NUMBER:
GROUP:
DATE:

08-053-16
Electrical
April 29, 2016

This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-031-15 REV. B,
DATED AUGUST 04, 2015, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL
REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** INCLUDES UPDATING
SYMPTOM/CONDITIONS, IMPROVEMENTS AND LABOR OP.
THE wiTECH SOFTWARE IS REQUIRED TO BE AT THE LATEST RELEASE BEFORE
PERFORMING THIS PROCEDURE.
SUBJECT:
Flash: RA3/RA4 Radio Software Enhancements
OVERVIEW:
This bulletin involves inspecting and, if required, updating the radio software.
MODELS:
2015

(WK)

Jeep Grand Cherokee

2015

(KL)

Jeep Cherokee

2015

(LA)

Dodge Challenger

2015

(ZD)

Dodge Viper

2015

(WD)

Dodge Durango

2015

(DS)

Ram 1500 Pickup

2015

(DJ)

Ram 2500 Pickup

2015

(D2)

Ram 3500 Pickup

2015

(DD)

Ram 3500 Cab Chassis

2015

(DP)

Ram 4500/5500 Cab Chassis

2015

(DX)

Ram Truck (Mexico)

2015

(LX)

Chrysler 300

2015

(LD)

Dodge Charger

08-053-16

-2-

NOTE: This bulletin applies to vehicles within the following markets/countries:
NAFTA.
NOTE: This bulletin applies to vehicles equipped with one of the following radios:
•
•

Uconnect 8.4A AM/FM/BT/ACCESS (sales code RA3)
Uconnect 8.4AN AM/FM/BT/ACCESS/NAV (sales code RA4)

SYMPTOM/CONDITION:
A small number of customers may experience one or more of the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

**Poor or no connection to cellular network (U.S. market only).
HVAC temperature out of sync with radio display (KL vehicles).**
Intermittently blind spot chime will not turn off (KL vehicles only).
Enable High Definition (HD) feature (RA4 radios located in Canada and Mexico).
Low battery condition due to the radio remaining powered up after the ignition has
been turned off (U.S Markets Only).
The Radio may switch from SiriusXM to an AM station by itself.
Uconnect registration always present, can not remove Uconnect account.
Teleprompter does not appear when pressing the Voice Recognition (VR) button.
VR operation cancels while in media mode.
Radio may display previous image before displaying the current image.
Navigation lost vehicle position during route calculation.
Navigation displays are missing after vehicle heading changes.
Navigation giving incorrect guidance to exit the highway.
FM audio may switch to AM after ignition cycle.
Text messages appear as sender’s phone number not their name.
VR phone button may not work at times.
Audio muted after AUX device is disconnected.
VR, “ Listen” to text will only play first message.
Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD,
LX and ZD Only).
Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only).
SirusXM station information does not update.
Speed adjusted volume, may not work.
AM or FM seek or tuner soft keys may be missing.
Display screen show ambient temperature as ”- - “ not normal values.

Improvements:
•
•
•
•
•
•
•
•
•
•
•

**User can pair iPhone with Uconnect via Bluetooth and talk to Siri through
Uconnect.
Ability to press VR button for more than one second.**
Faster response time when using the Remote Service App (U.S. market only).
Faster connection time with 911(U.S. market only).
Keyboard improvements in the Points Of Interest (POI) section.
High Definition (HD) radio buffering.
Spanish translation.
Radio station scroll feature.
Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only).
Making assist calls.
App functionality and screen displays.

-3•
•
•
•
•
•
•
•

08-053-16

Displays correct media, song titles and tracks.
Travel Link, Points Of Interest (POI), displaying movies and favorites.
Incoming calls, audio enhancements (LA, LD and LX Only).
Audio for strong AM stations.
VR performance.
Settings can only be changed in run mode, not ACC.
Notify user when messaging features are not supported on certain phones/devices.
Shows direction and distance for POI when using VR.

