66 07 19 50

10

0086

Replace Flying “B” elevating assembly

66 07 19 50

10

0030

0040
0067
0072

0080

Parts information
“Tri-Flow” industrial lubricant or similar low viscosity, penetrating lubricant containing Polytetrafluoroethylene (PTFE) – source locally (See the
attached Tri-Flow data sheet)
Proprietary metal polish – source locally.
Proprietary paint polish – source locally.

INTERNAL

REVISION DATE: 18-08-2004

SAFETY DATA SHEET
TRIFLOW LUBRICANT AEROSOL
1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/
UNDERTAKING
PRODUCT NAME

TRIFLOW LUBRICANT AEROSOL

PRODUCT NO.

32396

SYNONYMS, TRADE NAMES

(SPN 10175)

APPLICATION

Lubricant

SUPPLIER

Tri-Flow
Thorncliffe Park
Chapeltown
Sheffield
S35 2YP
[email protected]

EMERGENCY TELEPHONE

Tel +44 (0) 114 246 7171 Fax +44 (0) 114 245 5629

2 COMPOSITION/INFORMATION ON INGREDIENTS
Name

EC No.

CAS-No.

Content

Classification

2-(Methoxymethylethoxy)-propanol

252-104-2

34590-94-8

1-2.5%

BUTANE

203-448-7

106-97-8

10-30%

F+;R12

NAPHTHA (PETROLEUM), HYDROTREATED
HEAVY.
PENTYL ACETATE

265-150-3

64742-48-9

2.5-10%

Xn;R65. R10,R66.

211-047-3

628-63-7

1-2.5%

R10 R66

PROPANE

200-827-9

74-98-6

10-30%

F+;R12

WHITE SPIRIT

265-185-4

64742-82-1

10-30%

Xn;R65. N;R51/53. R10,R66.

The Full Text for all R-Phrases are Displayed in Section 16

3 HAZARDS IDENTIFICATION
Extremely flammable. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Repeated exposure may cause skin dryness or cracking.
CLASSIFICATION
F+;R12. R52/53,R66.

4 FIRST-AID MEASURES
GENERAL INFORMATION

In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious
person.
INHALATION

Remove to fresh air, keep the patient warm and at rest. If breathing has stopped administer artificial respiration. Give
nothing by mouth. If unconscious, place in the recovery position and seek medical advice.
INGESTION

If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
SKIN CONTACT

Remove contaminated clothing. Wash skin thoroughly with soap and water, or use a proprietary skin cleanser. Do NOT
use solvents or thinners. Seek medical advice if any irritation persists.
EYE CONTACT

Contact lenses should be removed. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids
apart, and seek medical advice.

5 FIRE-FIGHTING MEASURES
1

/5

REVISION DATE: 18-08-2004

TRIFLOW LUBRICANT AEROSOL
EXTINGUISHING MEDIA

Fire can be extinguished using: alcohol resistant foam, carbon dioxide (CO2), powder, water spray/ mist. Do not use water
jet. Cool aerosol containers exposed to heat with water spray and remove container, if no risk is involved.
SPECIAL FIRE FIGHTING PROCEDURES

Fire will produce dense black smoke containing hazardous products of combustion (see Section 10). Exposure to
decomposition products may be hazardous to health. Appropriate self-contained breathing apparatus may be required.
Cool closed containers exposed to fire with water spray. Do not allow run-off from fire fighting to enter drains or
watercourses.

6 ACCIDENTAL RELEASE MEASURES
SPILL CLEAN UP METHODS

Exclude sources of ignition and ventilate the area. Exclude non-essential personnel. Avoid breathing vapours. Refer to
protective measures listed in Section 7 and 8. Contain and collect spillage with non-combustible absorbent materials, e.g.
sand, earth or vermiculite, and place in a suitable container for disposal in accordance with the waste regulations (see
Section 13). Clean preferably with a detergent; avoid the use of solvents. If the product enters drains or sewers,
immediately contact the local water company; in the case of contamination of streams, rivers or lakes, the relevant
environment agency.

