NHTSA ID Number: 10218721
Manufacturer Communication Number: SA-041-22
TSB/Document Date: 2022-09-06
Summary
Some customers may complain about infotainment center display: - Ghost Touch (Touch screen operates by itself) - Surface Peeling - Spider Cracks Repair kits are available to replace just the screen. There is no need to replace the entire infotainment display unit.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-041-22
Replacement Service Bulletin Number:
MFR Communication Date: 2022-08-17
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
BULLETIN NOTES
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red.
Previous TSBs:
Date(s) Issued:
SA-041/22
06/22/22
APPLICABLE MODEL(S)/VINS
2014-2016 Mazda3
2016 Mazda6 (equipped with Center Display Part Number GRT7-61-1J0 or GRT7-61-1J0A)
2017-2021 Mazda6
2017-2020 CX-5 (equipped with Center Display Part Number K123-61-1J0 or K123-61-1J0A)
Page 1 of 24
08/25/2022 01:29 PM cciz
DESCRIPTION
Some customers may complain about infotainment center display:
• Ghost Touch
(Touch screen operates by itself)
• Surface Peeling
• Spider Cracks
Repair kits are available to replace just the screen. There is no need to replace the entire infotainment display unit.
Customers having this concern should have their vehicle repaired using the following repair procedure.
Page 2 of 24
08/25/2022 01:29 PM cciz
REPAIR PROCEDURE
Index
Model
Year
Surface Peeling Spider Cracking
Go to Mazda3
Repair
Go to Mazda3
Repair
Go to TSB 09021/22
Go toTSB 09021/22
Go toTSB 09021/22
Go to Mazda6
Repair
Go to Mazda6
Repair
Go to Mazda6
Repair
2017-2020
with VINs lower than JM3KF******869655
Go to TSB 09produced before August 25, 2020)
003/22
equipped with Center Display Part Number K123-61-1J0
or K123-61-1J0A
Go to TSB 09003/22
Go to CX-5
Repair
2014-2016
2016
equipped with Center Display Part Number GRT7-611J0 or GRT7-61-1J0A
2017
with VINS lower than JM1GL******156205
produced on or before December 29, 2017)
2017-2022
with VINS higher than JM1GL******156205
produced after December 29, 2017)
CX-5
Ghost Touch
Go to SSPB6
Mazda3
Mazda6
Symptom
1. Verify the customer concern.
2. Disassemble the center display and replace the lens (inner part) with a newly established part according to the
following steps:
NOTE: Wear the rubber gloves to protect the lens, cable and electronic circuit.
Repair parts set:
No.
Description
Qty.
Notes
(1)
Center Display Lens
1
Cushion materials for packa
ging are used to protect the l
ens surface when disassem
bled.
(2)
1
Anti-static
Page 3 of 24
08/25/2022 01:29 PM cciz
NOTE:
• Center display lens is packaged in bubble wrap and cushion material.
• Unwrap the package carefully so the cushion material can be used to protect the lens surface when disassembling
the center display.
• The center display lens is equipped with cables (FPC: Flexible Printed Circuit), so be careful when handling it.
(1) Bubble wrap
(2) Cushion material
CENTER DISPLAY DISASSEMBLY:
Remove the center display according to the instructions on MGSS:
• Mazda3 - CENTER DISPLAY REMOVAL/INSTALLATION
• Mazda6 - CENTER DISPLAY REMOVAL/INSTALLATION
• CX-5 - CENTER DISPLAY REMOVAL/INSTALLATION
Page 4 of 24
08/25/2022 01:29 PM cciz
Mazda3 Repair
1. Remove the 4 screws (1), then remove the connectivity master unit (CMU) (2) from the center display (3).
2. Place the cushion sheet (1) that wrapped lens before, on a clean, flat surface.
3. Put on the rubber gloves.
4. Place the center display (2) on the cushion sheet (1) with the display side facing downward.
5. Remove the 4 screws from the center display cover panels.
Page 5 of 24
08/25/2022 01:29 PM cciz
6. Remove the lower cover panel by pulling it up off the bracket, then lift off the back cover panel.
7. Remove the 4 screws from the bracket.
8. Unlock the bracket with a flat head screw driver by carefully prying out and upward on the bracket.
CAUTION: DO NOT pry on the printed circuit board.
Page 6 of 24
08/25/2022 01:29 PM cciz
9. Remove the bracket.
10. Unlock and disconnect the printed wiring harness.
11. Remove the electric circuit board (1) from the display lens (2).
CAUTION: Be very careful handling the electric circuit board as it will be reused.
