NHTSA ID Number: 10218830
Manufacturer Communication Number: 32132750A
TSB/Document Date: 2022-08-29
Summary
Safety data sheet.
Service and Parts Business
Safety Data Sheet
32132750A
Emergency
Telephone No.: 1-888-255-3294 (U.S., Canada,
Puerto Rico and the U.S. Virgin Islands)
Polestar
Automotive USA Inc.
777 MacArthur Blvd
Mahwah, NJ 07430
Revision Date:
Printed:
Supersedes:
September 2019
2022-07-15
NOTE: Use the 24-Hour Emergency Telephone Numbers only in the event of a chemical emergency involving a spill, leak, fire, exposure, or accident involving chemicals. All non-emergency questions should be
directed to Polestar
Automotive USA Inc. at (800) 806-2504 (U.S.) or (800) 806-2507 (Canada) for assistance.
1.
IDENTIFICATION
PRODUCT NAME: PUR ADHESIVE
2.
SUPPLIER:
Polestar
Automotive Canada Inc.
9130 Leslie St.
Richmond Hill, ON L4B 0B9
PHONE No:
E-MAIL ADDRESS:
905-695-9626
sds@volvo
.com
websds.volvo.com
PART NO: 32132750A
HAZARDS IDENTIFICATION
Classification of the
substance or mixture:
RESPIRATORY SENSITIZATION - Category 1
SKIN SENSITIZATION - Category 1
GHS label elements
Hazard pictograms:
Signal word:
Hazard statements:
Danger
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction. Suspected of causing cancer.
Precautionary statements
General:
Prevention:
Not applicable.
Avoid breathing vapor. Wear protective gloves.
Produced and printed in the USA and available as an electronic document.
© Polestar
2022
32132750A
Safety Data Sheet
PRODUCT NAME:
PUR adhesive
Response:
Storage:
Disposal:
Other hazards which do not
result in classification:
Supplemental label elements:
3.
REVISION DATE:
September 2019
IF INHALED: Remove person to fresh air and keep comfortable for
breathing. IF exposed or concerned: Get medical attention. If experiencing
respiratory symptoms call a POISON CENTER or doctor/physician. Take off
contaminated clothing and wash it before reuse.
Not applicable.
Not applicable.
Not available.
Contains isocyanates. May produce an allergic reaction.
COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:
CAS number/other identifiers
Product code:
Mixture
32132750A
Ingredient name
Hexamethylene diisocyanate, homopolymer
4,4’-Methylenediphenyl diisocyanate
%
1-5
0-1
CAS number
28182-81-2
101-68-8
There are no additional ingredients present which, within the current knowledge of the supplier and in
the concentrations applicable, are classified as hazardous to health or the environment and hence require
reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
4.
FIRST-AID MEASURES
Description of first aid measures
Inhalation:
If breathing is difficult, remove to fresh air and keep at rest in a position
comfortable for breathing. Get medical attention.
Skin contact:
After contact with skin, wash immediately with plenty of soap and water.
Remove contaminated clothing and wash it before reuse. Get medical
attention if symptoms occur.
Eye contact:
In case of contact with eyes, rinse immediately with plenty of water.
Ingestion:
Get medical attention.
Most important symptoms/effects, acute and delayed
Potential acute health effects
Inhalation:
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin contact:
May cause an allergic skin reaction. Once sensitized, a severe allergic
reaction may occur when subsequently exposed to very low levels.
Eye contact:
May cause slight transient irritation.
Ingestion:
Ingestion may cause gastrointestinal irritation and diarrhea.
Symptoms related to the physical, chemical and toxicological characteristics
Inhalation:
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin:
Skin sensitization . Adverse symptoms may include the following: irritation,
redness
Page 2 of 9
32132750A
PRODUCT NAME:
Safety Data Sheet
PUR adhesive
REVISION DATE:
September 2019
Eyes:
May cause slight transient irritation. ( redness )
Ingestion:
Ingestion may cause gastrointestinal irritation and diarrhea.
Indication of immediate medical attention and special treatment needed, if necessary
Specific treatments:
No specific treatment.
Notes to physician:
In case of inhalation of decomposition products in a fire, symptoms may
be delayed. The exposed person may need to be kept under medical
surveillance for 48 hours.
Protection of first-aiders:
If it is suspected that fumes are still present, the rescuer should wear an
appropriate mask or self-contained breathing apparatus. Wash contaminated
clothing thoroughly with water before removing it, or wear gloves. Refer
to protective measures listed in sections 7 and 8. No action shall be taken
involving any personal risk or without suitable training.
See toxicological information (Section 11)
5.
FIRE-FIGHTING MEASURES
Extinguishing media
Suitable:
Not suitable:
Specific hazards arising from
the chemical:
Hazardous thermal
decomposition products:
Special precautions for
fire-fighters:
6.
Recommended: CO2, powders, foam.
Do not use water jet.
In a fire or if heated, a pressure increase will occur and the container may
burst.