7 HANDLING AND STORAGE
USAGE PRECAUTIONS

Vapours are heavier than air and may spread along floors. They may form explosive mixtures with air. Prevent the
creation of flammable or explosive concentrations of vapour in air and avoid vapour concentrations higher than the
occupational exposure limits. Container must be kept tightly closed. Keep away from heat, sparks and open flame. Avoid
skin and eye contact. Smoking, eating and drinking should be prohibited in areas of storage and use.
For Occupational Exposure Controls, refer to Section 8.
The Manual Handling Operations Regulations may apply to the handling of containers/packages of this product.
STORAGE PRECAUTIONS

Aerosol cans: Must not be exposed to direct sunlight or temperatures above 50°C. Keep upright. Observe the label
precautions. Store between 5°C and 25°C. Keep in a cool, dry, well ventilated place, away from sources of heat, ignition
and direct sunlight. No smoking.
The principles contained in the HSE Guidance Note: Storage of Packaged Dangerous Substances, should be observed
when storing this product. Always keep in containers made of the same material as the supply container.
To avoid the risk of spillage, always store and transport in a secure and upright position.

8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Name
PROPANE

Std
OES

LT - ppm
Asphyxiating

LT - mg/m3
Asphyxiating

ST - ppm
Asphyxiating

ST - mg/m3
Asphyxiating

BUTANE

OES

600 ppm

1450 mg/m3

750 ppm

1810 mg/m3

PENTYL ACETATE

OES

50 ppm

270 mg/m3

100 ppm

541 mg/m3

WHITE SPIRIT

SUP

2-(Methoxymethylethoxy)-propanol

OES

50 ppm(Sk)

NAPHTHA (PETROLEUM), HYDROTREATED
HEAVY.

SUP

1000 ppm

350 mg/m3

No std.

No std.

INGREDIENT COMMENTS

OEL's are taken from the current version of EH40 except those marked 'SUP', which are assigned by the supplier of the
substance.
ENGINEERING MEASURES

Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust
ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and/or solvent
vapours below the relevant occupational exposure limits, suitable respiratory protective equipment should be worn.
RESPIRATORY EQUIPMENT

If exposure to hazardous substances identified above cannot be controlled by the provision of local exhaust ventilation and
good general extraction, suitable respiratory protective equipment should be worn.
HAND PROTECTION

When skin exposure may occur, advice should be sought from glove suppliers on appropriate types. Barrier creams may
help to protect exposed areas of skin but are not substitutes for full physical protection. They should not be applied once
exposure has occurred.
EYE PROTECTION

Eye protection designed to protect against liquid splashes should be worn.
2

/5

REVISION DATE: 18-08-2004

TRIFLOW LUBRICANT AEROSOL
OTHER PROTECTION

Cotton or cotton/synthetic overalls or coveralls are normally suitable. Grossly contaminated clothing should be removed
and the skin washed with soap and water or a proprietary skin cleaner. Do not use solvents or thinners as skin cleaning
agents.
All personal protective equipment, including respiratory protective equipment, used to control exposure to hazardous
substances must be selected to meet the requirements of the COSHH Regulations.

9 PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE

Aerosol

COLOUR

Light to medium brownish.

ODOUR

Characteristic solvent type.

SOLUBILITY

Immiscible with water.

FLASH POINT (°C)

< 0 CC (Closed cup).

10 STABILITY AND REACTIVITY
STABILITY

Stable if stored under recommended storage and handling conditions.
CONDITIONS TO AVOID

Avoid heat, flames and other sources of ignition. Keep away from oxidising agents and strongly alkaline and strongly
acidic materials to prevent the possibility of exothermic reaction.
HAZARDOUS DECOMPOSITION PRODUCTS

In a fire, hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide and alcohols may be
produced.

11 TOXICOLOGICAL INFORMATION
TOXICOLOGICAL INFORMATION

There is no data available on the product itself. The product has been assessed following the conventional method in CHIP
and is classified for toxicological hazards accordingly. This takes into account, where known, delayed and immediate
effects and also chronic effects from components from short-term and long-term exposure by oral, inhalation and dermal
routes of exposure and eye contact. See Sections 3 and 15 for details of the resulting hazard classification.
Exposure to organic solvent vapours in excess of the stated occupational exposure limit may result in adverse health
effects such as irritation of the mucous membrane and the respiratory system and adverse effects on the kidney, liver and
central nervous systems. Symptoms and signs include headache, dizziness, fatigue, muscular weakness, drowsiness and
in extreme cases loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin.
Repeated or prolonged contact with the product may lead to removal of natural fats from the skin resulting in non-allergic
contact dermatitis and absorption through the skin. Splashes in the eyes may cause irritation and reversible local damage.

12 ECOLOGICAL INFORMATION
ECOTOXICITY

The product has been assessed following the conventional method in CHIP and is classified for ecological hazards
accordingly. See Sections 3 and 15 for details.
DEGRADABILITY

There is no data available on the product itself.
ACUTE FISH TOXICITY

There is no data available on the product itself.
WATER HAZARD CLASSIFICATION

There is no data available on the product itself. The product should not be allowed to enter drains or watercourses, or be
deposited where it can affect ground or surface waters.

