NHTSA ID Number: 10220400
Manufacturer Communication Number: SIL-10-TR-99
TSB/Document Date: 2022-09-26
Summary
Details transmission fluid types and service intervals.
General***†
Severe****†
25,000 Miles
(40 000 km)
1000 Hours
12 Months
12,000 Miles
(20 000 km)
500 Hours
6 Months
See www.allisontransmission.com for a list of Allison Approved TES 389® fluids.
* Anything other than 100 percent concentration of Allison Approved TES 295® fluid is considered a mixture and should utilize Allison
Approved TES 389® fluids change intervals.
*** General Vocation: less than one (1) stop per mile.
**** Severe Vocation: more than one (1) stop per mile.
** For additional information regarding the polyester internal filter see the latest revision of SIL 9-TR-01.
† When an Allison recommended high-efficiency filter is used, the change interval is not until the Change Filter light indicates the filter is
contaminated or until it has been in use for 3 years, whichever occurs first. No mileage restrictions apply. High-efficiency filters are only
approved for use with AT/MT/HT Series.
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
SIL 10-TR-99, Rev. AA
August 11, 2022
Page 20 of 25
Table 20. Recommended Fluid Change Intervals
NOTE: Refer to Table 14 for Filter Change Intervals, Table 16 for Filter and Gasket Kit Information and Table 17
for Fluid Capacity Information.
NOTE: Change fluid at or before recommended mileage, months, or hours have elapsed, whichever occurs first.
NOTE: Local conditions, severity of operation or duty cycle may require more or less frequent fluid change intervals
that differ from the published recommended fluid change intervals of Allison Transmission. Allison Transmission
recommends that customers use fluid analysis as the primary method for determining fluid change intervals. In the
absence of a fluid analysis program the fluid change intervals listed in the charts should be used.
Fluid Change Intervals
100 Percent Concentration Allison Approved
TES 295® Fluids*
Allison Approved TES 389® Fluids*
General**
Severe***
General**
Severe***
100,000 Miles
(160 000 km)
4000 Hours
48 Months
50,000 Miles
(80 000 km)
2000 Hours
24 Months
25,000 Miles
(40 000 km)
1000 Hours
12 Months
12,000 Miles
(20 000 km)
500 Hours
6 Months
See www.allisontransmission.com for a list of Allison Approved TES 389® fluids.
* Anything other than 100 percent concentration of Allison Approved TES 295® fluid is considered a mixture and should utilize Allison
Approved TES 389® fluids change intervals.
** General Vocation: less than one (1) stop per mile.
*** Severe Vocation: more than one (1) stop per mile.
Table 21. Filter and Gasket Kits
NOTE: See the latest revision of SIL 9-TR-01 for additional information.
Filter and Gasket Kits
Pan
Oil Filter and Gasket Kit Part Number
97 mm (3.8 inch) oil pan
29540976
135 mm (5.3 inch) oil pan
29538489
Table 22. Fluid Capacity
Capacities (Approximate)*
Pan Depth
Initial Fill**
Liters (Quarts)
97 mm (3.8 inch) oil pan
8.5 (9)
135 mm (5.3 inch) oil pan
15 (16)
* Fluid fill capacity is dependent on vehicle configuration. Final fluid capacity must be determined by dipstick level (see Mechanic’s Tips
MT1321EN Section 1 or your Operator’s Manual under “Care and Maintenance”
** Approximate quantities, do not include external lines and cooler hose
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
SIL 10-TR-99, Rev. AA
August 11, 2022
Page 21 of 25
Appendix F. MT 600 Series Filter Change/Fluid Change Intervals
Table 23. Recommended Filter Change Intervals
NOTE: Refer to Table 19 for Fluid Change Intervals, Table 20 for Filter and Gasket Kit Information, and Table 21
for Fluid Capacity Information.
NOTE: Change filters at or before recommended mileage, months, or hours have elapsed, whichever occurs first.
