07-209-22R Service Bulletin/Repair Instructions

ATTENTION:

GENERAL MANAGER

PARTS MANAGER

CLAIMS PERSONNEL

IMPORTANT - All

Service Personnel

Should Read and

Initial in the boxes

provided, right.
SERVICE MANAGER

© 2022 Subaru of America, Inc. All rights reserved.
SERVICE BULLETIN

APPLICABILITY:
2022MY Forester
NUMBER: 07-209-22R

DATE: 08/23/22
SUBJECT: EyeSight® Reprogramming

		 DTC B28A6 Internal Stereo Camera

		 Communication 1

INTRODUCTION:
REVISED: 08/26/22
This bulletin announces new software available for the EyeSight® Stereo Camera Assembly. This

new logic contains an enhanced self-diagnosis program to prevent any inaccurate detection of DTC

B28A6 (Internal Stereo Camera Communication 1) within the fault memory. If this fault is detected,

reprogram the EyeSight® Stereo Camera Assembly using the reprogramming procedure outlined

within this bulletin.

PRODUCTION CHANGE INFORMATION:

The production change information is currently TBD.

PACK FILE APPLICABILITY:

Model
Model Year
File Name
Decryption Keyword
Forester
2022
87501SJ410.pk2
DC73A5C4
This file has been included in the July 2022 SSM software update.

SERVICE PROCEDURE / INFORMATION:

Reprogramming Preparation:

A. Confirm there are no faults within the EyeSight® system. If there are any faults, they must

be diagnosed, repaired, and cleared prior to reprogramming. Fully exit SSM prior to starting

FlashWrite 2.

B. Apply the Electronic Parking Brake (EPB). Switch the ignition switch to the “ON” position

(engine off). Using the gear selector lever, set the vehicle in the Neutral (N) range. Wait at

least 5 minutes after completing this step before proceeding.

CRITICAL: If the gear selector is in the Park (P) range, it is possible for the ignition switch to

turn off automatically while reprogramming after approximately 60 minutes. This will cause the

reprogramming procedure to fail.

CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD

RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.

Subaru Service Bulletins are intended for use by professional technicians ONLY. They

are written to inform those technicians of conditions that may occur in some vehicles,

or to provide information that could assist in the proper servicing of the vehicle. Properly

trained technicians have the equipment, tools, safety instructions, and know-how to

do the job correctly and safely. If a condition is described, DO NOT assume that this

Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is

ISO 14001 Compliant

ISO 14001 is the international standard for

excellence in Environmental Management

Systems. Please recycle or dispose of

automotive products in a manner that is friendly

to our environment and in accordance with all

local, state and federal laws and regulations.
Continued...

Bulletin Number: 07-209-22R; Revised: 08/26/22
Page 1 of 6
DO NOT operate SSM during reprogramming.

DO NOT have the engine running during reprogramming.

D. Confirm the PC being use for reprogramming is connected to a known good power source. Turn

off any screen saver settings. Make sure the PC is not in power saving mode and is set to the

normal power mode.

E. Confirm all electrical loads are switched off such as climate control, seat heater, audio system, etc.

F. Connect Subaru Midtronics DCA8000 Dynamic Diagnostic Charging System or the Subaru

Midtronics GR8-1100 Diagnostic Battery Charger to the vehicle set up to utilize the Power

Supply Mode feature to supply a stable 13.5 volts.

Reprogramming Prerequisites:

STEP 1:
Confirm the EyeSight® Stereo Camera assembly is suitable for reprogramming.

Using the Data Monitor feature within SSM, select the following signal items.
1. Camera Failure 5

2. Control Software Version

3. Recognition Software Version

4. ECU power Supply Voltage (IG)

5. Failure Detail Code

6. Camera Temperature
STEP 2:
Confirm the following Data Monitor Values prior to any attempt to reprogram:

1. Camera Failure 5 is “0000000B”

2. Control Software Version is “0421011E”

3. Recognition Software Version is “07210004”

4. ECU Power Supply Voltage (IG) is 13.5 Volts

5. Failure Detail Code is C213

NOTE: If Failure Detail Code C213 is not displayed, check the fault freeze frame data

(FFD) of B28A6. If C213 is listed in the FFD, the parameter has been met.

6. Camera Temperature is less than 176 degrees Fahrenheit (80 degrees Celsius)
Continued...

Bulletin Number: 07-209-22R; Revised: 08/26/22
Page 2 of 6
Reprogramming Procedure:

•
Reprogram the EyeSight® Stereo Camera assembly following the normal FlashWrite

procedure.
Subaru of America, Inc. (SOA) highly recommends connecting either the Subaru Midtronics DCA8000 Dynamic Diagnostic Charging System or the Subaru Midtronics GR8-1100 Diagnostic Battery

Charger to the vehicle and utilizing the Power Supply Mode feature anytime a vehicle control module

is being reprogrammed. Once the Midtronics charger is connected to the vehicle, if the battery is fully

charged, it takes less than three (3) minutes to boot-up the charger, select the Power Supply Mode,

and have the battery voltage stabilized and ready for reprogramming.