Decomposition products may include the following materials:
nitrogen oxides
carbon oxides
Promptly isolate the scene by removing all persons from the vicinity of the
incident if there is a fire. Fire-fighters should wear appropriate protective
equipment and self-contained breathing apparatus (SCBA) with a full facepiece operated in positive pressure mode.
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
For non-emergency personnel: Avoid breathing vapor or mist. Provide adequate ventilation. Wear
appropriate respirator when ventilation is inadequate. Refer to protective
measures listed in sections 7 and 8.
For emergency responders:
If specialized clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in “For non-emergency personnel”.
Environmental precautions:
Avoid dispersal of spilled material and runoff and contact with soil,
waterways, drains and sewers. Inform the relevant authorities if the product
has caused environmental pollution (sewers, waterways, soil or air).
Page 3 of 9
32132750A
Safety Data Sheet
PRODUCT NAME:
PUR adhesive
REVISION DATE:
September 2019
Methods and materials for containment and cleaning up
Spill:
Stop leak if without risk. Contain and collect spillage with non-combustible,
absorbent material e.g., sand, earth, vermiculite or diatomaceous earth and
place in container for disposal according to local regulations.
Reference to other sections:
See Section 1 for emergency contact information.
See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
7.
HANDLING AND STORAGE
Precautions for safe handling
Protective measures:
Advice on general
occupational hygiene:
Use only with adequate ventilation. Wear appropriate respirator when
ventilation is inadequate. Put on appropriate personal protective equipment
(see Section 8). Do not get in eyes or on skin or clothing. Empty containers
retain product residue and can be hazardous. Do not reuse container. Do not
ingest. Wash thoroughly after handling. Avoid breathing gas, vapor or spray.
Medical surveillance should be considered before handling this product.
Wash hands, forearms and face thoroughly after handling chemical products,
before eating, smoking and using the lavatory and at the end of the working
period. Wash contaminated clothing before reuse.
Conditions for safe storage,
including any incompatibilities: Do not store in unlabeled containers. Keep container tightly closed. Keep
container in a cool, well-ventilated area.
8.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Occupational exposure limits
Ingredient name
Occupational exposure limits
carbon black, non respirable
CA British Columbia Provincial (Canada, 5/2015).
TWA: 3 mg/m³ 8 hours. Form: Inhalable
CA Ontario Provincial (Canada, 7/2015).
TWA: 3 mg/m³ 8 hours. Form: Inhalable fraction.
CA Alberta Provincial (Canada, 4/2009).
8 hrs OEL: 3,5 mg/m³ 8 hours.
CA Quebec Provincial (Canada, 1/2014).
TWAEV: 3,5 mg/m³ 8 hours.
CA Saskatchewan Provincial (Canada, 7/2013).
STEL: 7 mg/m³ 15 minutes.
TWA: 3,5 mg/m³ 8 hours.
Page 4 of 9
32132750A
PRODUCT NAME:
Safety Data Sheet
PUR adhesive
4,4’-Methylenediphenyl diisocyanate
Appropriate engineering
controls:
REVISION DATE:
September 2019
CA Alberta Provincial (Canada, 4/2009).
8 hrs OEL: 0,005 ppm 8 hours.
8 hrs OEL: 0,05 mg/m³ 8 hours.
CA British Columbia Provincial (Canada, 5/2015).
Absorbed through skin. Skin sensitizer.
TWA: 0,005 ppm 8 hours.
C: 0,01 ppm 15 minutes.
CA Quebec Provincial (Canada, 1/2014). Skin
sensitizer.
TWAEV: 0,005 ppm 8 hours.
TWAEV: 0,051 mg/m³ 8 hours.
CA Ontario Provincial (Canada, 7/2015).
TWA: 0,005 ppm 8 hours.
CA Saskatchewan Provincial (Canada, 7/2013).
STEL: 0,015 ppm 15 minutes.
TWA: 0,005 ppm 8 hours.
Use only with adequate ventilation. Where reasonably practicable, this
should be achieved by the use of local exhaust ventilation and good general
extraction.
Environmental exposure
controls:
Do not allow to enter drains or watercourses.
Individual protection measures
Hygiene measures:
Wash hands, forearms and face thoroughly after handling chemical products,
before eating, smoking and using the lavatory and at the end of the working
period. Wash contaminated clothing before reusing.
Personal protective equipment
Respiratory protection:
Provide adequate ventilation. In case of insufficient ventilation, wear suitable
respiratory equipment.
Hand protection:
Chemical-resistant, impervious gloves complying with an approved standard
should be worn at all times when handling chemical products if a risk
assessment indicates this is necessary.
Eye protection:
Safety eyewear complying with an approved standard should be used when
a risk assessment indicates this is necessary to avoid exposure to liquid
splashes, mists, gases or dusts.
9.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical state:
Color:
Odor:
Odor threshold:
pH:
Melting point:
Pour point:
Boiling point:
Liquid. [Paste.]
Black.
Characteristic.
Not available.
Not available.
Not available.
Not available.
Not available.
Page 5 of 9
32132750A
Safety Data Sheet
PRODUCT NAME:
PUR adhesive
Flash point:
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 32132750A
Replacement Service Bulletin Number:
MFR Communication Date: 2022-07-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




