S.A.T.

180 MV

area

n°

Service Bulletin
Circolare Tecnica - Technisches Rundschreiben - Circulaire Technique - Circular Tecnica
Date:

15 March 2017

Subject:

New ECU Software

Product:

DRAGSTER 800 MY 2014 until VIN … V007593 included

This bulletin cancels and replaces the previous service bulletin No. 161.
With the following Technical Communication, we inform you that a new mapping update is now
available.for the DRAGSTER 800 MY 2014.
The contents of the new map update introduce improvements on the electronic throttle control and
engine cranking strategies.
We recommend to pay the maximum attention in choosing the correct map on the interested
motorcycle model, model year and version.
If you have any doubt on the choice of the correct mapping, we advise you to contact your MV
Agusta After Sales Area Manager.
The installation of a different map from the expected one will be at the exclusive responsibility of the
Dealer.
MV AGUSTA MOTOR S.p.A. declines therefore all responsibilities for any consequence (Civil and/or
Penal and/or Administrative) that the Dealer or third persons might support due to the modification of
the motorbike ECU and/or a different utilization of the motorbike that is contrary to limits and
prohibitions provided from the local Law and Regulation concerning homologated power of
motorbikes that are destined to be used on public roads.
We ask you to provide for the control and eventual remapping during the set-up
and before consignment to the customer, during a service operation or at the first convenient
opportunity at your workshop.
TOOLS NECESSARY FOR THE UPDATE:
TEXA Navigator IDC4 with software multi brand and cable 3151/AP34.
 Re-mapping the ECU:
- Update your TEXA Navigator IDC4 instrument by connecting it to the internet with the software
IDC4, select “Software check” and begin the download of the version 26.0.0.A
- check that the battery voltage is higher than 12.5 V and keep the battery charger connected during
the entire duration of reprogramming operations.
- Select “Bike – Diagnosis – Motorcycles - MV Agusta” and the desired motorcycle model,
- Press “ECU Update” followed by “Injection Reprogramming” and then the ECU ELDOR
- Select “self diagnosis”.
- Connect to the motorcycle following the instructions of the program and then select “MAPPINGS”.
The installation of the new mapping needs boot BTMV4D-0300 before reprogramming: check the
Presence of BTMV4D-0300.
After the BOOT checking proceed with the installation of the map:
Service Bulletin n° 180 - SW ECU Dragster 800 MY 2014

1/2

DRAGSTER 800 MY 2014:
 European version: “0516D011” to be activated with password “NEMO#77f73117”
 French version: “0516DA11” to be activated with password “NEMO#78m7me17”
 Usa\Canada version: “0516DB11” to be activated with password “NEMO#79te4s17”
 Japanese version: “0516DC11” to be activated with password “NEMO#806uw417”
 Brazil version: “0516DE11” to be activated with password “NEMO#82rdm217”
 China version: “0516DG11” to be activated with password “NEMO#835fxz17”
 Kit racing exhaust: “0516DW11” to be activated with the password available on the card
Follow the instructions to complete the installation.
- After the ECU flashing, verify in "ECU INFO" area that the code of the Calibration Version /
installed map is correct.
- Exit from current menu “ECU Update” and open menu “Self diagnosis”.
- Select “Petrol injection” and the ECU model.
- Select “Setting” and then “Reset self-adapting parameters” follow the instructions to complete the
operation.
- Start the engine and let idle until cooling fan turns on
- Test the motorcycle before consignment to the customer in order to verify the correct functioning.

Thank you in advance for your collaboration we’ll remain available for any support.

Best Regards,
MV AGUSTA MOTOR S.p.A.
Technical Service Department

Service Bulletin n° 180 - SW ECU Dragster 800 MY 2014

2/2