NOTES:

•
For instructions on using the power supply mode, reference the applicable User Manual for the
•
Midtronics DCA-8000 Dynamic Diagnostic Charging System and the Midtronics GR8-1100

Diagnostic Battery Charger on STIS.
•
Confirm all electrical loads such as lights, audio, HVAC, seat heaters, and rear defroster are all

switched OFF before setting up the charger for Power Supply Mode.
•
Select the correct battery type (Flooded, EFB, Gel, AGM or AGM Spiral).
•
Input the CCA which matches the vehicle’s battery. NOTE: OE and replacement batteries have

different CCA ratings. Always confirm the battery’s CCA rating before proceeding.
•
If using a DCA-8000 Dynamic Diagnostic Charging System, set the power supply voltage to

13.5 volts.
•
DO NOT connect the DST-I, DST-010, or SDI until the Power Supply mode function has

completed its battery test mode and the Charging Voltage has dropped to and shows a steady

13.5 Volts on
•
the display.
•
Once Power Supply Mode reaches a steady 13.5 volts, connect the DST-I, DST-010, or SDI to

the OBD connector and proceed with initiating the normal FlashWrite reprogramming process.
•
Amperage will fluctuate based upon the vehicle’s demand for power. NOTE: If the voltage

rises beyond 14V while programming is in process, the procedure will abort. This can indicate

a need to test or charge the vehicle battery before any further attempt at programming is made.
REMINDER: If the DCA-8000 or GR8-1100 indicates the vehicle’s battery must be charged, charge

the battery fully before proceeding to reprogram the vehicle while using the Power Supply Mode.

NOTE: Control module failures resulting from battery discharge during reprogramming are not a

matter for warranty. Should any DTCs reset after the reprogramming update is performed, diagnose

per the procedure outlined in the applicable Service Manual.
Continued...

Bulletin Number: 07-209-22R; Revised: 08/26/22
Page 3 of 6
VERY IMPORTANT:

This information is applicable to the Subaru Midtronics DCA-8000 Dynamic Diagnostic Charging

System and the Subaru Midtronics GR8-1100 Diagnostic Battery Charger ONLY. It does not apply to

any other brand / type of “generic” battery charger whatsoever. ONLY the DCA-8000 and the GR81100 and their Power Supply Mode feature have been tested and approved by SOA.

Reprogramming Confirmation:

STEP 1:
Confirm the EyeSight® Stereo Camera assembly reprogramming has been performed

SUCCESSFULLY. Using the Data Monitor feature within SSM, select the following

signal items.
7. Control Software Version

8. Recognition Software Version
STEP 2:
Confirm the following Values:

1. Control Software Version is “04210801”

2. Recognition Software Version is “07210802”
IMPORTANT: If the reprogramming procedure is unsuccessful, ONLY one additional

reprogramming attempt is to be made. Refer to the table below if an error code is displayed. If the

reprogramming procedure is unsuccessful after TWO attempts, the EyeSight® stereo camera will

require replacement.

Error Code Information:

In the event of an unsuccessful reprogramming attempt, an error code may be displayed. Pictured

below is a description of the codes and the correct course of action if encountered.
Continued...

Bulletin Number: 07-209-22R; Revised: 08/26/22
Page 4 of 6
No
Error Code
Content
Procedure
1
00000001
Parameter Error
Confirm the software version has been updated.

If the software has been updated successfully, ignore this error code, and

clear the fault memory. If not, make ONE attempt to reprogram.
2
00000009
Communication Error
3
00000281
Star Download Error
4
00000282
Data Transfer Error
5
00000283
Transfer Complete Error
6
00000284
Checksum Error
7
00000270
Unit Confirmation Error
Turn ignition switch off and wait 10 seconds. Turn on the ignition switch.

Resume the reprogramming work without exiting the FlashWrite2 at

password entry screen.
Confirm the reprogramming precautions & requirements are fully meet. If

there is no problem, turn ignition switch off and wait for 10 seconds. Turn

on the ignition switch. Exit FlashWrite 2 and start it from the beginning.
PART INFORMATION:

If EyeSight® Stereo Camera assembly replacement is required for any reason, it is important to

confirm the replacement parts contain the updated software. This can be confirmed by the pink

colored sticker located on the camera assembly. If the sticker is present, the software has been

updated.

Part Description
Part Number
CAMERA ASSEMBLY
87501SJ410
WARRANTY / CLAIM INFORMATION:

For vehicles within the Basic New Car Limited, or covered by an active Subaru Added Security

Classic or Gold plan, this repair may be submitted using the following claim information:

Labor Description
Labor Operation #
Labor Time
VERSION CHECK & REPROGRAMMING
A167-718
1.3
VERSION CHECK & REPROGRAMMING (2 TIMES)
A167-728
2.1
VERSION CHECK & REPROGRAMMING (2 TIMES &

FAILED) STEREO CAMERA REPLACEMENT
A167-701
3.5
Fail Code
ZQW-48
Continued...

