NHTSA ID Number: 10219495
Manufacturer Communication Number: I-19-02-A/B/C
TSB/Document Date: 2022-09-08
Summary
Indian
Motorcycle has determined that an electrical defect may exist in 2014-2020 Heavyweight Air Cooled Indian Motorcycles, resulting in the unexpected loss of forward lighting. This defect may also cause heat damage to the Vehicle Control Module (VCM) and Pin 11 of the center VCM connector. Indian Motorcycle has released this bulletin with instructions to inspect the VCM connector for damage, update the VCM software, and replace the VCM and pin 11 connector if damaged.
SAFETY BULLETIN
Release Date: May 07, 2019
IND
Communication #: I-19-02-A/B/C
Model Year(s): 2014-2020
— Confidential and Proprietary —
VERSION: R04 (August 29, 2022)
**2015-2020 Heavyweight Air Cooled motorcycles added to the affected population.
Part C has also been added for vehicles that have the VCM reflash completed as part
of a different campaign. Reference Unit Inquiry to ensure all affected motorcycles are
identified and repaired per this Safety Bulletin**
IMPORTANT STOP SALE SAFETY NOTICE!
Stop selling affected vehicles immediately until the repair procedure has
been completed on affected units at your dealership. Federal law prohibits the
sale of products subject to a recall. Selling such products could subject the
seller to substantial penalties.
IMPORTANT
If you are working with a printed copy, please verify you have the most current version of this document.
S U B J E C T : I N D I A N M O T O R C Y C L E - F O R WA R D L I G H T I N G
PURPOSE
Indian Motorcycle has determined that an electrical defect may exist in 2014-2020 Heavyweight Air Cooled Indian
Motorcycles, resulting in the unexpected loss of forward lighting. This defect may also cause heat damage to the
Vehicle Control Module (VCM) and Pin 11 of the center VCM connector.
Indian Motorcycle has released this bulletin with instructions to inspect the VCM connector for damage, update the
VCM software, and replace the VCM and pin 11 connector if damaged.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 1 of 13
AFFECTED MODELS
MODEL YEAR
MODELS
VEHICLE IDENTIFICATION NUMBER
RANGE
2014
Chief Classic, Chief Vintage, Chieftain
2015
Chieftain, Chief Classic, Chief Vintage
2016
Chieftain, Springfield, Chief Vintage
2017
Chief Vintage, Chieftain, Chieftain Dark
Horse, Chieftain Limited, Chieftain Elite,
Springfield
2018
Chief Vintage, Chieftain, Chieftain Classic,
Chieftain Dark Horse, Chieftain Limited,
Chieftain Elite, Springfield
2019
Chief Vintage, Chieftain Classic, Springfield,
Springfield Dark Horse
2020
Chief Vintage, Springfield
Reference Unit Inquiry on the dealer website
or the Service Bulletin list on the STOP site to
lookup affected VINs.
IMPORTANT
Vehicles that had ISA-19-02 performed as an interim solution are still required to have this updated repair solution
performed. Reference Unit Inquiry to determine if a VIN is affected.
C U S T O M E R N O T I F I C AT I O N
Dealers are required to review their sales records and make arrangements with customers for Bulletin completion. In
addition to consumer units, dealers are required to correct any affected units in their inventory. Indian Motorcycle will
be mailing a notification letter to consumers affected by this Bulletin. Indian Motorcycle will also send an email to
owners for whom Polaris has a valid email address.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 2 of 13
WA R R A N T Y C L A I M PA R T S I N F O R M AT I O N
Bulletin parts are excluded from the standard RMA policy and cannot be returned. An Initial Recommended Order
Quantity has not been provided for this bulletin. For more details, refer to University of Polaris training course "Polaris
Item Availability and Daily Ordering" and click on "Bulletin Ordering Training".
NOTICE
Training required for this bulletin is carried forward from the original release in May, 2019. If your dealership
personal is still certified, you will NOT need to retake the training.
NOTICE
• Certain motorcycles will already have the latest VCM software installed and will not require a reflash. These
motorcycles will have their VINs applied to PART C and PART B if damage is found.
• The motorcycles that DO NOT have up to date VCM software will only be applied to PART A and PART B if damage
is found.
VCM CONNECTOR INSPECTION & VCM REFLASH
Bulletin #
Claim Type
I-19-02-A
SB (Service Bulletin)
Labor Allowance
0.6 hours (36 minutes)
Part Number / Description
0000541 (QTY 1) Bulletin Misc Labor
Parts Availability
NA
University of Polaris Training
Required
Yes1
1Polaris
requires one person from a dealership to be certified before parts ordering may occur and two people from
a dealership to be certified before warranty claims may be processed.