Page 7 of 24
08/25/2022 01:29 PM cciz
12. Assemble the modified display lens with the removed electric circuit board.
Inside lens surface
Outside lens surface
NOTE 1:
• Peel off the protection film from the inside lens surface when replacing.
• Peel off the protection film on the outside lens surface after installing the center display to the vehicle.
NOT GOOD
OK
NOTE 2: Solidly connect the printed wiring harness to the connector in order to avoid the half insertion of the printed
wiring harness.
13. Install the center display in the reverse order of removal.
NOTE: DO NOT tighten the screws too tightly, but tighten them so that they do not come loose.
14. Verify the repair.
Page 8 of 24
08/25/2022 01:29 PM cciz
Mazda6 Repair
1. Check the Center Display Part Number (1-2).
Is the Part Number GRT7-61-1J0 or GRT7-61-1J0A?
• Yes - Go to next step.
• No - This service information does not apply. Replace the Center Display unit. Go to MGSS CENTER DISPLAY
REMOVAL/INSTALLATION
2. Remove the 4 screws (1), then remove the connectivity master unit (CMU) (2) from the center display (3).
3. Place the cushion sheet (1) that the lens was wrapped on a working table.
4. Put on the rubber gloves.
5. Place the center display (2) on the cushion sheet (1) with the display side facing downward.
Page 9 of 24
08/25/2022 01:29 PM cciz
6. Remove the 4 screws (1) that assemble the center display (2) and the bracket (3), then separate the bracket (3) and
the cover panel (4).
7. Remove the 2 screws (1) on the back of the center display.
Page 10 of 24
08/25/2022 01:29 PM cciz
8. Insert a tip of a flathead screwdriver (3) in the gap (2) between the lens and the rear cover.
Detail of (1)
Page 11 of 24
08/25/2022 01:29 PM cciz
9. Pull up the rear cover with a flathead screwdriver (1) while being careful to not touch the connector, then remove the
rear cover.
CAUTION: Be careful not to damage the circuit board and the connectors when removing the rear cover.
Pull the rear cover outward so that the cover does not touch the connectors.
Center display (joint with rear cover)
Rear cover (joint with center display)
Page 12 of 24
08/25/2022 01:29 PM cciz
10. Remove the 4 screws (circled in yellow).
11. Push the locking tab (2) on the connector (1) to unlock it while pushing the circuit board, then remove the cable (FPC:
Flexible Printed Circuit) (3).
Page 13 of 24
08/25/2022 01:29 PM cciz
NOTE: Pull out the cable by holding both side-edges of it to avoid damaging the cable.
12. Remove the center display from the lens.
13. Replace the lens with a modified one, reusing the center display
Replace the lens with a modified one.
Reuse the center display.
14. Assemble the center display in the reverse order of disassemble.
NOTE:
• DO NOT tighten the screws too tightly, but tighten them so that they do not come loose.
• When attaching the cable to the circuit board, be careful not to engage with the connector half-fit.
15. Install the center display in the reverse order of removal.
16. Verify the repair.
Page 14 of 24
08/25/2022 01:29 PM cciz
CX-5 Repair
1. Check the Center Display Part Number (1-2).
Is the Part Number K123-61-1J0 or K123-61-1J0A?
• Yes - Go to next step.
• No - This service information does not apply. Replace the Center Display unit. Go to MGSS CENTER DISPLAY
REMOVAL/INSTALLATION
2. Remove the 4 four screws (1), then remove the connectivity master unit (CMU) (2) from the center display (3).
3. Place the cushion material (1) that the lens was wrapped in, on a workbench.
4. Put on the rubber gloves.
5. Place the center display (2) on the cushion material (1) with the display side facing downward.
Page 15 of 24
08/25/2022 01:29 PM cciz
6. Remove the 4 screws (1) that assemble the center display (2) and the bracket (3), then separate the bracket (3) and
the cover panel (4).
7. Remove the 2 screws (1) that assemble the center display and the rear cover (2).
Page 16 of 24
08/25/2022 01:29 PM cciz
8. Remove the rear cover according to the following steps.
• There are 3 three fitting sections of the rear cover and the center display.
• The number in the image below is the order in which to unhook the ribs.
Rear cover
Center display
Page 17 of 24
08/25/2022 01:29 PM cciz
a. Unhook rib (1) by inserting the tip of a flathead screwdriver in the gap (2) between the lens and the rear cover
below connectors (4), then unhooking the rib (3).
