service (PDS)
Procedures



D/C Cut Fuse Installation .........................................................................................................3



Head Unit System Reset .........................................................................................................4



Customize ACC Function ........................................................................................................4



Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation* ...................5



Front License Plate and Mounting Bracket Installation* ...........................................................7



Spring Spacer Removal ...........................................................................................................9



Installation of Rubber Body Plugs*.........................................................................................10



Tire Pressure Warning System (TPWS) Initialization .............................................................11



Dealer Contact Information for Call Dealer Head Unit Function .............................................11



Set Hybrid Radio Feature to OFF ..........................................................................................11



Navigation — Set Date & Time by GPS .................................................................................11

*If applicable.

D/C Cut Fuse Installation

To minimize battery discharge, the D/C cut fuse (30A) has been removed and is stored in the
blank space of the engine compartment relay block. Install the D/C cut fuse (30A) and confirm
ALL related Diagnostic Trouble Codes (DTCs) are cleared.
Figure 1.

1

3
2

1

Relay Block

2

Remove D/C Cut Fuse (30A)

3

Install D/C Cut Fuse (30A)

© 2022 Toyota Motor Sales, USA

T-SB-0099-22

November 9, 2022

Page 4 of 11

2023 GR Corolla Pre-Delivery Service (PDS)
Head Unit System Reset

Before selling a Toyota vehicle, please confirm that the welcome screen with language options
appears on the head unit display when ignition is switched to the ON position. There may be
instances where the welcome screen with language options may not properly appear on the
head unit display.
If the welcome screen showing language options is not displayed, complete the following steps:
1.
2.
3.
4.

Select the Settings option (gear icon).
Scroll down and select the Info & Security option.
The System Reset dialogue box will appear. Select Reset to confirm the resetting of system.
Confirm that the welcome screen with language options is now displayed.

Customize ACC Function

The pre-startup function detects when a user enters the vehicle and energizes the audio head
unit (+BA) so that the multimedia system can quickly be used. This function is not enabled at the
factory to reduce parasitic current draw in transit and storage. To enable this function, it is
necessary to set the ACC customization function in the navigation display to OFF.
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Enter the following menus: Settings – Vehicle Customization – Utility – ACC Customize.
3. Change the setting to OFF (toggle at left with gray background).

© 2022 Toyota Motor Sales, USA

T-SB-0099-22

November 9, 2022

Page 5 of 11

2023 GR Corolla Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation

1. Remove the front and rear emergency
towing eyelets from the front
and rear bumpers by turning
them counterclockwise.

Figure 2.

HINT
If it is difficult to loosen the front emergency
towing eyelet, use a steel bar.

1

2

2. Place one of the removed emergency
towing eyelets into the luggage tray in the
luggage compartment.

1

Front Emergency Towing Eyelet

2

Rear Emergency Towing Eyelet

Figure 3.

HINT
Dispose of the other removed emergency
towing eyelet.

1

1

© 2022 Toyota Motor Sales, USA

Emergency Towing Eyelet

T-SB-0099-22

November 9, 2022

Page 6 of 11

2023 GR Corolla Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)

3. Install the front and rear emergency
towing eyelet hole covers, which are