NOTE: Local conditions, severity of operation or duty cycle may require more or less frequent fluid change intervals
that differ from the published recommended fluid change intervals of Allison Transmission. Allison Transmission
recommends that customers use fluid analysis as the primary method for determining fluid change intervals. In the
absence of a fluid analysis program the fluid change intervals listed in the charts should be used.
Filter Change Intervals
100 Percent Concentration Allison Approved
TES 295® Fluids *
Internal Filter
General**
Severe***
Overhaul
Overhaul
Lube/Auxiliary Filter
Initial
5000 Miles
(8000 km)
200 Hours
General**†
Severe***†
50,000 Miles
(80 000 km)
2000 Hours
24 Months
25,000 Miles
(40 000 km)
1000 Hours
12 Months
Allison Approved TES 389® Fluids
Internal Filter
General**
Severe***
Overhaul
Overhaul
*
Lube/Auxiliary Filter
Initial
5000 Miles
(8000 km)
200 Hours
General**†
Severe***†
25,000 Miles
(40 000 km)
1000 Hours
12 Months
12,000 Miles
(20 000 km)
500 Hours
6 Months
See www.allisontransmission.com for a list of Allison Approved TES 389® fluids.
* Anything other than 100 percent concentration Allison Approved TES 295® fluid is considered a mixture and should utilize Allison
Approved TES 389® fluids change intervals.
** General Vocation: less than one (1) stop per mile.
*** Severe Vocation: more than one (1) stop per mile.
† When an Allison recommended high-efficiency filter is used, the change interval is not until the Change Filter light indicates the filter is
contaminated or until it has been in use for 3 years, whichever occurs first. No mileage restrictions apply. High-efficiency filters are only
approved for use with AT/MT/HT Series.
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
SIL 10-TR-99, Rev. AA
August 11, 2022
Page 22 of 25
Table 24. Recommended Fluid Change Intervals
NOTE: Refer to Table 18 for Filter Change Intervals, Table 20 for Filter and Gasket Kit Information, and Table 21
for Fluid Capacity Information.
NOTE: Change fluid at or before recommended mileage, months, or hours have elapsed, whichever occurs first.
NOTE: Local conditions, severity of operation or duty cycle may require more or less frequent fluid change intervals
that differ from the published recommended fluid change intervals of Allison Transmission. Allison Transmission
recommends that customers use fluid analysis as the primary method for determining fluid change intervals. In the
absence of a fluid analysis program the fluid change intervals listed in the charts should be used.
Fluid Change Intervals
100 Percent Concentration Allison Approved
TES 295® Fluids *
Allison Approved TES 389® Fluids
*
General**
Severe***
General**
Severe***
100,000 Miles
(160 000 km)
4000 Hours
48 Months
50,000 Miles
(80 000 km)
2000 Hours
24 Months
25,000 Miles
(40 000 km)
1000 Hours
12 Months
12,000 Miles
(20 000 km)
500 Hours
6 Months
See www.allisontransmission.com for a list of Allison Approved TES 389® fluids.
*Anything other than 100 percent concentration Allison Approved TES 295® fluid is considered a mixture and should utilize Allison Approved
TES 389® fluids change intervals.
** General Vocation: less than one (1) stop per mile.
***Severe Vocation: more than one (1) stop per mile.
Table 25. Filter and Gasket Kit
NOTE: See the latest revision of SIL 4-TR-01 for additional information.
