NHTSA ID Number: 10223556
Manufacturer Communication Number: S2008000075
TSB/Document Date: 2022-10-17
Summary
No Start, Start Stop Inoperative, Cluster Messages to Service Shifter or Service Start Stop System
STAR ONLINE PUBLICATION
Case Number: S2008000075
Release Date:
06/25/2020
Symptom/Vehicle Issue: No Start, Start Stop Inoperative, Cluster Messages to Service Shifter
or Service Start Stop System
Customer Complaint/ Technician Observation: Customer may observe A Service
Start/Stop message/Start Stop INOP or Service Shifter message and a no start condition. The
condition may have appeared after a recent jump starting of the vehicle contributed from a condition
of limited drive cycles not charging the Main and AUX batteries.
Technician observed: DTC P00FD BATTERY -B- STATE OF CHARGE PERFORMANCE
Auxiliary Battery Disconnected: During an initial key start, the Power Control Relay is
commanded on (open) and the Auxiliary Battery SOC is evaluated. If the Fused B+ voltage to
the Powertrain Control Module (PCM) is so low aprox 8.0 volts that the PCM experiences a
reset during the initial key-on or engine crank event, the PCM will set P00FD and ESS will be
disabled.
The diagnostic for the P00FD fault is basically designed to detect a discharging,
discharged or disconnected Auxiliary Battery any time there is a disconnect between the
two Batteries. It detects this if the Fused B+ voltage to the PCM drops low enough to cause a
PCM reset when disconnected from the Main/Cranking Battery. This fault will detect a faulty
Auxiliary Battery, or wiring issue between the Auxiliary Battery, PDC and Battery Supply circuit
and the PCM.
Repair Procedure:
Set Conditions:
The Powertrain Control Module (PCM) detects that the Auxiliary Battery is disconnected at
initial key crank event.
The PCM detects that the Auxiliary Battery voltage is below 7.98 volts during an ESS AutoStart event.
The PCM detects that the Auxiliary Battery voltage is below 10.30 volts during an ESS AutoStart event and the counter has reached 10 counts.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA
US LLC
Version 4.2 02/06/2017
STAR ONLINE PUBLICATION
Battery Testing:
When testing the auxiliary battery (if equipped), BOTH battery negative cables must be disconnected.
NOTE: If the vehicle is equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS
connector first before disconnecting the negative battery cable.
Caution: When testing multiple batteries disconnect the auxiliary battery ground cable before
testing the main battery to avoid false battery test results. Main battery SOC can be viewed in the
BCM data. Verify the static battery SOC (State Of Charge) readings for the Primary battery,
document readings on repair order. Target BCM battery SOC for ESS should be greater than 65%.
Vehicles that have had recent limited driving miles or had to be jumped started may set DTC P00FD and may require additional battery charging to properly clear the DTC. Refer to service
diagnostics, battery charging tables to ensure properly charged batteries prior to further testing.
Vehicles that have DTC - P00FD reoccur, use the below DTC set list to further test and resolve.
Possible cause list to review for DTC’s that may return.
Possible Causes
OPEN FUSE IN BATTERY JUMP POST TERMINAL
PCR CONTROL RELAY OUTPUT CIRCUIT SHORTED TO VOLTAGE
POOR CONNECTION AT THE VEHICLE BATTERY POSITIVE OR NEGATIVE CABLE ENDS
HIGH RESISTANCE IN THE VEHICLE BATTERY POSITIVE CABLE
HIGH RESISTANCE IN THE VEHICLE BATTERY GROUND
HIGH RESISTANCE IN THE FUSED B+ CIRCUIT TO THE PCM
POWER CONTROL RELAY (PCR) STUCK ON (OPEN)
PCR CONTROL RELAY (ON PCB IN PDC) STUCK ON
FAULTY VEHICLE BATTERY
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does
not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be
similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate
course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no
solution is found
FCA US LLC
Version 4.2 02/06/2017
- Fits for GM Turbo 350 Automatic Transmissions
- 12" Chrome Shifter Arm
- Gated Lock-Out Safety Feature
- Gated Lock-Out Safety Feature
- Note: This Shifter Mounts Directly on the Transmission...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: S2008000075
Replacement Service Bulletin Number:
MFR Communication Date: 2020-06-25
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.