Rib (3) of the rear cover
Rib (3) of the rear cover
Hook (5) of the center display
Page 18 of 24
08/25/2022 01:29 PM cciz
b. Unhook rib (2) by inserting the tip of a flathead screwdriver in the gap (2) between the lens and the rear cover,
then unhooking the rib.
c. Unhook rib (3) by inserting the tip of a flathead screwdriver in the gap (3) between the lens and the rear cover,
then unhooking the rib.
Page 19 of 24
08/25/2022 01:29 PM cciz
9. Pull up the rear cover (1) carefully so that the rib (3) does not touch the connectors (2), then remove the rear cover.
Rear cover
Center display
Page 20 of 24
08/25/2022 01:29 PM cciz
10. Remove the 4 screws shown below.
Bracket
Center display
11. Remove the cable (FPC: Flexible Printed Circuit) in order (1), (2), (3) as shown in the image below.
NOTE: To unlock the connector, pull up the locking tab while holding the circuit board.
Page 21 of 24
08/25/2022 01:29 PM cciz
ATTENTION: Pull out the cable by holding both side-edges to avoid damaging the cable.
-->
Locked
Unlocked
-->
(1) Cable
(2) Locking tab
12. Remove the center display from the lens.
13. Replace the lens with a modified one, but reuse the center display
Lens
Center display
Page 22 of 24
08/25/2022 01:29 PM cciz
14. Assemble the center display in the reverse order of disassembly.
NOTE:
• When attaching the cable to the circuit board, be sure the connection is secure.
• DO NOT use electric tools to tighten the screws. Overtightening the screws (circled in yellow in the following
figures) may cause uneven
brightness of the display. If uneven brightness occurs, loosen the screws and retighten them to the point to avoid
coming loose.
Example of the uneven brightness:
Page 23 of 24
08/25/2022 01:29 PM cciz
15. Install the center display in the reverse order of removal.
16. Verify the repair.
PARTS INFORMATION
Year
Model
Parts
Number
20142016
Mazda3
BHY161-1JZ
DisplayAssembly
(Repair Kit)
1
2016
Mazda6
Equipped with
Center Display P/N
GRT7-61-1J0 or
GRT7-61-1J0A
GRY761-1JZ
DisplayAssembly
(Repair Kit)
1
20172022
Mazda6
GRY761-1JZ
DisplayAssembly
(Repair Kit)
1
20172020
CX-5
Equipped with
Center Display P/N
K123-61-1J0
or K123-61-1J0A
K1Y3-611JZ
DisplayAssembly
(Repair Kit)
Description Qty.
1
Note 1
Note 2
---
Vehicles equipped with center
display P/N GML8-611J0 do not
apply to this service information.
---
Includes a center
display lens and
antistatic rubber
gloves.
Vehicles equipped with center
display P/N K123-61-1J0B or later
suffix are already modified and
do not apply to this service
information.
WARRANTY INFORMATION
Vehicles outside of SSPB6, 09-021/22 and 09-003/22 VIN range, use normal warranty process.
Page 24 of 24
08/25/2022 01:29 PM cciz
- 💝【Questions? We’re Here Anytime】MK808S is a high-end flagship model that connects via wired OBD2 for faster, more stable, and reliable diagnosis compared to B,.T tools. If you have any questions about setup, activation, features, additional accessories, or update subscriptions, please reach us and we will respond promptly to assist you. It includes 1-Year F.ree Updates (124.5 bucks/year after), and most functions still work after expiration except a few online features. Please note some functions like full TPMS are not supported, reach us for model recommendations.
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2026 upgraded version of MaxiChek MX808 MaxiDiag MD909 Pro MD906 Pro, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective scanner (without breaking the bank, same as MK900BT MS906 PRO MS906MAX). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, work as MX900, MK900, MK900-BT, supports 150+ car brands worldwide. Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including 0il Reset, SAS Calibration, ABS Bleeding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2025 to 2026.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, displays 5-in-1 Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its Aut0V1N technology, you can check your car's make, model, and year information with just one click. The Aut0Scan feature automatically scans all of the vehicle's modules and detects any fault codes. Check Aut0V1N compatibility by reaching us at 📞1-833-436-5880. Available Mon-Fri, 9 AM-6 PM EST.
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If you encounter Blueto-oth adapter VCI150 malfunction, please tell us 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
, This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API