Filter and Gasket Kit
Oil Filter and Gasket Kit Part Number
29538489
Table 26. Fluid Capacity
Capacities (Approximate)
Pan Depth
*
Initial Fill**
Liters (Quarts)
110 mm (4.3 inch) oil pan
11 (12)
130 mm (5.1 inch) oil pan
14 (15)
* Fluid fill capacity is dependent on vehicle configuration. Final fluid capacity must be determined by dipstick level (see Mechanic’s Tips
MT1357EN Section 1 or your Operator’s Manual under “Care and Maintenance”
** Approximate quantities, do not include external lines and cooler hose
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
SIL 10-TR-99, Rev. AA
August 11, 2022
Page 23 of 25
Appendix G. HT 700 Series Filter Change/Fluid Change Intervals
Table 27. Recommended Filter Change Intervals
NOTE: Refer to Table 23 for Fluid Change Intervals, Table 24 for Filter and Gasket Kit Information, and Table 25
for Fluid Capacity Information.
NOTE: Change filters at or before recommended mileage, months, or hours have elapsed, whichever occurs first.
Filter Change Intervals
100 Percent Concentration Allison Approved
TES 295® Fluids*
Main Filter
Internal
Filter
Overhaul
General**
Severe***
50,000
Miles
(80 000
km)
2000
Hours
24 Months
25,000
Miles
(40 000
km)
1000
Hours
12 Months
Lube/Auxiliary Filter
Initial
5000 Miles (8000 km)
200 Hours
General**†
Severe***†
50,000
Miles
(80 000
km)
2000
Hours
24 Months
25,000
Miles
(40 000
km)
1000
Hours
12 Months
Allison Approved TES 389® Fluids*
Main Filter
Internal
Filter
Overhaul
General**
Severe***
25,000
Miles
(40 000
km)
1000
Hours
12 Months
12,000
Miles
(20 000
km)
500 Hours
6 Months
Lube/Auxiliary Filter
Initial
5000 Miles (8000 km)
200 Hours
General**†
Severe***†
25,000
Miles
(40 000
km)
1000
Hours
12 Months
12,000
Miles
(20 000
km)
500 Hours
6 Months
See www.allisontransmission.com for a list of Allison Approved TES 389® fluids
* Anything other than 100 percent concentration of Allison Approved TES 295® fluid is considered a mixture and should utilize Allison
Approved TES 389® fluids change intervals.
** General Vocation: less than one (1) stop per mile.
*** Severe Vocation: more than one (1) stop per mile.
† When an Allison recommended high-efficiency filter is used, the change interval is not until the Change Filter light indicates the filter is
contaminated or until it has been in use for 3 years, whichever occurs first. No mileage restrictions apply. High-efficiency filters are only
approved for use with AT/MT/HT Series.
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
SIL 10-TR-99, Rev. AA
August 11, 2022
Page 24 of 25
Table 28. Recommended Fluid Change Intervals
NOTE: Refer to Table 22 for Filter Change Intervals, Table 24 for Filter and Gasket Kit Information, and Table 25
for Fluid Capacity Information.
NOTE: Change fluid at or before recommended mileage, months, or hours have elapsed, whichever occurs first.
NOTE: Local conditions, severity of operation or duty cycle may require more or less frequent fluid change intervals
that differ from the published recommended fluid change intervals of Allison Transmission. Allison Transmission
recommends that customers use fluid analysis as the primary method for determining fluid change intervals. In the
absence of a fluid analysis program the fluid change intervals listed in the charts should be used.
Fluid Change Intervals
100 Percent Concentration Allison Approved
TES 295® Fluids *
Allison Approved TES 389® Fluids*
General**
Severe***
General**
Severe***
100,000 Miles
(160 000 km)
4000 Hours
48 Months
50,000 Miles
(80 000 km)
2000 Hours
24 Months
25,000 Miles
(40 000 km)
1000 Hours
12 Months
12,000 Miles
(20 000 km)
500 Hours
6 Months
See www.allisontransmission.com for a list of Allison Approved TES 389® fluids
*Anything other than 100 percent concentration of Allison Approved TES 295® fluid is considered a mixture and should utilize Allison
Approved TES 389® fluids change intervals.