VCM & CONNECTOR REPLACEMENT
Bulletin #
Claim Type
I-19-02-B
SB (Service Bulletin)
Labor Allowance
1.0 hours (60 minutes)
Part Number / Description
Additional parts and labor required to complete I-19-02-B to be authorized
through an ASK Polaris case.
Parts Availability
Available to order when directed by ASK Polaris
VCM CONNECTOR INSPECTION
Bulletin #
Claim Type
I-19-02-C
SB (Service Bulletin)
Labor Allowance
0.3 hours (18 minutes)
Part Number / Description
0000541 (QTY 1) Bulletin Misc Labor
Parts Availability
NA
University of Polaris Training
Required
Yes1
1Polaris
requires one person from a dealership to be certified before parts ordering may occur and two people from
a dealership to be certified before warranty claims may be processed.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 3 of 13
ACCESSORY LABOR
Polaris will cover labor for the removal and installation of accessories required to complete the bulletin work. Follow
the steps below to obtain reimbursement.
1. Start a new Ask Polaris Case, Service &Warranty Question > Authorization Request: In Warranty or Polaris ESC or
Authorization Request: Out of Warranty/Goodwill.
2. Enter your contact information and VIN, along with miles and hours into the applicable fields.
3. Enter Indian Motorcycle® I-19-02 in the CONCERN and CAUSE fields. In the CORRECTION field, enter
"ACCESSORY REMOVAL AND INSTALLATION".
4. Enter warranty fail codes 127/277/132.
5. Add part 0000541, quantity 1.
6. Attach photos of the vehicle and accessories sufficient to support the labor time requested.
7. Submit the case to Polaris.
COVERAGE PERIOD
Coverage began on March 3rd, 2020. This bulletin has no expiration date.
PA R T S R E T U R N / D I S P O S A L I N F O R M AT I O N
Under no circumstances shall the parts removed be re-used, sold, or re-purposed for another application. It is your
dealership / distributor’s responsibility to make sure every part replaced (related to this communication) is taken out
of circulation and disposed of properly or returned to Polaris (if required).
SPECIAL TOOLS
• US and Canada Dealers: The special tool outlined in Part B of this Bulletin (PF-52576) was direct-shipped to dealers
in February of 2018 for use with I-18-01. If additional or replacement tools are needed, they can be ordered through
Bosch Automotive Service Solutions, by phone at 1-800-345–2233 or on-line via your dealer website at
https://polaris.service-solutions.com/.
• International Dealers: The special tool outlined in this Bulletin (PF-52576) must be ordered through the Bosch
Service Solutions website. File a Part Stock warranty claim for tool reimbursement.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 4 of 13
I-19-02-A / C VCM PIN INSPECTION
TOOLS REQUIRED
• Digital Wrench® II
• Multilink XP cable
• Battery Tender (minimum 2 amps)
• 5 mm Allen Wrench
• 6 mm Allen Wrench
• In-lb Torque Wrench
• Phillips Screwdriver
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 5 of 13
I-19-02-A / C
VEHICLE CONTROL MODULE (VCM) CONNECTOR PIN 11 INSPECTION
P R E PA R AT I O N
• Lift the trunk latches e to unlock the trunk from the
mount.
IMPORTANT
In the event the following inspection does reveal
damage to Pin 11 of the center VCM connector
(harness side), start an ASK Polaris case for further
instruction as outlined in the I-19-02-B section of this
document.
1. Park the motorcycle on a lift table with the wheel
clamped in a wheel vise.
2. Turn the ignition off.
3. Remove Accessory Trunk, if applicable.
• Remove the left and right saddlebags and remove
the trunk lock fastener t from each trunk latch.
• Lift up on the rear of the trunk r and slide rearward
t to release the trunk from the motorcycle.
• Disconnect the trunk harness multi-plug r.
4. Pull carefully on the side panels to release the
retaining posts from the in-frame grommets.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 6 of 13
5. Using a 5 mm Allen Wrench, remove the rear seat
fastener w.
6. Using a 6 mm Allen Wrench, remove the two
fasteners q securing the seat to the frame.
VCM CONNECTOR PIN 11 INSPECTION
1. Find the VCM located on top of the battery box.
2. Disconnect the center connector on the VCM. Locate
Pin 11 of the VCM1 (center) connector and check for
any discoloration.
7. Lift the rear of the seat and pull rearward to
disengage the front retaining arms from the bracket
behind the fuel tank.
Inspect the male pin on the VCM board for damage.