13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS

Do not allow into drains or watercourses, or dispose of where ground or surface waters may be affected. Wastes, including
emptied containers, are controlled wastes and should be disposed of in accordance with regulations made under the
Control of Pollution Act and the Environmental Protection Act. Using information provided in this data sheet, advice should
be obtained from the Waste Regulation Authority whether the Special Waste Regulations apply.

14 TRANSPORT INFORMATION
3

/5

REVISION DATE: 18-08-2004

TRIFLOW LUBRICANT AEROSOL
GENERAL

Transport within user's premises: always transport in closed containers that are upright and
secure. Ensure that person's transporting the product know what to do in an accident or
spillage.
Limited Quantity concessions may apply to the carriage of this product.

PROPER SHIPPING NAME

AEROSOLS

UN NO. ROAD

1950

ADR CLASS

Class 2: Gases

ADR PACK GROUP

5F

UN NO. SEA

1950

IMDG CLASS

2.1

MARINE POLLUTANT

Yes.

15 REGULATORY INFORMATION
LABELLING

Extremely
Flammable
RISK PHRASES

R12
R52/53
R66

Extremely flammable.
Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
Repeated exposure may cause skin dryness or cracking.

SAFETY PHRASES

S23A
U3
S2
S46
S51
S24/25
S16
S37

Do not breathe gas/fumes/vapour/spray.
Before use, refer to the safety data sheet.
Keep out of the reach of children
If swallowed, seek medical advice immediately and show this container or label
.
Use only in well-ventilated areas.
Avoid contact with skin and eyes.
Keep away from sources of ignition - No smoking.
Wear suitable gloves.

UK REGULATORY REFERENCES

The information contained in this safety data sheet does not constitute the user's own assessment of workplace risks as
required by other health and safety legislation. The provisions of the Health and Safety at Work etc. Act and the Control of
Substances Hazardous to Health Regulations apply to the use of this product at work.
The Manual Handling Operations Regulations
The Chemicals (Hazard Information and Packaging for Supply) Regulations.
The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations.
The Merchant Shipping (Dangerous Goods and Marine Pollutants) Regulations.
European Agreement concerning the International Carriage of Dangerous Goods by Road [ADR]
EU DIRECTIVES

Dangerous Preparations Directive 88/379 Safety Data Sheet Directive 91/155 Dangerous Substance Directive 67/548
GUIDANCE NOTES

Occupational Exposure Limits EH40
CEPE Guidance to 2001 Editions of ADR and IMDG Code.
4

/5

REVISION DATE: 18-08-2004

TRIFLOW LUBRICANT AEROSOL
16 OTHER INFORMATION
GENERAL INFORMATION

The information contained in this safety data sheet is based on the present state of knowledge and current national
legislation. It provides guidance on health, safety and environmental aspects of the product and should not be construed
as any guarantee of technical performance or suitability for particular applications.
The product should not be used for purposes other than those shown in section 1 without first referring to the supplier and
obtaining written handling instructions. As the specific conditions of use of the product are outside the supplier's control,
the user is responsible for ensuring that the requirements of relevant legislation are complied with.
PTFE LUBRICANT POWDERS
Smoking materials should not be taken into the work area. Smoking materials should not be subsequently handled before
the operators have washed their hands. If sprayed onto hot surfaces, or if the coating is heated (over 200C), good exhaust
ventilation must be provided.
For specitic guidance, please contact Tri-flow Sales Department .
REVISION COMMENTS

New format - no data change.
REVISION DATE

18-08-2004

REV. NO./REPL. SDS
GENERATED
SDS NO.

111160/1
10175/0

SAFETY DATA SHEET STATUS

Approved.
SIGNATURE

K. R. P. Winder.

RISK PHRASES IN FULL

R10

Flammable.

R12
R51/53
R65
R66

Extremely flammable.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Harmful: may cause lung damage if swallowed.
Repeated exposure may cause skin dryness or cracking.

Information contained in this Safety Data Sheet is based on data considered to be accurate at the time of its preparation. Despite our
efforts, it may not be up to date or applicable to the circumstances of any particular case. ,
The supplier accepts no responsibility whatsoever (except otherwise provided in law) for any damage or injury resulting from
abnormal use, from any failure to follow appropriate practices or from hazards inherent in the product.
DISCLAIMER
5

/5