**General Vocation: less than one (1) stop per mile.
***Severe Vocation: more than one (1) stop per mile.
Table 29. Filter and Gasket Kit
Filter and Gasket Kits
Pan
Filter and Gasket Kit Part Number
114 mm (4.5 inch) Oil Pan
29530562
114 mm (4.5 inch) Oil Pan (With adapter 23016883 and pan
23016884)
29530563
152 mm (6 inch) Oil Pan
6839945
178 mm (7 inch) Oil Pan
29530564
216 mm (8.5 inch) Hydraulic Oil Pan
23012407
216 mm (8.5 inch) Electronic Oil Pan
29530565
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
SIL 10-TR-99, Rev. AA
August 11, 2022
Page 25 of 25
Table 30. Fluid Capacities
Capacities (Approximate)*
Pan Depth
Refill**
Liters (Quarts)
114 mm (4.5 inch) oil pan
32 (34)
152 mm (6 inch) oil pan
28.5 (30)
178 mm (7 inch) oil pan
31 (33)
216 mm (8.5 inch) oil pan
40.5 (42.8)
* Fluid fill capacity is dependent on vehicle configuration. Final fluid capacity must be determined by dipstick level (see Mechanic’s Tips
MT1366EN (Hydraulic Controls) or MT1958EN (Electronics Controls) Section 1 or your Operator’s Manual under “Care and Maintenance”
** Approximate quantities, do not include external lines, and cooler hose
Copyright © 2022 Allison Transmission, Inc. All Rights Reserved.
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SIL-10-TR-99
Replacement Service Bulletin Number:
MFR Communication Date: 2022-08-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool scanner for car newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
and 64GB ROM, serving up to 5X faster than older MAX/
- 【15+ Advanced Reset & Calibration Functions】The Thinkdiag scanner provides 15+ professional maintenance functions, including:✔ Oil Reset | ✔ ABS Bleeding | ✔ Injector Coding | ✔ SAS Reset✔ TPMS Reset | ✔ BMS Reset | ✔ Transmission Adaptation | ✔ AFS Reset | ✔ Sunroof Calibration | ✔ Brake Reset | ✔ Suspension Relearn | ✔ Electronic Throttle Relearn | ✔ Seat Calibration | + More reset/relearn/calibrate/adaptive functions under automotive full systems diagnostic menu. Ideal professional OBDII scanner for mechanics and DIY enthusiasts, Thinkdiag delivers professional OE-level diagnostics with adaptive relearn capabilities for precise vehicle servicing.
- 【Full-System Diagnostics OBD2 Scanner Bluetooth】 Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear DTCs, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It works with most car models after 1996, cover more than 120+ car brands. All car make and reset software come with 1 year update without any charge, much valuable and powerful than 1000 dollars level scanners in the market.
- 【Potential Feature Activation】 Thinkdiag diagnose obd2 scanner Bluetooth allows you to match the replaced components with ECU, activate potential functions for BMW, for GM, for Benz etc. Adjust some annoying features, adapt vehicle's settings to improve performance. No matter you are private owner or professional technician, Thinkdiag is a powerful and handy scanner in your repair tool list. Potential features are not suitable for every car models, please check with us before purchase. This superior function required newest Android OS device, it performs better on Android cell phone.
- 【Bidirectional Test/Active Test】 Thinkdiag car code reader actuates solenoids and actuators for active testing, send commands to systems/components to test their real-time working status, without using manual vehicle controls which saves much diagnostic time and effort to identify malfunction causes. You can check windows, doors, mirrors, sunroof, fans, fuel pump and other parts working status by actuation test function, thinkdiag supports 10000+ active tests. When you process Automotive full system diagnostic, you can do active test on every supported module.
- 【Intelligent Diagnostic Tool with Auto-VIN】Thinkdiag Bluetooth OBD2 scanner makes your smart phone device become a professional vehicle diagnostic tool, it compatible with Android and iOS system. Auto-VIN function supports the Thinkdiag identifies the most car models automatically, if autovin failed, you can choose car info manually. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined 4-in-1 Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.