8. Place the seat upside down on a smooth, clean
surface.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 7 of 13
IMPORTANT
Pay special attention to the white terminal lock plate during inspection. If damage is present, a dark halo will be present
around pin 11 of the VCM connector. Refer to the pictures below for examples.
DAMAGE IS NOT PRESENT
VCM connector, pin 11
DAMAGE IS PRESENT
VCM connector, pin 11
Damage = Any sign of heat damage in or around pin 11 of the center VCM connector (e.g. the dark halo shown in
the right image above).
STOP!
• If damage IS present, take pictures of the damage and proceed to I-19-02-B.
US/CAN: Submit an Ask Polaris Service & Warranty Question> All Vehicle Diagnostic case.
INT’L: Contact your Country Service Department.
• If damage is NOT present, proceed to step 11 to complete I-19-02-A or I-19-02-C.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 8 of 13
A S S E M B LY
11. Install the seat by sliding the seat forward to engage
the retaining arms on the frame into the seat.
15. Install the side panels by aligning the side panel pins
with the in-frame grommets and push inward to
engage.
12. Loosely install both side seat fasteners q.
16. Install Accessory Trunk, if applicable.
13. Loosely install the rear seat fastener w.
CAUTION
Use care when installing the trunk assembly so that no
electrical wires / connectors get pinched.
14. Torque all three seat fasteners to specification.
TORQUE
Seat Fastener:
88 in-lbs (10 N·m)
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 9 of 13
• Lift the flap at the rear of the passenger seat pad to
access the vehicle side of the trunk harness
connector and lay harness on fender.
• Reconnect the trunk harness connector r.
• If applicable, install the mounting fasteners t into
left and right locking levers.
• Slide the trunk forward q onto the mounting
bracket and lower w the rear of the trunk until fully
seated.
• Install saddlebags, if equipped.
17. If a VCM reflash is not needed, file a claim for
I-19-02-C
• Push the trunk locking levers e down until fully
seated and the trunk is held securely in place.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 10 of 13
I - 1 9 - 0 2 - A O N LY
VCM REFLASH
7. Select Vehicle Update.
IMPORTANT
This procedure requires the use of Digital Wrench® II.
Connect a battery tender to the vehicle during the
programming.
1. Park motorcycle on a flat surface, fully extend
kickstand, and make sure vehicle is stable.
2. Turn off the motorcycle.
3. Verify that Digital Wrench II version 1.0.24 or later
has been installed on your PC or laptop.
Also confirm that your multilink has been set up to
Direct to USB.
For installation instructions, Click HERE to view the
Digital Wrench II user manual or visit “Other
Publications” on the left navigation menu of the DEX
STOP site.
8. Put the motorcycle in 1st gear. Click continue button
to finish.
4. Connect MultiLink XP cables to PC and motorcycle.
Then power on the motorcycle. Do NOT start.
CAUTION
Make sure the vehicle has sufficient battery voltage and
is connected to a battery tender before the reflash.
Failure to do so may result in a reflash crash and
damage the VCM.
NOTICE
5. Open the Digital Wrench II application.
6. Select Auto Identify.
If I-20-03 has not been completed, the value could be
different. Please refer to I-20-03.
9. Select VEHICLE1. Then select Update ECU.
NOTICE
Digital Wrench II will automatically identify current
software and determine if an update is required.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 11 of 13
10. Select Continue.
11. Once the update is complete, select the continue
button then clear any trouble codes and power cycle
the motorcycle.
12. Check / clear any stored fault codes, disconnect
Digital Wrench and test ride the motorcycle.
NOTICE
Following the VCM reflash, some customers may notice
a slight delay in illumination of their fog lights (if
equipped) during vehicle use. This is normal and is
intended to reduce current flow through the VCM
13. File a claim for I-19-02-A
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 12 of 13
I-19-02-B
IMPORTANT
US/CAN Dealers: Submit an Ask Polaris Service & Warranty Question > Vehicle Diagnostic Question case.
INT’L Dealers: Contact your Country Service Department.
Submit photos of the dark halo present around VCM pin 11 on the white terminal lock plate and wait for
further instructions from Indian Motorcycle Technical Service.
Do not allow the machine to be operated until you have
repaired the machine as directed by Technical
Service.
If damage is present at Pin 11, do not file a warranty
claim until directed by Indian Motorcycle Technical
Service.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-19-02 (R04)
© 2020 Polaris Inc.
Page 13 of 13
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: I-19-02-A/B/C
Replacement Service Bulletin Number:
MFR Communication Date: 2022-08-29
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EXTERIOR LIGHTING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.