DIAGNOSIS:
Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available, verify
the Audio system is operating properly. If Audio DTCs are present, record them on the
repair order and repair as necessary before proceeding further with this bulletin.
For all other customers that describe the symptom/condition, perform the Repair
Procedure.
REPAIR PROCEDURE:
CAUTION: This software update is only compatible with the 2015 model year
vehicles listed above. Attempting to flash a 2013-2014 model year vehicle
with this software will result in a loss of some radio/navigation
functions. Should this occur reinstalling the correct software for the
radio will correct the condition.
1. Has the USB flash drive been created?
a. Yes >>> Proceed to Step #4.
b. No >>> Proceed to Step #2.
2. Go to DealerCONNECT> Service> UCONNECT Information & Utilities> Uconnect
Dealer software downloads to down load the files.
3. If a security message appears “Do you want to view only the web page content that
was delivered securely?” press ”NO” to continue (Fig. 1).

Fig. 1 Pop-up Security Message

08-053-16

-4-

NOTE: A blank USB flash drive must be used to download the software. Only one
software update can be used on one USB flash drive.
NOTE: If the dealer cannot download the software, make sure you have proper
security access. If not have the service manager or shop foreman download
the software update.
4. To download the software files to a USB flash drive, follow the on screen instructions
and perform the following.
a. Acquire a blank USB flash drive with at least 4 GB of space.
b. Download the software update file to your local PC's desktop.
c. Be sure to extract the file before copying it to the blank USB flash drive.
d. A blank USB flash drive will be needed one for each radio update, additional
updates can not be on the same USB flash drive.
e. Once the file is saved to the USB flash drive, it is recommended you physically label
the USB flash drive with the bulletin number and proper radio sales codes.
5. With the engine running and radio powered on, insert the correct USB flash drive with
new software into USB port.
6. The next screen display will have the old and new software levels. The radio will be
updated to 16.11.7.
7. Is the radio at software level 16.11.7 or higher?
a. Yes >>> The radio software is already up to date. Normal diagnostics need to be
performed.
b. No >>> The radio software needs to be updated. Proceed to Step #8.
CAUTION: If the radio software level is at or above the level on the USB flash drive,
DO NOT perform the update.
8. Press the soft key “Yes” to start the update.
NOTE: If the software update process is interrupted, aborted or failed, the process
should be restarted.
NOTE: Do not cycle the ignition or touch the radio during the update process.
9. The update may take up to 20 minutes to load. No other actions will be needed to
initiate the update.
10. After the update is done, the screen will display the software levels again.
11. Press “No” and turn the vehicle off. Open and close the driver’s door and let the Bus
go to sleep.
NOTE: Make sure to leave ignition off, do not press the brake and do not reopen any
doors so the modules will go to sleep.
12. Cycle the ignition on, then back off one more time. Open and close the driver’s door
and let the Bus go to sleep. This will complete the radio update.
13. Remove the USB flash drive..
14. Is the vehicle a KL, LA, LD, LX, UF, WD or WK?
a. Yes >>> Proceed to Step #15.
b. No >>> This bulletin has been completed.

-5-

08-053-16

15. Is the vehicle equipped with Blind Spot Monitor/Cross Path Detection (Sales Code
XAN)?
a. Yes >>> Proceed to Step #16.
b. No >>> This bulletin has been completed.
16. Go into the radio Settings menu and select Safety & Driving Assistance. Locate the
Blind Spot Alert feature and verify the “Lights + Chimes” option is turned on.
17. This bulletin has been completed.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor
Operation No:

Description

Skill Category

Amount

**18-60-02-JM

Radio, Check Software Level and
Perform Software Update
(0 - Introduction)

6 - Electrical
and Body
Systems

0.6 Hrs.**

18-60-02-FR

Radio, Software - Create USB Flash
Drive From Uconnect Website (One
time only)
(0 - Introduction

6 - Electrical
and Body
Systems

0.2 Hrs.

NOTE: The “One Time Only” LOP is used one time per dealer when downloading the
software onto a USB flash drive. The dealer can only use the download LOP,
one time for each of the radios listed.
NOTE: The expected completion time for the flash download portion of this
procedure is approximately 21 minutes. Actual flash download times may be
affected by vehicle connection and network capabilities.
FAILURE CODE:
The dealer must choose which failure code to use. If the customer came in with an
issue and the dealer found updated software to correct that issue, use failure code
CC, for all other use failure code RF.
•
•

If the customer’s concern matches the SYMPTOM/CONDITION identified in the
Service Bulletin, failure code CC is to be used.
If an available flash is completed while addressing a different customer concern,
failure code RF is to be used.

CC

Customer Concern

RF

Routine Flash