Bulletin Number: 07-209-22R; Revised: 08/26/22
Page 5 of 6
NOTE: The PAK file listings provided in this bulletin are the latest available at the time of publishing.

Updates are often released thereafter without revision to the original bulletin. For this reason, it is critical to

always have the latest version of Select Monitor software installed on your system.
IMPORTANT REMINDERS:

•
SOA strongly discourages the printing and/or local storage of service information as previously

released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 07-209-22R; Revised: 08/26/22
Page 6 of 6

SaleBestseller No. 1

OBD2 Scanner Diagnostic Tool XTOOL Anyscan A30M V2.0, 2026 Wireless Bidirectional Scan Tool with Free Updates, 26 Resets, All System for Android & iPhone, Crank Sensor Relearn, EPB, Throttle Relearn

Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
Portable Car Scanner with 26 Resets: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
Wide Compatibility CAN FD & FCA Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it.
Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.

SaleBestseller No. 2

XTOOL Anyscan A30D OBD2 Scanner Diagnostic Tool - Bidirectional Scan Tool Wireless - Lifetime Updates & 19 Resets Crank Sensor EPB Throttle Relearn - Full System Car Code Reader for iPhone & Android

Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first

SaleBestseller No. 3

XTOOL D7 Bidirectional Scan Tool: 2026 Ai-Assisted OBD2 Scanner Diagnostic Tool with 36+ Resets, Full System Car Scanner with EPB, Injector Test, Throttle, Crank Sensor Relearn, FCA, CANFD & DoIP

2026 Latest Version – Now Upgraded from 32GB to 64GB: XTOOL D7 obd2 scanner diagnostic tool with bidirectional is designed for DIY enthusiasts, professional mechanics. It now offers 64GB storage for smoother operation. Its 5000mAh battery (with 2500mAh 7.3V fast-charging) supports all-day use. With FCA, CAN FD, and DOIP protocol support, it covers more vehicle models and newer systems. A newly added battery voltage reading shows battery status before diagnostics, helping prevent low-voltage tests that could harm the vehicle. The V2.0 Diagnostic Report allows shops to personalize results with logos, customer details, and attachments to build trust and maintain records.
Save $500+/Year with Pro-Level Diagnostics: Whether you're a DIYer, starting a repair business, or beginning work at an auto shop, XTOOL D7 car scanner offers advanced features typically found only in expensive professional OBD2 scanners - without the high price tag. With 4,000+ Active Tests & Bidirectional Pids, 36+ Special Functions, advanced module resets like SRS Reset, OE-level All-System Scan (one-click), FCA AutoAuth, CAN FD, DoIP, data export, and 8 PIDs graphing, the D7 auto scan tool covers 100,000+ vehicles (excluding Indian models). Includes 3-Year updates and supports the XV200 endoscope to detect em!ssions and intermittent issues.
Full Bidirectional Advantage Over Other Code Readers & Scan Tools: The XTOOL D7 automotive scanner offers true bidirectional control plus advanced bidirectional PIDs, letting you send commands to components like A/C clutches, fuel injectors, windows, fans and more, while monitoring sensor responses live to catch elusive issues (even those without warning lights). Unlike budget bidirectional obd2 scanners limited to basic active tests,the D7 car fault scanner gives you full bidirectional control to run ABS pump tests, throttle position, turn fan on/off and solenoid tests, etc. No guessing, no extra fees—just smarter diagnostics
OE-Level Full System Car Diagnostic Scanner with 8 Live Data Graphs: The XTOOL D7 is a pro-grade diagnostic tool that gives you full access to all vehicle systems—just like Snap on scanners & the factory scan tools, it delivers deep, accurate diagnostics you can trust. Easily view live data streams, retrieve freeze frame, and run active tests to pinpoint issues fast. With the ability to graph up to 8 PIDs at once, you can spot performance trends and troubleshoot like a pro. Whether you're a mechanic or car owner, with the D7 auto scanner you can stay ahead of problems and keep your vehicle running at its best
High-value Automotive Scanner Diagnostic Tool with 36+ Special Function, Module Resets, Relearns, Calibrations, Adaptations & Initializations: XTOOL D7 diagnostic tool packs 36+ common & advanced maintenance, skip the $150 fee for battery registration after replacement, throttle body relearn after cleaning, or TPMS resets post-rotation, Auto bleed after the pad changes, or Electronic Parking Brake. Need to reset the transmission after towing? Crank sensor relearn for GM/for Dodge? Done. D7 also covered advanced functions like Ad~blue Reset, VIN Write, and many more professional OBD2 scanner functions that we can't list here. Text us your VIN + what you need, we’ll check the compatibility

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor